HOUAGI 63-inch LED TV Stand (Black)

Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your HOUAGI 63-inch LED TV Stand. Designed for televisions up to 65 inches, this modern entertainment center features built-in LED lighting, storage drawers, and glass shelves. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Information

• Do not load more than 200 pounds on the TV stand. Exceeding this weight limit may cause structural failure and injury.
• Secure the TV stand to the wall using appropriate anti-tip hardware (not included) to prevent tip-over risks, especially in households with children or pets.
• Exercise caution when handling the glass shelf to avoid breakage and potential injury. Ensure it is securely installed before placing items on it.
• Keep all electrical components, including LED lights and power cords, away from water and moisture.
• Ensure all screws and fasteners are tightened securely during assembly. Periodically check and re-tighten as necessary.

Package Contents

Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Top Panel
• Bottom Panel
• Side Panels (2)
• Middle Support Panels (2)
• Drawer Panels (front, back, sides, bottom)
• Drawer Slides (4 sets)
• Glass Shelves (2)
• LED Light Strip with Remote Control
• Hardware Pack (screws, dowels, cam locks, etc.)
• Instruction Manual

Assembly Instructions

Assembly typically requires two people. Please follow the steps below carefully. A detailed assembly video is provided for visual guidance.

1. Unpacking and Preparation: Carefully unpack all components from the box. Lay out all parts on a clean, soft surface to prevent scratches. Identify all hardware using the provided list.
2. Assemble Base Panels: Attach the cam lock screws to the designated holes on the bottom panel. Secure the side panels to the bottom panel using cam locks.
3. Install Drawer Slides: Attach the drawer slides to the inner sides of the main frame and to the drawer side panels using the provided screws. Ensure they are aligned correctly for smooth operation.
4. Construct Drawers: Assemble the drawer boxes by connecting the front, back, and side panels. Slide the drawer bottom into the grooves and secure the back panel.
5. Attach Middle Supports: Fasten the middle support panels to the main frame, creating compartments for the drawers and open shelving.
6. Install Top Panel: Carefully place the top panel onto the assembled frame, aligning the cam lock screws with the cam lock receivers. Tighten all cam locks to secure the top panel.
7. Insert Glass Shelves: Place the glass shelves into the designated slots within the open compartments. Ensure they are stable and level.
8. LED Light Installation: Adhere the LED light strip to the underside of the top panel or within the open compartments as desired. Connect the LED strip to the control box and power adapter.
9. Final Checks: Ensure all connections are tight and the stand is stable. Place the TV stand in its desired location.

Image: The HOUAGI LED TV Stand in a living room setting, showcasing its modern design and customizable LED lighting.

Image: Detailed dimensions of the TV stand, indicating its suitability for TVs up to 70 inches.

Image: View of the storage features, including two 18.9-inch wide drawers and tempered glass shelves.

Image: Illustration of the new wire connector for the LED lights, designed for a more secure connection.

Operating Instructions (LED Lights)

Your HOUAGI LED TV Stand features built-in LED lights with customizable settings.

• Power On/Off: Use the provided remote control to turn the LED lights on or off.
• Color Selection: The remote allows you to choose from 16 different light colors. Press the corresponding color buttons to change the ambiance.
• Brightness Adjustment: Adjust the brightness of the LED lights using the designated buttons on the remote control.
• Light Modes: Select from 4 different light changing modes (e.g., flash, strobe, fade, smooth) to create dynamic lighting effects.

Maintenance

To ensure the longevity and appearance of your TV stand, follow these maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish. For glass surfaces, use a glass cleaner.
• Dusting: Regularly dust the stand with a dry, soft cloth.
• Hardware Check: Periodically inspect all screws and fasteners to ensure they remain tight. Re-tighten if necessary to maintain stability.
• LED Lights: If LED lights stop working, check the power connection and remote control battery. If issues persist, contact customer support.

Troubleshooting

If you encounter any issues with your HOUAGI LED TV Stand, refer to the following common problems and solutions:

Specifications

• Brand: HOUAGI
• Model: LED TV Stand
• Color: Black
• Size: 63 inches (Length)
• Dimensions (L x W x H): Approximately 62.99 x 13.77 x 17.75 inches
• Material: Acacia Wood (as per product specifications)
• Item Weight: 51 pounds
• Maximum Weight Capacity: 200 pounds
• LED Lights: 16 colors, 4 modes, remote control operated
• Storage: 2 drawers, open shelving, 2 glass shelves

Warranty and Support

HOUAGI is committed to providing high-quality products and the best shopping experience. If you encounter any damage, missing parts, or other issues with your LED TV stand, please contact our customer support team. We are always here to assist you and will provide the best possible solution.

For support, please refer to your purchase documentation or the seller's contact information.