47 NCAA Flagship Wash Mesh MVP (Auburn Tigers)

47 NCAA Flagship Wash Mesh MVP Adjustable Hat User Manual - Auburn Tigers

Model: NCAA Flagship Wash Mesh MVP (Auburn Tigers)

1. Introduction

This manual provides essential information for the proper use and care of your 47 NCAA Flagship Wash Mesh MVP Adjustable Hat, featuring the Auburn Tigers design. Please read these instructions carefully to ensure the longevity and optimal condition of your hat.

2. Product Overview

The 47 NCAA Flagship Wash Mesh MVP Adjustable Hat is designed for comfort and durability. It features a primary team logo embroidered on the front, a mesh back for breathability, and an adjustable strap for a personalized fit. This hat is suitable for various casual occasions and everyday wear.

Front view of the 47 NCAA Flagship Wash Mesh MVP Adjustable Hat, Auburn Tigers edition, showing the embroidered team logo.

Figure 2.1: Front view of the 47 NCAA Flagship Wash Mesh MVP Adjustable Hat, Auburn Tigers edition, displaying the embroidered team logo.

Side view of the 47 NCAA Flagship Wash Mesh MVP Adjustable Hat, Auburn Tigers edition, showing the curved brim and mesh side panel.

Figure 2.2: Side view of the 47 NCAA Flagship Wash Mesh MVP Adjustable Hat, Auburn Tigers edition, highlighting the curved brim and breathable mesh side panel.

3. Setup: Adjusting Your Hat

Your 47 NCAA Flagship Wash Mesh MVP Hat features an adjustable snap closure at the back, allowing for a customized and secure fit.

  1. Locate the Snap Closure: On the back of the hat, you will find a plastic snap strap with a series of studs and holes.
  2. Adjust for Fit: Gently pull apart the two ends of the snap closure. Place the hat on your head.
  3. Secure the Closure: While wearing the hat, bring the two ends of the strap together and press the studs into the holes that provide a comfortable yet snug fit. Ensure the hat is not too tight to avoid discomfort, nor too loose that it might fall off.
Rear view of the 47 NCAA Flagship Wash Mesh MVP Adjustable Hat, showing the snap closure mechanism.

Figure 3.1: Rear view of the hat, illustrating the adjustable snap closure for a custom fit.

4. Operating: Wearing Your Hat

Once adjusted, the hat is ready for wear. Simply place it on your head with the brim facing forward. The mesh back promotes airflow, making it comfortable for extended periods.

5. Maintenance and Care

Proper care will help maintain the appearance and extend the life of your hat.

  • Cleaning: The manufacturer recommends machine washing for this hat. Use a gentle cycle with cold water and a mild detergent.
  • Drying: Air dry the hat by reshaping it and placing it on a clean, dry surface or a hat form. Avoid direct sunlight or high heat, as this can cause shrinkage or damage to the fabric and embroidery. Do not tumble dry.
  • Storage: Store your hat in a cool, dry place away from direct sunlight to prevent fading. Avoid crushing the hat to maintain its shape.

6. Troubleshooting

If you encounter any issues with your hat, consider the following:

  • Hat feels too tight or too loose: Re-adjust the snap closure at the back of the hat until a comfortable fit is achieved.
  • Hat loses shape after washing: Gently reshape the hat while it is damp and allow it to air dry on a hat form or a suitable rounded object to help it retain its original contour.
  • Fading: Exposure to prolonged direct sunlight can cause colors to fade over time. Store the hat away from direct sunlight when not in use.

7. Product Specifications

FeatureDetail
Product Dimensions4 x 4 x 3 inches
Item Weight4 ounces (3.6 ounces listed in some specifications)
DepartmentUnisex-adult
Fabric Type100% Cotton Front, 100% Polyester Mesh Back
Care InstructionsMachine Wash
OriginMade in the USA or Imported
Closure TypeSnap
Brand Name47
Team NameAuburn Tigers
League NameNCAA
Sport TypeCollege
Age Range DescriptionAdult
UPC195000817960
Item Type NameBaseball Cap
Hat Form TypeBaseball Cap
ColorAuburn Tigers
Occasion TypeCasual
Pattern StyleLetter Print
Style NameNcaa Flagship Mvp
Material TypeCotton Twill
Fit TypeFitted (Adjustable)
Water Resistance LevelNot Water Resistant

8. Warranty and Support

This product is covered by the standard manufacturer's warranty. For specific warranty details, returns, or support inquiries, please refer to the retailer where the product was purchased or visit the official 47 Brand website. Keep your proof of purchase for any warranty claims.

Contact Information:

  • For customer service, please contact the retailer.
  • Visit the official 47 Brand website for general product information: www.47brand.com

© 2026 47 Brand. All rights reserved. Information in this manual is subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.