1. Introduction
The Marada Sim Monitor Stand 37-MS is designed to integrate with the Marada Racing Cockpit 37, providing a stable and adjustable mounting solution for your display. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your monitor stand.
2. Product Features
- Compatibility: Specifically designed as a proprietary part for the Marada Racing Cockpit 37.
- Display Support: Accommodates PC and TV monitors ranging from 32 to 55 inches. Recommended sizes are 27 and 32 inches for optimal experience.
- VESA Standard: Supports a wide range of VESA bolt mounting patterns, including: 75x75mm, 100x100mm, 150x150mm, 200x100mm, 200x150mm, 200x200mm, 300x100mm, 300x200mm, 300x300mm, 400x200mm, and 400x400mm.
- Adjustability: Offers adjustable TV position and height to achieve the optimal viewing angle and ergonomic setup.
- Material Structure: Constructed from robust carbon steel tubing for enhanced rigidity and durability. Vertical poles measure 1"x1", horizontal poles measure 1.6"x1", and wall thickness is 1.5mm.
Image: Marada Sim Monitor Stand integrated with a racing cockpit, providing a stable display setup.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present in your package:
- Vertical Support Poles (2)
- Horizontal VESA Mounting Bars (2)
- Flange Connectors (4)
- Various Bolts, Nuts, and Washers
- Wrenches and Allen Keys for assembly
Image: All components included in the Marada Sim Monitor Stand package.
4. Assembly Instructions
Follow these steps carefully to assemble your Marada Sim Monitor Stand:
- Verify Cockpit Compatibility: Ensure your racing cockpit features square tube brackets with dimensions of 25mm x 25mm for proper integration.
- Insert Vertical Poles: Insert the vertical support poles of the monitor stand into the designated slots on your racing wheel bracket.
- Align Flanges: Align and overlap the four-hole flanges on the monitor stand with the corresponding points on the cockpit frame.
- Secure with Bolts: Use the provided bolts, nuts, and washers to securely fasten the flanges. Ensure all connections are tight to prevent wobbling.
- Install Horizontal VESA Bars: Attach the horizontal VESA mounting bars to the vertical support poles at your desired height. These bars have multiple holes for height adjustment.
- Mount Display: Secure your monitor or TV to the VESA mounting bars using the appropriate screws for your display's VESA pattern. Ensure the display is centered and level.
Image: Visual guide for the installation steps of the monitor stand.
Image: Product details showing the alloy steel construction and flange link for stability.
5. Operating Instructions (Adjustments)
The Marada Sim Monitor Stand allows for flexible adjustments to optimize your viewing experience:
- Height Adjustment: To adjust the monitor height, loosen the bolts securing the horizontal VESA mounting bars to the vertical poles. Slide the bars up or down to the desired position, then re-tighten all bolts firmly.
- VESA Plate Adjustment: The VESA mounting plates on the horizontal bars can be adjusted horizontally to accommodate different monitor widths and VESA patterns. Loosen the screws, slide the plates, and re-tighten.
Image: Overview of adjustable features for optimal TV position.
Image: Supported VESA sizes and horizontal adjustment for monitors.
6. Maintenance
To ensure the longevity and safe operation of your monitor stand, perform the following maintenance tasks:
- Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Re-tighten any loose fasteners to maintain stability.
- Cleaning: Wipe down the stand with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners or solvents that could damage the finish.
- Damage Check: Inspect the carbon steel tubing for any signs of damage, bends, or corrosion. If significant damage is found, discontinue use and contact support.
7. Troubleshooting
- Monitor is not stable or wobbles:
- Ensure all assembly bolts, especially those connecting the stand to the cockpit and the VESA bars to the vertical poles, are securely tightened.
- Verify that your monitor's weight and size are within the supported specifications (32-55 inches).
- Difficulty adjusting monitor height:
- Loosen the adjustment bolts sufficiently before attempting to slide the VESA bars.
- Ensure no cables are snagged or obstructing the movement.
- Monitor does not fit VESA mounting pattern:
- Confirm your monitor's VESA pattern matches one of the supported patterns listed in Section 2.
- Ensure you are using the correct screws and spacers for your monitor.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 37-MS |
| Product Dimensions | 23.5 x 19.7 x 51.5 inches |
| Item Weight | 10.12 pounds |
| Material | Carbon Steel Tube |
| Vertical Pole Size | 1" x 1" |
| Horizontal Pole Size | 1.6" x 1" |
| Wall Thickness | 1.5mm |
| Supported Monitor Sizes | 32 to 55 inches (Recommended 27", 32") |
| VESA Compatibility | 75x75mm, 100x100mm, 150x150mm, 200x100mm, 200x150mm, 200x200mm, 300x100mm, 300x200mm, 300x300mm, 400x200mm, 400x400mm |
| Compatible Cockpit | Marada Racing Cockpit 37 |
Image: Product dimensions and measurements.
9. Warranty and Support
Marada products are manufactured to high-quality standards. For any questions, technical assistance, or warranty claims, please contact Marada customer support through the retailer where the product was purchased or visit the official Marada website. Please retain your proof of purchase for warranty validation.
