Elytsemoh Garage Screen Door User Manual

Introduction

The Elytsemoh Fiberglass Garage Screen Door is designed to provide a hands-free, magnetic closure solution for your garage, patio, or other large openings. It allows for fresh air circulation while keeping insects and debris out. Constructed from durable fiberglass, this screen is built for longevity and ease of use.

Safety Information

• Ensure the installation surface is clean and dry for optimal adhesive performance.
• Keep small children and pets away during installation to prevent accidental injury.
• When rolling up the screen, ensure it is securely fastened to prevent it from falling.
• If installing on an iron garage door, roll up the screen to prevent magnets from sticking to the iron door when closed and raised.
• Periodically check the adhesive and tacks for secure attachment.

Package Contents

• 1 x Elytsemoh Fiberglass Garage Screen Door (16.3 x 7.15 FT)
• 1 x Roll of Adhesive Velcro-like Tape (4 cm widened top tape)
• Heavy-duty Thumbtacks
• 6 x Integrated Roll-Up Straps
• 20 x Gravity Sticks (pre-installed)

Image: Key components for installation, including strapping tapes, Velcro roll, and thumbtacks.

Specifications

Image: Detailed dimensions and fitting guide for the 16x7FT garage screen door.

Image: Illustration highlighting the durable fiberglass fabric and its weight (2300g/5.1lb).

Image: Features contributing to wind resistance, including 38 magnetic points and 20 gravity sticks.

Setup and Installation

Follow these steps for easy installation of your garage screen door. It is recommended to have a second person for assistance, especially during the initial hanging of the screen.

Step 1: Prepare the Door Frame

Clean the entire door frame thoroughly. Use a damp cloth to remove any dust, dirt, or grease. Allow the cleaned areas to dry completely for a few minutes before proceeding. A clean surface ensures optimal adhesion of the Velcro tape.

Step 2: Apply Velcro Tape

Measure and mark the exact location where the adhesive Velcro tape will be applied on your garage door frame. Carefully peel the backing from the Velcro tape and firmly press it along the marked perimeter of the door frame. Ensure the tape is straight and smooth, with no bubbles or wrinkles.

Step 3: Attach the Screen

Align the top of the garage screen door with the top of the installed Velcro tape on the door frame. Press the screen's Velcro edge firmly onto the tape, working your way down both sides. It is crucial to leave a 0.5-0.8 inch margin at the bottom of the screen to allow the magnetic closure to close naturally and effectively.

Step 4: Secure with Thumbtacks

For added security and durability, especially in areas with high wind or frequent use, use the provided heavy-duty thumbtacks to reinforce the Velcro tape along the door frame. Place thumbtacks at regular intervals, particularly at the top corners and along the sides, to ensure the screen remains firmly in place.

Image: The Elytsemoh garage screen door fully installed on a two-car garage.

Image: Garage screen door installed, allowing vehicles to pass through.

Operating Instructions

Hands-Free Entry and Exit

The screen features a magnetic closure system that allows for hands-free entry and exit. Simply walk through the center opening, and the 38 strong magnetic points will automatically snap back together, ensuring the screen closes instantly behind you. This is ideal for when your hands are full or for allowing pets to pass through easily.

Using Roll-Up Straps

For times when you need the screen to remain open, such as when driving a vehicle in or out, utilize the 6 integrated roll-up straps. Roll the screen neatly upwards and secure it with the straps. This keeps the screen out of the way and prevents the magnets from interfering with an iron garage door when it is closed and raised.

Image: Demonstrating how to roll up and store the screen door when not in use.

Maintenance

• Cleaning: To clean the screen, gently wipe it down with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners that could damage the fiberglass material.
• Inspection: Periodically inspect the screen for any signs of wear, tear, or damage to the mesh or magnetic strips. Check the Velcro adhesion and thumbtacks for secure attachment.
• Storage: During off-seasons or when not in use for extended periods (e.g., winter), it is recommended to remove the screen, clean it, and store it in a dry, protected area to prolong its lifespan. Roll it up neatly using the integrated straps.

Image: Properties of the durable fiberglass mesh material.

Troubleshooting

• Screen not closing properly:
  • Ensure the screen is installed with the recommended 0.5-0.8 inch margin at the bottom.
  • Check if any debris is obstructing the magnetic strips.
  • Verify that the magnetic strips are aligned correctly.
• Screen detaching from frame:
  • Re-press the Velcro tape firmly onto the door frame.
  • Add more thumbtacks, especially in high-stress areas or if the surface is uneven.
  • Ensure the door frame was clean and dry before initial installation.
• Magnets sticking to iron garage door:
  • Always roll up the screen using the integrated straps when the garage door is closed and raised to prevent the magnets from adhering to the metal door.

Warranty and Support

Elytsemoh offers a 30-day money-back guarantee and a 12-month quality guarantee for this product. Should you have any questions or require technical support before or after your purchase, please contact us directly.

How to contact us:

1. Log in to your Amazon Account.
2. Select "Your Orders".
3. Find your order number for the Elytsemoh Garage Screen Door.
4. Click "Contact Seller".