HOMCOM 6 Panel Room Divider Instruction Manual

1. Introduction

Thank you for choosing the HOMCOM 6 Panel Room Divider. This freestanding partition is designed to provide privacy and divide spaces within your home. Its woven design and foldable structure offer both functionality and aesthetic appeal. Please read this manual carefully before use to ensure proper handling and longevity of your product.

2. Safety Information

CALIFORNIA PROPOSITION 65 WARNING: This product can expose you to chemicals including [list of chemicals], which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

• Ensure the room divider is placed on a flat, stable surface to prevent tipping.
• Keep away from open flames or heat sources.
• This product is intended for indoor use only.
• Do not allow children to climb on or play with the room divider.

3. Package Contents

The HOMCOM 6 Panel Room Divider is shipped fully assembled. No additional parts or tools are required for initial setup.

4. Setup

This room divider requires no assembly. Simply remove it from its packaging and follow these steps for initial placement:

1. Carefully remove all packaging materials.
2. Place the folded room divider in your desired location.
3. Gently unfold the panels to create the desired configuration. The hinges allow for flexible arrangement.
4. Ensure the divider is stable and balanced before leaving it unattended. Adjust the panel angles as needed for optimal stability.

5. Operating Instructions

The HOMCOM 6 Panel Room Divider is designed for ease of use and flexibility.

5.1 Unfolding and Positioning

• The panels are connected by sturdy metal hinges, allowing them to fold in both directions.
• To extend the divider, gently pull the panels apart until they form the desired length and angle.
• For maximum stability, arrange the panels in a zig-zag or accordion pattern rather than a straight line.

5.2 Folding and Storage

When not in use, the room divider can be easily folded for compact storage.

• Gently push the panels together, allowing them to fold along the hinges.
• Once fully folded, the divider forms a compact unit that can be stored in a corner or closet.

6. Maintenance

To keep your HOMCOM Room Divider in optimal condition, follow these simple maintenance guidelines:

• Cleaning: Wipe the surfaces with a dry, soft cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish or woven material.
• Inspection: Periodically check the metal hinges for any signs of wear or looseness. Ensure the wood frame and woven panels are intact.
• Storage: When storing, ensure the divider is in a dry place, away from direct sunlight or extreme temperatures, to prevent material degradation.

7. Troubleshooting

• Divider feels unstable: Ensure the panels are arranged in a zig-zag or accordion shape. Avoid extending them in a completely straight line, as this reduces stability. Check that the divider is on a level surface.
• Hinges are stiff: Apply a small amount of silicone-based lubricant to the hinges if they become stiff over time.
• Woven material damage: Small tears in the paper rope can sometimes be repaired with a strong adhesive. For significant damage, contact customer support.

8. Specifications

9. Warranty and Support

For warranty information or customer support regarding your HOMCOM 6 Panel Room Divider, please refer to the purchase documentation or contact the retailer where the product was purchased. You may also visit the official HOMCOM website for further assistance.