Important Safety Information
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- Anti-Tip Kit: Always secure the product to the wall using the included anti-tip kit to prevent tipping and potential injury.
- Load Capacity: Do not exceed the maximum static load capacity of 6.6 lb (3 kg) per drawer and 33 lb (15 kg) for the tabletop. The maximum total static load capacity is 79.2 lb (36 kg). Overweight items can cause damage or instability.
- Drawer Usage: Ensure all drawers are fully closed when not in use to prevent accidental tipping or bumps. Do not leave drawers fully or slightly open.
- Cleaning: Do not wash the fabric drawers. Clean with a wet cloth. For the tabletop and metal frame, wipe with a dry cloth.
- Ventilation: Upon first opening the package, a "new" smell may be present. Air the product out in a well-ventilated area for a few hours.
- Intended Use: This storage cabinet is designed for organizing personal belongings. Do not store clothes in the fabric drawers if they are heavy or damp, as this may affect drawer integrity over time.
Figure 1: Illustration of the anti-tip kit securing the cabinet to the wall and adjustable feet for leveling on uneven floors.
Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged.
- 1 x Storage Cabinet Frame (Metal Frame, Particleboard Tabletop)
- 7 x Fabric Drawers (4 large, 3 small)
- 1 x Anti-Tip Kit
- 1 x Accessory Kit (includes screws, Allen key, and other necessary hardware)
- 1 x Instructions Manual (this document)
Setup and Assembly Instructions
Assembly is required. Follow the step-by-step instructions provided in the included accessory kit. All parts are labeled, and an Allen key is supplied for convenience.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Frame: Follow the diagrams in the accessory kit to connect the metal frame components using the provided screws and Allen key. Ensure all connections are secure.
- Attach Tabletop: Secure the particleboard tabletop to the assembled metal frame.
- Insert Drawers: Fold and assemble the fabric drawers according to their individual instructions. Insert the assembled drawers into their designated slots in the frame.
- Install Anti-Tip Kit: This is a critical safety step. Position the cabinet in its desired location. Using the anti-tip kit, secure the cabinet to a wall stud or appropriate anchor point. Refer to Figure 1 for guidance.
- Adjust Feet: The cabinet features adjustable feet. Level the cabinet by rotating the feet until it stands stable on uneven floors.
Figure 2: The fully assembled SONGMICS storage cabinet, ready for use.
Operating Instructions
This storage cabinet is designed for efficient organization of various items.
- Drawer Usage: The cabinet features 7 fabric drawers (3 small, 4 large) for sorting and storing items. Pull the practical handles to open and push to close. Always ensure drawers are fully closed when not actively accessing contents.
- Tabletop Functionality: The oak tabletop provides additional surface space for decorative items, lamps, or frequently accessed belongings. The side rails and raised back edge help prevent items from falling off.
Figure 3: Examples of how to organize items within the spacious fabric drawers.
Figure 4: Details of the top shelf with protective rails and the design of the durable fabric drawers with handles.
Maintenance
Proper care will extend the life and appearance of your storage cabinet.
- Cleaning Fabric Drawers: Do not machine wash or submerge the fabric drawers in water. Spot clean with a damp cloth and mild detergent if necessary. Allow to air dry completely before reinserting into the cabinet.
- Cleaning Frame and Tabletop: Wipe the metal frame and particleboard tabletop with a dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Avoid Overloading: Adhere to the specified load capacities to prevent damage to the drawers and frame.
Troubleshooting
If you encounter issues with your storage cabinet, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cabinet feels unstable or wobbly. | Uneven floor; loose connections; anti-tip kit not installed. | Adjust the leveling feet at the bottom of the cabinet. Ensure all assembly screws are tightened. Install the anti-tip kit securely to the wall. |
| Drawers do not slide smoothly or appear misaligned. | Drawer not assembled correctly; frame not level; drawer overloaded. | Check drawer assembly. Ensure the cabinet is level using the adjustable feet. Reduce the weight of items in the drawer. |
| Strong "new" smell from the product. | Common with new furniture items. | Place the cabinet in a well-ventilated area for several hours or a few days to allow the smell to dissipate. |
| Drawers tip forward when opened. | Cabinet not secured to the wall; drawers overloaded; multiple drawers open simultaneously. | Ensure the anti-tip kit is properly installed. Do not overload drawers. Always close one drawer before opening another. |
Specifications
Detailed specifications for the SONGMICS ULTS523W57 Storage Cabinet.
| Feature | Detail |
|---|---|
| Model Number | ULTS523W57 |
| Overall Dimensions (D x W x H) | 11.2”D x 38.6”W x 33.5”H (28.5 x 98 x 85 cm) |
| Small Drawer Dimensions (D x W x H) | 10.8”D x 11.6”W x 8.5”H (27.5 x 29.5 x 21.5 cm) |
| Large Drawer Dimensions (D x W x H) | 10.8”D x 18.1”W x 8.5”H (27.5 x 46 x 21.5 cm) |
| Product Weight | 28.2 lb (12.8 kg) |
| Max. Static Load Capacity per Drawer | 6.6 lb (3 kg) |
| Max. Static Load Capacity of Tabletop | 33 lb (15 kg) |
| Max. Total Static Load Capacity | 79.2 lb (36 kg) |
| Materials | Polyester, Particleboard, Metal, Oxford Fabric, Non-Woven Fabric, Cardboard |
| Color | White, Oak |
| Assembly Required | Yes |
Figure 5: Dimensional overview and maximum load capacity of the storage cabinet.
Figure 6: Illustration of the thickened metal tubes contributing to the cabinet's stability and load capacity.
Warranty and Support
For warranty information, replacement parts, or technical assistance, please contact SONGMICS customer support. Refer to the contact details provided on the product packaging or the official SONGMICS website.
Please have your model number (ULTS523W57) and purchase date available when contacting support.
