1. Introduction
Thank you for choosing the SANOTO DG06 Bone Conduction Headphones. These open-ear Bluetooth headphones are designed to provide a unique audio experience by transmitting sound through your cheekbones, allowing you to remain aware of your surroundings. Featuring Bluetooth 5.3 for stable connectivity, IPX5 water resistance, and a comfortable, lightweight design, they are ideal for sports and daily use.
2. Package Contents
Please check the package for the following items:
- SANOTO DG06 Bone Conduction Headphones x 1
- USB-C Charging Cable x 1
- Earplugs x 2
- User Manual x 1
3. Product Overview
Familiarize yourself with the components of your SANOTO DG06 headphones.
Image 3.1: Front view of the SANOTO DG06 Bone Conduction Headphones, showcasing the overall design.
Image 3.2: Key features of the SANOTO DG06 headphones, including Bluetooth 5.3 connectivity, USB-C charging, CVC microphone noise reduction, and an 8-hour battery life.
4. Setup
4.1 Charging the Headphones
- Connect the provided USB-C charging cable to the charging port on the headphones.
- Connect the other end of the cable to a USB power adapter (not included) or a computer's USB port.
- The LED indicator will show the charging status. A full charge takes approximately 2 hours.
- Once fully charged, the LED indicator will typically turn off or change color.
4.2 Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the power button (usually the multi-function button) until the LED indicator flashes red and blue alternately, indicating pairing mode.
- On your device (smartphone, tablet, computer), enable Bluetooth and search for available devices.
- Select "SANOTO DG06" from the list of found devices.
- Once connected, the LED indicator will typically flash blue slowly or turn solid blue.
- The headphones will automatically reconnect to the last paired device when powered on, if the device's Bluetooth is active and within range.
5. Operating Instructions
The SANOTO DG06 headphones feature a multi-function button and volume buttons for easy control.
5.1 Power On/Off
- Power On: Press and hold the multi-function button for approximately 3 seconds.
- Power Off: Press and hold the multi-function button for approximately 5 seconds.
5.2 Music Playback
- Play/Pause: Press the multi-function button once.
- Next Track: Double-press the multi-function button.
- Previous Track: Triple-press the multi-function button.
5.3 Call Management
- Answer/End Call: Press the multi-function button once during an incoming call or an active call.
- Reject Call: Press and hold the multi-function button for 2 seconds during an incoming call.
5.4 Volume Control
- Volume Up: Press the '+' button once.
- Volume Down: Press the '-' button once.
5.5 Voice Assistant
- Activate Voice Assistant: Press and hold the multi-function button for 2 seconds (when not on a call).
6. Maintenance
6.1 Cleaning
- Wipe the headphones with a soft, dry cloth.
- For stubborn dirt, use a slightly damp cloth with mild soap, then wipe dry immediately.
- Do not use abrasive cleaners or solvents.
6.2 Storage
- Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on the headphones.
6.3 Water Resistance
The SANOTO DG06 headphones are IPX5 water-resistant, meaning they are protected against low-pressure water jets from any direction. This makes them suitable for workouts and light rain.
Important: IPX5 rating does not mean the headphones can be submerged in water or used for swimming. Water damage from submersion is not covered by warranty.7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones for at least 2 hours. |
| Cannot pair with device. | Headphones not in pairing mode; Bluetooth off on device; device too far. | Ensure headphones are in pairing mode (flashing red/blue). Turn on Bluetooth on your device. Move device closer to headphones (within 15 meters). Forget previous pairings on your device and try again. |
| No sound or low volume. | Volume too low; headphones not connected; audio source issue. | Increase volume on both headphones and connected device. Ensure headphones are properly paired. Check audio source playback. |
| Sound quality is poor. | Interference; device too far; low battery. | Move away from sources of interference. Ensure device is within range. Charge headphones. |
8. Specifications
| Model Number | DG06 |
| Brand | SANOTO |
| Connectivity Technology | Bluetooth 5.3 (Wireless) |
| Water Resistance Rating | IPX5 (Sweat and splash resistant) |
| Battery Life | Up to 8-10 hours (Music/Talk) |
| Charging Time | Approximately 2 hours |
| Weight | 20 Grams |
| Control Method | Tactile (Multi-function button) |
| Microphone Technology | Omnidirectional (with CVC Noise Reduction) |
| Impedance | 14.2 Ohms |
| Compatible Devices | Computers, Game Consoles, Car Audio Systems, Tablets, Mobile Phones |
| Ear Placement | Open Ear |
| Form Factor | Bone Conduction |
9. Warranty and Support
For warranty information and customer support, please refer to the documentation provided with your purchase or contact the retailer where you purchased the SANOTO DG06 headphones. You may also visit the official SANOTO website for further assistance.
Manufacturer: SANOTO
