Introduction
The Gabba Goods Platinum Vibe Wireless Over-Ear Bluetooth Headphones are designed to provide a high-quality audio experience with versatile connectivity options. Featuring noise reduction technology, a built-in microphone, and support for Bluetooth, wired, and Micro SD card playback, these headphones are suitable for various activities including travel, work, gaming, and music listening.
What's in the Box
- Gabba Goods Platinum Vibe Wireless Over-Ear Bluetooth Headphones
- USB Charging Cable
- 3.5mm AUX Audio Cable
Product Overview
The Platinum Vibe headphones feature a comfortable over-ear design with cushioned ear muffs for extended wear. The headset is foldable for easy storage and portability. Controls for volume, power, and playback are conveniently located on the earcup. It also includes ports for charging, AUX input, and a Micro SD card slot.

Image: Detailed view of the headphone's control buttons and ports, including Micro SD card slot, AUX input, USB charging port, volume controls, and power button.
Setup
1. Powering On/Off
- To Power On: Press and hold the Power On/Off button located on the earcup until the indicator light illuminates.
- To Power Off: Press and hold the Power On/Off button until the indicator light turns off.
2. Bluetooth Pairing
- Ensure the headphones are powered off.
- Press and hold the Power On/Off button for approximately 3-5 seconds until the indicator light flashes red and blue, indicating pairing mode.
- On your device (smartphone, tablet, laptop, etc.), enable Bluetooth and search for available devices.
- Select "Platinum Vibe" from the list of available devices.
- Once connected, the indicator light will turn solid blue.
3. Wired Connection (AUX)
For devices without Bluetooth or when battery is low, use the included 3.5mm AUX audio cable.
- Plug one end of the 3.5mm AUX cable into the AUX IN port on the headphone earcup.
- Plug the other end into the 3.5mm audio jack of your device.
- The headphones will automatically switch to wired mode. Note that controls on the headphones may be limited in wired mode, and playback will be controlled by your connected device.
Operating Instructions
1. Basic Controls
- Play/Pause: Press the Power On/Off button once.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
2. Phone Calls
With the built-in microphone, you can manage calls hands-free when connected via Bluetooth.
- Answer Call: Press the Power On/Off button once.
- End Call: Press the Power On/Off button once during a call.
- Reject Call: Press and hold the Power On/Off button for 2 seconds.
- Redial Last Number: Double-press the Power On/Off button.
3. Micro SD Card Playback
Insert a Micro SD card (not included) with your favorite music, audiobooks, or podcasts into the Micro SD card slot. The headphones will automatically switch to Micro SD playback mode.
Charging
To charge your Gabba Goods Platinum Vibe headphones:
- Connect the small end of the included USB charging cable to the Charging Port on the headphone earcup.
- Connect the large end of the USB cable to a USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light will turn red during charging and turn off when fully charged.
- A full charge provides up to 24 hours of battery life.
Maintenance
- Clean the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Avoid exposing the headphones to extreme temperatures, humidity, or direct sunlight.
- Store the headphones in a cool, dry place when not in use. The foldable design allows for compact storage.
- Keep away from water and liquids as the headphones are not water-resistant.
Troubleshooting
| Problem | Solution |
|---|---|
| Headphones do not power on. | Ensure the headphones are charged. Connect to a power source using the USB cable. |
| Cannot pair via Bluetooth. | Ensure headphones are in pairing mode (flashing red/blue light). Make sure Bluetooth is enabled on your device and it's within 10 meters of the headphones. Forget the device on your phone and try pairing again. |
| No sound in wired mode. | Check if the 3.5mm AUX cable is securely connected to both the headphones and your device. Ensure the volume on your device is turned up. |
| Poor sound quality. | Ensure the headphones are fully charged. If using Bluetooth, move closer to your device to avoid interference. If using AUX, check the cable for damage. |
| Microphone not working. | Ensure headphones are connected via Bluetooth. Check your device's audio input settings to confirm the headphone microphone is selected. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Platinum Vibe |
| Item Model Number | GG-VIBE |
| Connectivity Technology | Wireless (Bluetooth), Wired (3.5mm AUX) |
| Wireless Communication Technology | Bluetooth |
| Bluetooth Range | 10 Meters |
| Noise Control | Sound Isolation |
| Special Feature | HI-DEF STEREO |
| Built-in Microphone | Yes |
| Micro SD Card Support | Yes |
| Battery Life | Up to 24 Hours |
| Charging Port | USB-C |
| Ear Placement | Over Ear |
| Material | Plastic |
| Item Weight | 11.3 ounces |
Warranty & Support
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official Gabba Goods website. Keep your proof of purchase for warranty claims.