1. Introduction
This manual provides detailed instructions for the operation and maintenance of your RORIOS Unisex Digital Quartz Watch, Model AA-YM008. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your watch.
2. Product Overview
2.1 Key Features
- Multifunction Sport Watch: Calendar Day and Date, Alarm, Shock Resistant, Stopwatch.
- Luminous functions for visibility in low light conditions.
- 50 Meter Water Resistance.
- Dual display: Analog and Digital.
- Durable rubber band with stainless steel buckle.
- Scratch-resistant high transparency Acrylic mirror.
2.2 Components
Your RORIOS watch package includes:
- 1x RORIOS Watch
- 1x User Manual & Warranty
- 1x Beautiful Gift Watch Leather Box
- 1x RORIOS Watch Link Remover (if applicable for strap type)
Image 2.1: Overview of watch functions and button labels. This diagram illustrates the 'Reset Button', 'Light Button', 'Time', 'Mode Switching', 'Adjusting Time / Date, Timing', 'Display Seconds', and 'Date/Week' indicators on the watch face.
3. Setup
3.1 Initial Inspection
Upon unboxing, inspect the watch for any visible damage. Remove any protective films from the watch face and case back.
3.2 Adjusting the Strap
The rubber strap is designed for a comfortable fit. If necessary, use the included link remover (if provided) to adjust the strap length for optimal comfort. Ensure the buckle is securely fastened.
4. Operating Instructions
4.1 Button Functions
Refer to Image 2.1 for button locations.
- Reset Button: Used to reset stopwatch or adjust settings.
- Light Button: Activates the backlight for the digital display.
- Mode Switching Button: Cycles through different modes (Time, Alarm, Stopwatch).
- Adjusting Time/Date, Timing Button: Used to set time/date or start/stop stopwatch.
4.2 Setting Time and Date
- In normal time display mode, press the Mode Switching Button repeatedly until the time setting mode is activated (usually indicated by flashing digits).
- Use the Reset Button to select the digit you wish to adjust (e.g., hours, minutes, year, month, day).
- Use the Adjusting Time/Date Button to change the value of the selected digit.
- Once all settings are correct, press the Mode Switching Button again to exit the setting mode.
4.3 Using the Alarm
- Press the Mode Switching Button to enter the Alarm mode.
- Use the Reset Button to select the hour or minute digit.
- Use the Adjusting Time/Date Button to set the desired alarm time.
- Press the Mode Switching Button to confirm and exit.
- To turn the alarm on/off, typically a short press of the Adjusting Time/Date Button in Alarm mode will toggle it.
4.4 Using the Stopwatch
- Press the Mode Switching Button to enter the Stopwatch mode.
- Press the Adjusting Time/Date Button to start the stopwatch.
- Press the Adjusting Time/Date Button again to pause/resume.
- Press the Reset Button to reset the stopwatch to zero.
4.5 Luminous Function
The watch features a practical luminous function for visibility in low light. Press the Light Button to illuminate the digital display. The watch absorbs light and provides continuous illumination, making it visible at night.
Image 4.1: The watch display demonstrating its luminous function, with bright green digits visible in a dark environment.
4.6 Water Resistance
This watch is rated for 50 meters (5 ATM) water resistance. This means it is suitable for everyday use, such as hand washing, splashes, and brief immersion in water. It is not suitable for swimming, diving, or showering with hot water, as steam and pressure changes can compromise the seals.
5. Maintenance
5.1 Cleaning
Wipe the watch case and strap regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or abrasive materials.
5.2 Battery Replacement
When the digital display becomes dim or the watch stops functioning, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.
5.3 Storage
When not in use, store your watch in a cool, dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not functioning / Display blank | Low or dead battery. | Replace the battery. |
| Incorrect time/date | Time/date not set correctly. | Refer to Section 4.2 to reset time and date. |
| Water inside watch | Water resistance compromised (e.g., crown pulled out underwater, exposure to hot water/steam). | Immediately take the watch to a professional for inspection and repair. Avoid further water exposure. |
| Buttons not responding | Stuck button, low battery, or internal malfunction. | Ensure buttons are not jammed. If issue persists, consult support. |
7. Specifications
Image 7.1: Visual representation of the watch's key dimensions.
| Specification | Value |
|---|---|
| Model Number | AA-YM008 |
| Case Diameter | 39 Millimeters |
| Case Thickness | 15 Millimeters |
| Band Width | 16-18 Millimeters |
| Band Length | 260 Millimeters |
| Item Weight | 40 g (0.04 Kilograms) |
| Movement Type | Japanese Quartz |
| Display Type | Analog-Digital |
| Water Resistance Depth | 50 Meters |
| Band Material | Rubber |
| Case Material | Stainless Steel |
| Crystal Material | Mineral |
8. Warranty and Support
8.1 Warranty Information
If this product is sold by Amazon, please review the manufacturer’s website for warranty information. If this product is sold by another party, please contact the seller directly for warranty information for this product. You may also be able to find warranty information on the manufacturer’s website.
8.2 Customer Support
For any questions or issues not covered in this manual, please contact RORIOS customer service or the retailer from whom you purchased the watch. Keep your purchase receipt and warranty card for reference.