1. Introduction
This manual provides essential instructions for the proper installation and use of your LeYi 3-in-1 Full Body Shockproof Case for the Samsung Galaxy S10 (6.1 inch). This case is designed to offer robust protection against drops, scratches, and dust.
Important Compatibility Note: This case is specifically designed for the Samsung Galaxy S10 (6.1 inch) models SM-G973F, SM-G973U, SM-G973W, SM-G973U1, and SM-G9730. It is NOT compatible with Samsung Galaxy S10E, S10 Plus, or S10 Lite models.
Figure 1: Case Compatibility for Samsung Galaxy S10 (6.1")
2. Product Features
- 3-in-1 Full Body Protection: Composed of a solid PC inner shell, soft TPU shock-absorbing back shell, and a bumper for comprehensive device safeguarding.
- Shockproof and Anti-Scratch: Engineered to withstand scratches, bumps, and impacts, providing military-grade drop protection.
- Enhanced Screen and Camera Protection: Features raised lips around the screen and camera lens to prevent direct contact with surfaces, reducing daily wear. (Note: Screen protector not included.)
- Flexible Tactile Buttons & Precise Cutouts: Ensures easy access to all ports, cameras, speakers, microphones, and other phone functions with responsive button covers.
- Non-Slip Grip: The case's elegant curves and matte surface provide a secure and comfortable hold, minimizing accidental slips.
- Dust Cover: A dedicated dust cover for the USB charging port prevents dust, dirt, and grime from entering, maintaining device cleanliness.
Figure 2: Military Grade Drop Protection
3. Setup and Installation
The LeYi 3-in-1 case features a unique detachable design for installation. Please follow these steps carefully:
- Disassemble the Case: Gently separate the outer rubber layer from the inner hard PC case. Start from a corner and work your way around.
- Prepare Your Phone: Ensure your Samsung Galaxy S10 screen is clean and free of dust or debris.
- Install Phone into Inner Frame: Place your phone into the hard PC front frame, ensuring all cutouts align perfectly with your phone's ports and buttons.
- Attach Rear PC Frame: Snap the hard PC rear frame onto the phone, securing it with the front frame. Ensure all clips are fully engaged.
- Apply Outer Rubber Layer: Carefully fit the soft TPU rubber cover over the assembled hard case and phone. Ensure all edges are snug and the buttons are responsive.
- Check Dust Plug: Verify the charging port dust plug is properly seated when not in use.
Figure 3: Step-by-Step Installation Guide
4. Operating Instructions
- Button Functionality: The case is designed with flexible tactile buttons that maintain the original responsiveness of your phone's buttons. Press them as you normally would.
- Charging Port Dust Plug: To charge your device, gently open the dust plug covering the USB-C port. After charging, ensure the plug is securely re-inserted to prevent dust and debris entry.
5. Maintenance
To ensure the longevity and appearance of your LeYi phone case, follow these maintenance tips:
- Cleaning: Use a soft, damp cloth to wipe down the exterior of the case. Avoid harsh chemicals or abrasive cleaners, as these can damage the material.
- Regular Inspection: Periodically remove the case and inspect your phone and the case for any trapped dirt or debris that could cause scratches. Clean as necessary.
- Avoid Extreme Conditions: Do not expose the case to extreme temperatures or prolonged direct sunlight, which can degrade the material over time.
6. Troubleshooting
If you encounter any issues with your LeYi case, consider the following:
- Case Not Fitting Correctly: Double-check that your phone model is indeed the Samsung Galaxy S10 (6.1 inch) and not an S10E, S10 Plus, or S10 Lite. Ensure all three layers of the case are correctly aligned and snapped into place during installation.
- Buttons Unresponsive: Verify that the flexible button covers are properly seated over your phone's buttons. Re-install the case if necessary to ensure correct alignment.
- Fingerprint Recognition Issues: If you experience difficulty with fingerprint recognition, ensure the screen area is clean and free of air bubbles or dust. Some users may need to re-register their fingerprints after installing the case to optimize performance.
7. Specifications
- Product Dimensions: 0.51 x 3.94 x 7.09 inches
- Item Weight: 2.89 ounces
- Material: Polycarbonate, Thermoplastic Polyurethane (TPU)
- Special Features: 3-in-1 Full Body Upgrade Design, Charging Port Dust Plug, Dustproof, Durable & Protective, High-Grade TPU and PC Material, Rugged Defender Protection
- Compatible Phone Models: Samsung Galaxy S10 (6.1") - SM-G973F, SM-G973U, SM-G973W, SM-G973U1, SM-G9730
8. Warranty and Support
LeYi is committed to providing high-quality products. For any issues regarding unsuitable mobile phone models, product quality, or other concerns, please contact our customer service team through Amazon. We are available 24 hours a day to provide satisfactory service and solutions.
Please retain your proof of purchase for warranty claims.
