1. Introduction
The INXNI X3 is an advanced daily disposable robot vacuum cleaner and mop designed to simplify your home cleaning routine. It combines powerful vacuuming with efficient mopping using disposable pads, ensuring a hygienic and hassle-free experience. Featuring LDS laser navigation, smart app control, and voice assistant compatibility, the X3 provides comprehensive and intelligent cleaning for various floor types.
Image 1.1: The INXNI X3 robot vacuum cleaner and mop, showcasing its sleek design and brand logo.
2. Product Overview
Key Features:
- Daily Disposable Mop Pads: Eliminates the need to wash dirty mop pads, offering a convenient and hygienic cleaning solution.
- Powerful Suction & Mopping: 2000Pa suction power combined with dual spiral mopping plates rotating at 150 RPM and applying 10N continuous downward pressure for thorough cleaning.
- Advanced LDS Laser Navigation: Creates accurate maps of your home for efficient cleaning paths, obstacle avoidance, and anti-drop protection.
- Smart Control: Compatible with the INXNI App for monitoring, scheduling, suction adjustment, and water outlet gear control. Supports voice control via Alexa.
- Long Runtime: Equipped with a 3200mAh Li-ion battery, providing up to 120 minutes of cleaning on a single charge. Automatically returns to the charging base.
- Large Dust Bin: 600ml capacity dust bin designed to store more debris, especially useful for pet owners.
- Low Noise Operation: Operates at a minimum decibel level of 58dB, ensuring minimal disturbance.
- Obstacle Surmounting: Capable of surmounting obstacles up to 2cm high.
Image 2.1: The INXNI X3 demonstrating its powerful mopping action with dual rotating pads and continuous downward pressure.
Image 2.2: The INXNI X3 actively sweeping and vacuuming debris from a hard floor, highlighting its 2000Pa suction power.
3. Setup
3.1 Unpacking and Placement
- Carefully remove all components from the packaging.
- Place the charging base against a wall in an open area, ensuring there are no obstacles within 1 meter to the sides and 1.5 meters in front.
- Connect the power adapter to the charging base and plug it into a wall outlet. Ensure the power cable is neatly tucked away to prevent entanglement.
3.2 Initial Charging
- Place the INXNI X3 onto the charging base. Ensure the charging contacts on the robot align with those on the base.
- Allow the robot to fully charge before its first use. The indicator light on the robot will change to indicate a full charge.
3.3 App Connection
- Download the INXNI App from your mobile device's app store (iOS or Android).
- Open the app and follow the on-screen instructions to create an account and add your INXNI X3 device.
- Ensure your Wi-Fi network is 2.4GHz for successful connection.
Image 3.1: A smartphone displaying the INXNI app interface, showing options for mapping, cleaning area selection, suction adjustment, and mop humidity adjustment.
3.4 Voice Assistant Integration (Alexa)
- Open the Alexa app on your mobile device.
- Search for the "INXNI" skill and enable it.
- Link your INXNI account with your Alexa account.
- You can now control your INXNI X3 using voice commands, e.g., "Alexa, ask INXNI to start cleaning."
Image 3.2: A family interacting with the INXNI X3 using voice commands, demonstrating its compatibility with Alexa for convenient cleaning.
4. Operating Instructions
4.1 Starting and Stopping Cleaning
- Manual Start/Stop: Press the power button on the robot to start or pause cleaning.
- App Control: Use the INXNI App to initiate, pause, or stop cleaning cycles.
- Voice Control: Use compatible voice assistants (e.g., Alexa) to start or stop cleaning.
4.2 Cleaning Modes
- Sweep/Vacuum Mode: Ideal for general dust and debris removal. The 600ml dust bin is used in this mode.
- Mopping Mode: For wet cleaning hard floors. Attach disposable mop pads and fill the water tank. Features 3-gear electrical water tank control for consistent humidity.
- Sweep/Vacuum/Mop All-in-One: Simultaneously vacuums and mops for comprehensive cleaning.
Image 4.1: The INXNI X3 mopping a floor, illustrating its 3-speed electric control water tank for consistent humidity and effective stain removal.
4.3 Customizing Cleaning
- Mapping: The LDS laser navigation system creates a detailed map of your home. View and manage this map in the INXNI App.
