Antetek Full Size Button Tufted Velvet Upholstered Daybed with Twin Roll-Out Trundle Instruction Manual

1. Introduction and Safety Information

Thank you for choosing the Antetek Full Size Button Tufted Velvet Upholstered Daybed with Twin Roll-Out Trundle. This manual provides essential instructions for assembly, operation, and maintenance to ensure safe and proper use of your new furniture.

Important Safety Warnings:

• Ensure the total weight on the daybed does not exceed 300 lbs.
• Ensure the total weight on the trundle bed does not exceed 300 lbs.
• Use mattresses with a thickness of 5-6 inches for both the daybed and trundle.
• Follow all assembly instructions carefully. Improper assembly can lead to instability and injury.
• Keep small parts away from children during assembly.
• Regularly check all connections and tighten them as needed.
• Do not stand or jump on the bed.

2. Package Contents

Before beginning assembly, please ensure all parts are present and undamaged. Refer to the included hardware list in your package for specific component identification.

Typical Components Include:

• Daybed frame (headboard, footboard, side rails)
• Trundle bed frame
• Wooden slats for both daybed and trundle
• Hardware pack (screws, bolts, washers, nuts, L-brackets, support legs, wheels)
• Assembly tools (e.g., Allen wrench)
• Instruction manual

3. Setup and Assembly Instructions

Assembly typically requires two adults. Please follow the steps below carefully. An assembly video is provided for visual guidance.

Assembly Video:

Video: Twin Size Daybed Installation Video by HMYFGD. This video demonstrates the assembly process for a similar daybed model, providing visual steps for connecting frame components and installing slats.

Step-by-Step Assembly (General Guide):

1. Unpack and Identify Parts: Lay out all components and hardware on a clean, soft surface. Compare them with the parts list in your manual.
2. Assemble Daybed Side Rails: Attach the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are secure.
3. Install Daybed Slats: Place the wooden slats across the daybed frame. Secure them using the provided screws or connectors. Ensure even spacing for proper mattress support.
4. Assemble Trundle Frame: Connect the trundle frame components. Attach the wheels to the bottom of the trundle frame.
5. Install Trundle Slats: Place the wooden slats across the trundle frame and secure them.
6. Insert Trundle: Carefully slide the assembled trundle bed under the main daybed frame.

Product Dimensions:

Image: Detailed dimensions of the Antetek Full Size Daybed with Trundle, showing overall length, width, height, and specific measurements for the daybed and trundle mattress areas. Maximum weight capacity of 300 lbs is also indicated.

4. Operating Instructions

The Antetek Daybed is designed for versatile use, functioning as a sofa, a single bed, or a double sleeping area with its pull-out trundle.

Using the Trundle Bed:

• To extend the trundle: Gently pull the trundle frame from underneath the main daybed. The wheels allow for smooth movement.
• To retract the trundle: Push the trundle frame back underneath the main daybed until it is fully stored.

Trundle Operation Video:

Video: Antetek Full Size Button-Tufted Daybed Frame with a Trundle by Cooboom. This video showcases the smooth pull-out and push-in mechanism of the trundle bed, demonstrating its ease of use.

Key Features:

Image: Close-up view highlighting the button-tufted design on the backrest and the stylish rivet trim along the armrests, emphasizing the elegant aesthetic of the daybed.

5. Maintenance

Proper care will extend the life and appearance of your daybed.

• Cleaning: The velvet upholstery should be dry cleaned only. For minor spills, blot immediately with a clean, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Frame Care: Regularly check all bolts and screws to ensure they are tight. Re-tighten if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading of the upholstery fabric.
• Weight Distribution: Distribute weight evenly across the daybed and trundle to prevent stress on the frame.

6. Troubleshooting

If you encounter any issues with your Antetek Daybed, please refer to the following common solutions:

• Squeaking Noises: Check all frame connections and tighten any loose bolts or screws. Ensure slats are properly seated.
• Trundle Not Sliding Smoothly: Inspect the trundle wheels for any obstructions or damage. Ensure the floor surface is clear.
• Missing Parts or Damaged Components: If you find any missing parts or damaged components upon arrival, please contact customer service immediately for assistance.

For further assistance, please contact Antetek customer support.

7. Specifications

8. Warranty and Support

Antetek stands behind the quality of its products. For specific warranty details regarding your daybed, please refer to the warranty information included in your product packaging or contact Antetek customer service directly.

If you have any questions, concerns, or require assistance with your product, please do not hesitate to contact our customer support team. We are committed to providing excellent service and ensuring your satisfaction.

Contact information for Antetek can typically be found on the product packaging, our official website, or through your purchase platform.