Kinchoix TK00061-3ST
Kinchoix 3 Step RV Stairs with Single Handrail User Manual
Model: TK00061-3ST
Introduction
Thank you for choosing the Kinchoix 3 Step RV Stairs with Single Handrail. This product is designed to provide a sturdy, safe, and portable solution for accessing RVs, campers, hot tubs, above-ground pools, and other elevated areas. Its robust carbon steel construction and anti-slip features ensure reliable performance and enhanced safety for users.
This manual provides essential information for the proper assembly, operation, and maintenance of your new stairs. Please read it thoroughly before use and retain it for future reference.
Safety Information
- Always ensure all components are securely fastened before use.
- Do not exceed the maximum load capacity of 300 pounds.
- Place the stairs on a stable, level surface to prevent wobbling or tipping.
- Regularly inspect the stairs for any signs of wear, damage, or loose connections. Discontinue use if damage is found.
- Keep children and pets away from the stairs during assembly and ensure proper supervision during use.
- The anti-slip tape is crucial for safety; ensure it is properly applied and maintained.
Package Contents
Please verify that all parts are present before beginning assembly. If any parts are missing or damaged, contact customer support.
- Stair Pedestal Frame (Base)
- Stair Panels (3 pieces)
- Support Beams/Braces (Triangular bars)
- Single Handrail Assembly (Multiple screw-threaded parts)
- Hardware Kit (Screws, nuts, washers, caps)
- Anti-slip Skid Tape (6.6 ft roll)
- Instruction Manual (This document)
Assembly Instructions
Follow these steps carefully to assemble your Kinchoix 3 Step RV Stairs. It is recommended to have a second person assist with assembly for easier handling of components.

Figure 1: Overview of Assembly Steps
- Step 1: Pedestal Installation
Begin by assembling the main pedestal frame. Ensure all vertical and horizontal supports are correctly oriented as shown in the diagram. Secure connections using the provided hardware.
(Refer to image section 1) - Step 2: Panel Mounting and Support Mounting (Lower Step)
Attach the lowest stair panel to the pedestal frame. Simultaneously, install the triangular support beams/braces for this step. These braces are crucial for stability and load-bearing capacity. Ensure all screws are tightened securely.
(Refer to image section 2) - Step 3: Panel Mounting and Support Mounting (Middle and Top Steps)
Proceed to attach the middle and top stair panels, following the same procedure as Step 2. Install the corresponding triangular support beams for each step. Verify that all panels are level and firmly attached.
(Refer to image section 3) - Step 4: Handrail Mounting
Assemble the single handrail by screwing its threaded parts together. Once assembled, attach the handrail to the designated mounting points on the stair frame. Ensure the handrail is upright, stable, and securely fastened. The handrail can be installed on either side of the stairs.
(Refer to image section 4) - Step 5: Apply Anti-Slip Skid Tape
The included 6.6 ft anti-slip tape can be cut to the desired length for each step. Clean the surface of each step thoroughly before application. Peel off the film cover and firmly press the tape onto the step plates. This enhances safety, especially in wet conditions.
(Refer to image showing anti-slip tape application)
Figure 2: Anti-Slip Skid Tape Application
After assembly, double-check all connections to ensure they are tight and secure. The stairs should feel solid and not wobble.
Operating Instructions
The Kinchoix 3 Step RV Stairs are designed for straightforward use. Follow these guidelines for optimal performance and safety:
- Placement: Position the stairs on a flat, stable, and non-slippery surface. Ensure there is no debris or obstacles underneath the stairs that could cause instability.
- Stability Check: Before stepping on the stairs, gently push and pull on them to confirm they are stable and do not rock or slide.
- Using the Handrail: Always use the handrail for support when ascending or descending, especially if you have mobility concerns or in adverse weather conditions.
- Weight Distribution: Distribute your weight evenly when using the stairs. Avoid sudden movements or jumping on the steps.
- Versatile Use: These stairs are suitable for RVs, campers, hot tubs, above-ground pools, and other elevated access points. Ensure the height aligns with your specific needs.

Figure 3: Wide Usage Scenarios
Maintenance
Proper maintenance will extend the life of your Kinchoix RV Stairs and ensure continued safety.
- Cleaning: Wipe down the carbon steel frame and step panels with a damp cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the finish. The polished black finish is relatively easy to clean.
- Inspection: Periodically check all bolts, screws, and connections for tightness. Re-tighten any loose fasteners.
- Anti-Slip Tape: Inspect the anti-slip tape for wear or peeling. If the tape loses its effectiveness, replace it to maintain optimal traction.
- Storage: If storing the stairs for an extended period, especially outdoors, consider covering them to protect against harsh weather conditions. The handrail can be disassembled into three parts for easier storage.
- Damage: If any structural components are bent, cracked, or severely damaged, do not attempt to repair them yourself. Contact customer support for guidance.
Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stairs wobble or feel unstable. | Loose fasteners; uneven ground; incorrect assembly of support beams. | Ensure all screws and bolts are tightened. Move stairs to a level surface. Verify triangular support beams are correctly installed. |
| Handrail feels loose. | Handrail sections not fully threaded; mounting screws loose. | Twist handrail sections firmly to ensure full engagement of threads. Tighten all screws securing the handrail to the frame. |
| Anti-slip tape peeling or not effective. | Surface not clean before application; tape worn out. | Clean and dry the step surface thoroughly before applying new tape. Replace worn tape with new anti-slip material. |
| Missing parts upon delivery. | Shipping damage or packing error. | Contact Kinchoix customer support immediately with your order details. |
Specifications

Figure 4: Product Dimensions
| Model Number | TK00061-3ST |
| Number of Steps | 3 |
| Material | Carbon Steel |
| Color | Black |
| Product Dimensions (Overall) | 27" (W) x 34" (H) |
| Top Platform Dimensions | 27" x 16" |
| Stair Dimensions (Each) | 9.5" x 27" |
| Stair Rise Increments | 7" |
| Handrail Height (from platform) | 34" |
| Load Capacity | 300 Pounds |
| Item Weight | 32 pounds |
Warranty and Support
Kinchoix stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Kinchoix website. Keep your proof of purchase for any warranty claims.
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Kinchoix customer support:
- Website: Visit the Kinchoix Store on Amazon
- Email: Refer to product packaging or official website for contact email.
- Phone: Refer to product packaging or official website for contact phone number.
Please provide your product model number (TK00061-3ST) and purchase date when contacting support to expedite assistance.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.