- Restricted Zones: Use the app to define areas the robot should avoid (e.g., carpets during mopping, delicate furniture).
- Selected Zones: Direct the robot to clean specific areas or rooms.
- Suction Adjustment: Adjust the suction power (4 gears) via the app to suit different cleaning needs.
- Water Flow Adjustment: Control the water output (3 gears) for mopping through the app.
Image 4.2: An illustration of the INXNI X3's LDS navigation technology, showing features like multiple map storage, restricted zones, and intelligent interruption of power supply for continuous cleaning.
4.4 Automatic Return to Charge
- The INXNI X3 will automatically return to its charging base when its battery is low or after completing a cleaning cycle.
- If the battery runs low during a cleaning task, the robot will recharge and then resume cleaning from where it left off.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your INXNI X3.
5.1 Disposable Mop Pads
- After each mopping session, detach the used mop pads and dispose of them.
- Attach new, clean mop pads for the next mopping task.
Image 5.1: A hand removing a disposable mop pad from the INXNI X3, illustrating the ease of daily disposal.
5.2 Emptying the Dust Bin
- Press the release button to remove the 600ml dust bin from the robot.
- Open the dust bin and empty its contents into a trash receptacle.
- Clean the dust bin with a dry cloth or brush.
Image 5.2: A hand removing the 600ml large capacity dust tank from the INXNI X3, designed for efficient debris collection, especially for pet owners.
5.3 Filter Maintenance
- The INXNI X3 is equipped with a washable HEPA filter.
- Remove the filter from the dust bin and rinse it under running water.
- Allow the filter to air dry completely before reinserting it into the dust bin. Do not use the robot with a wet filter.
5.4 Cleaning Brushes and Sensors
- Regularly check and clean the main brush and side brushes for tangled hair or debris. Use the provided hair cutting tool if necessary.
- Wipe the charging contacts, cliff sensors, and wall sensors with a clean, dry cloth to ensure proper function.
6. Troubleshooting
If you encounter issues with your INXNI X3, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Robot does not turn on or charge. | Battery depleted; charging contacts not aligned; power adapter unplugged. | Ensure robot is correctly placed on charging base; check power connection; allow sufficient charging time. |
| Robot gets stuck frequently. | Obstacles (cables, rugs); dirty sensors. | Clear obstacles from cleaning path; clean cliff and wall sensors. |
| Poor cleaning performance. | Dust bin full; brushes tangled; filter clogged; low suction setting. | Empty dust bin; clean brushes; clean/replace filter; increase suction power via app. |
| Mopping is ineffective. | Water tank empty; mop pads dirty/worn; low water flow setting. | Fill water tank; replace disposable mop pads; adjust water flow via app. |
| App connection issues. | Incorrect Wi-Fi password; 5GHz Wi-Fi network; robot too far from router. | Ensure 2.4GHz Wi-Fi; re-enter password; move robot closer to router; restart robot and router. |
If the problem persists, please contact INXNI customer support for further assistance.
7. Specifications
- Brand: INXNI
- Model: X3
- Battery: 3200mAh Li-ion
- Runtime: Up to 120 minutes
- Suction Power: 2000Pa
- Dust Bin Capacity: 600ml
- Water Tank Capacity: 550ml (with 3-gear electric control)
- Noise Level: 58dB (minimum)
- Navigation System: LDS Laser Navigation, Infrared Anti-drop
- Control Methods: INXNI App, Remote Control, Voice Control (Alexa compatible)
- Special Features: Anti-Collision, Anti-Fall, No-Go Zone, Simultaneous Vacuuming & Mopping, Variable Suction Control, 2cm Obstacle Surmounting
- Product Dimensions: Approximately 340mm (L) x 511mm (W) x 175mm (H)
- Item Weight: 5.5 Kilograms
8. Warranty and Support
8.1 Warranty Information
For detailed warranty terms and conditions, please refer to the warranty card included with your product or consult the retailer where you purchased the INXNI X3. Warranty coverage may vary by region and retailer.
8.2 Customer Support
If you require technical assistance, have questions about your product, or need to report an issue, please contact INXNI customer support through the following channels:
- INXNI App: Access support features directly within the application.
- Official INXNI Website: Visit the official INXNI website for FAQs, troubleshooting guides, and contact information.
