Signature Design by Ashley Shullden Dining Chair Instruction Manual

1. Product Overview

The Signature Design by Ashley Shullden Dining Chair offers a blend of casual elegance and modern design, suitable for various dining spaces. This set includes two chairs, featuring a distinctive spindle back and comfortable cushioned seats.

Image 1.1: Front view of two Shullden dining chairs, showcasing their gray finish and design.

Key Features:

• Design: Casual style with a spindle back and a modern gray finish.
• Construction: Made with durable hardwood solids.
• Comfort: Foam-cushioned seat upholstered in polyester fabric.
• Dimensions: Each chair measures approximately 19" W x 22.75" D x 38.25" H.

2. Safety Information

Please read and understand all safety information before assembly and use. Failure to follow these instructions may result in injury or damage to the product.

• Maximum Weight Capacity: Each chair is designed to support a maximum weight of 250 pounds (113 kg). Do not exceed this limit.
• Assembly: Assembly is required. Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware as needed.
• Stability: Do not stand on the chair. Avoid leaning back excessively or using the chair on uneven surfaces to prevent tipping.
• Children: Keep small parts and hardware away from children during assembly.

3. Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Chair Back (2)
• Chair Seat with Upholstery (2)
• Front Legs (2 pairs)
• Rear Legs (2 pairs)
• Hardware Pack (bolts, washers, Allen wrench)

4. Assembly Instructions

Assembly requires two people for optimal ease and safety. Follow these steps carefully.

Image 4.1: Visual reminder that assembly is necessary for the chairs.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify all parts against the package contents list.
2. Attach Front Legs to Seat: Align the front legs with the designated holes on the underside of the chair seat. Secure them using the provided bolts and washers. Do not fully tighten yet.
3. Attach Rear Legs to Seat: Similarly, align the rear legs with the corresponding holes on the underside of the chair seat. Secure with bolts and washers, but do not fully tighten.
4. Attach Backrest: Connect the chair backrest to the assembled seat and legs. Ensure all alignment points are correct. Secure with the remaining bolts and washers.
5. Final Tightening: Once all components are loosely assembled, place the chair on a flat surface. Apply gentle downward pressure to ensure all legs are level. Then, systematically tighten all bolts using the Allen wrench until secure. Do not overtighten.

Image 4.2: Detailed view of the chair's construction materials.

5. Operating and Usage

These chairs are designed for indoor dining and general seating purposes.

• Intended Use: Use the chair for sitting at a dining table, desk, or as accent seating.
• Weight Distribution: Distribute weight evenly on the seat. Avoid placing heavy objects on the backrest or arms (as this is an armless chair).
• Floor Protection: Consider using felt pads on the bottom of the chair legs to protect flooring surfaces, especially hardwood.

Image 5.1: Shullden dining chair in a typical dining room setup.

6. Maintenance and Care

Proper care will help maintain the appearance and longevity of your dining chairs.

• Cleaning: For the upholstered seat, spot clean only. Use a mild, water-free solvent or dry cleaning product. Do not saturate the fabric.
• Wood Frame: Wipe the wood frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Regular Checks: Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as necessary.
• Sunlight Exposure: Avoid prolonged exposure to direct sunlight to prevent fading of the fabric and wood finish.

Image 6.1: Close-up of the chair's seat and backrest for detail reference.

7. Troubleshooting

Here are solutions to common issues you might encounter:

• Uneven Legs/Wobbling: If the chair wobbles after assembly, ensure all bolts are evenly tightened. The front legs are equipped with adjustable feet; gently unscrew them slightly to level the chair on uneven floors.
• Loose Connections: If the chair feels loose, re-tighten all assembly bolts. Avoid overtightening, which can strip threads.
• Squeaking: Squeaking often indicates loose connections. Disassemble and reassemble the affected joint, ensuring all parts are correctly aligned and tightened.

8. Specifications

Image 8.1: Detailed dimensions of the Shullden dining chair.

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Signature Design by Ashley website. You may also contact their customer service directly for assistance with parts, assembly, or product inquiries.

Online Resources: www.ashleyfurniture.com