Andis 38335

Andis Professional Heat Ceramic Press Comb User Manual

Model: 38335

Andis Professional Heat Ceramic Press Comb

Image: Andis Professional Heat Ceramic Press Comb, showcasing its gold ceramic comb and black handle.

Product Overview

The Andis Professional Heat Ceramic Press Comb is designed to provide a smooth and sleek look for various hair types, including coarse hair, wigs, weaves, and synthetic hair. This comb features rapid heating, adjustable temperature settings, and safety features for convenient and effective styling.

Safety Information

Important Safety Precautions:

  • Keep the device away from water and flammable materials to prevent hazards.
  • Avoid direct contact of the heated comb with skin to prevent burns.
  • Always unplug the device when it is not in use or before cleaning.
  • This product complies with all regulatory requirements for hair iron products.

Key Features

  • Ceramic Heat Comb: Ceramic-coated combs ensure uniform heat distribution, reducing thermal damage and promoting smoother, healthier hair.
  • Fast Heating: Heats up in 30 seconds, minimizing waiting time.
  • Adjustable Heat Settings: Features 20 variable heat settings to suit all hair types.
  • Auto Shut-Off: Automatically powers off after 30 minutes of inactivity for enhanced safety.
  • Dual Voltage: Operates on 120/240 volts and 50/60 hertz, suitable for international travel.
  • Swivel Cord: A 360° swivel cord prevents tangles during use.
  • Ergonomic Design: Sturdy grip handle and lightweight design reduce wrist fatigue during extended use.

Setup

  1. Unpack the Andis Professional Heat Ceramic Press Comb and ensure all components are present and undamaged.
  2. Place the comb on a heat-resistant surface before plugging it into an electrical outlet.
  3. Verify that the voltage of your outlet matches the comb's dual voltage capability (120/240V).
Andis Press Comb with controls visible

Image: The Andis Press Comb showing its power cord and control buttons.

Operating Instructions

  1. Plug the comb into a suitable electrical outlet.
  2. Turn on the comb using the power switch.
  3. Select your desired heat setting from the 20 available options. Lower settings are recommended for fine or damaged hair, while higher settings are suitable for coarse or resistant hair.
  4. Allow approximately 30 seconds for the comb to reach the selected temperature.
  5. Gently press the heated comb through sections of your hair, beard, wig, or other hair types, starting from the roots and moving towards the ends.
  6. Repeat as necessary until the desired smoothness and sleekness are achieved.
  7. After use, turn off the comb and unplug it from the outlet. The auto shut-off feature will activate after 30 minutes of inactivity for added safety.
Woman using Andis Press Comb on curly hair

Image: A woman using the Andis Press Comb to straighten her hair, demonstrating its application.

Woman using Andis Press Comb in front of a mirror

Image: A woman styling her hair with the Andis Press Comb while looking into a mirror.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Andis Press Comb.

  • Always ensure the comb is unplugged and completely cool before cleaning.
  • Wipe the ceramic comb and handle with a soft, damp cloth to remove any hair product residue. Do not use abrasive cleaners or immerse the comb in water.
  • Store the comb in a dry, safe place, away from moisture and direct sunlight.
  • Regularly check the power cord for any signs of damage. If the cord is damaged, discontinue use and contact customer support.

Troubleshooting

ProblemPossible CauseSolution
Comb does not heat up.Not plugged in correctly, power outlet issue, or device malfunction.Ensure the comb is securely plugged into a working outlet. Check if the power switch is ON. If issues persist, contact customer support.
Comb heats up slowly.Insufficient warm-up time or low heat setting selected.Allow the full 30 seconds for heating. Increase the heat setting if needed for your hair type.
Hair is not straightening effectively.Heat setting too low, sections of hair too large, or comb not clean.Increase the heat setting. Work with smaller sections of hair. Clean the comb to remove residue.
Comb automatically shuts off during use.Auto shut-off feature activated due to inactivity.This is a safety feature. If you need to continue styling, simply turn the comb back on.

Specifications

Model Number38335
Product Dimensions10.5 x 1 x 1.5 inches (Comb); 12 x 2 x 2 inches; 14.4 ounces (Packaging)
MaterialCeramic, Metal, Plastic
ColorCeramic Gold
Heat-Up Time30 seconds
Heat Settings20 adjustable settings
Auto Shut-Off30 minutes of inactivity
VoltageDual Voltage (120/240V, 50/60Hz)
ManufacturerAndis
UPC040102383359
Close-up of Andis Press Comb teeth

Image: A detailed view of the ceramic gold teeth of the Andis Press Comb.

Warranty and Support

For detailed warranty information, product registration, or technical support, please visit the official Andis website or contact their customer service department.

You can find more information and contact details at: Andis Official Store

© 2023 Andis Company. All rights reserved.

Related Documents - 38335

Preview Andis AN-562170 Profesionali Plaukų Kirpimo Mašinėlė Naudojimo Instrukcija
Ši naudojimo instrukcija pateikia išsamias Andis AN-562170 profesionalios plaukų kirpimo mašinėlės naudojimo, saugos, įkrovimo, priežiūros ir peiliukų keitimo instrukcijas.
Preview Andis HVD-1 Professional Hair Dryer User Manual and Care Guide
Comprehensive guide for the Andis HVD-1 professional hair dryer, covering important safety precautions, operating instructions, maintenance, cleaning, and warranty information.
Preview Andis HVS-1 Hair Dryer User Manual and Care Guide
This guide provides essential safety precautions, operating instructions, maintenance tips, and warranty information for the Andis HVS-1 hair dryer. Learn how to safely use and care for your appliance, including understanding its ALCI shock protection feature.
Preview Andis ABC-1 Cordless Hair Clipper: User Manual & Care Guide
Official user manual and care guide for the Andis ABC-1 cordless hair clipper. Learn about safe operation, charging, maintenance, blade adjustment, and warranty for professional grooming.
Preview Andis Master & Master Cordless Adjustable Blade Series Clipper Guide
Explore the Andis Master and Master Cordless Adjustable Blade Series, featuring Fade, Phaze, Taper, and Phat cutters. This guide details cut lengths, tooth counts, and specifications for professional barbers and stylists.
Preview Andis Elevate Speedmaster Clipper PM-1 - Professional Hair Trimmer
Detailed information on the Andis Elevate Speedmaster Clipper (Model PM-1), featuring 4X cutting power, adjustable stainless-steel blade, and professional pivot motor. Includes specifications and included accessories.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.