Introduction
This instruction manual provides essential information for the safe and efficient use of your Sonix x Sanrio MagSafe Wireless Power Bank. Please read this manual thoroughly before operating the device and retain it for future reference.
Package Contents
- 1x Sonix x Sanrio MagSafe Wireless Power Bank (5000 mAh)
- 1x USB-C Charging Cable
Note: A power adapter and Lightning cable are not included.
Product Features
- 5000 mAh Battery Capacity
- MagSafe Compatible Wireless Charging
- Fast Charging Capability
- Slim and Lightweight Design
- USB-C Port for Input/Output
- USB-A Port for Output Only
Image: The power bank measures 5 inches in length, 2.75 inches in width, and 0.25 inches in thickness. It features a USB-C port for both input and output, and a USB-A port for output only.
Getting Started (Setup)
1. Charging the Power Bank
- Connect the included USB-C charging cable to the USB-C port on the power bank.
- Plug the other end of the USB-C cable into a compatible USB-C power adapter (not included).
- The LED indicator lights on the power bank will illuminate to show the charging status. A blinking LED indicates charging, and solid LEDs indicate charge level.
2. Understanding LED Indicators
The power bank features LED lights that indicate the remaining battery capacity:
- 1 LED: 0-25% charged
- 2 LEDs: 25-50% charged
- 3 LEDs: 50-75% charged
- 4 LEDs: 75-100% charged
Image: Visual guide for recharging the power bank using its USB-C port and charging a device wirelessly via MagSafe or wired using USB-A or USB-C. Recharging from a USB-A port is not supported.
Using the Power Bank (Operating Instructions)
1. Wireless Charging (MagSafe Compatible)
- Ensure the power bank is sufficiently charged.
- Align the power bank with the back of your MagSafe compatible iPhone (iPhone 12, 13, or 14 series) or MagSafe compatible phone case. The magnets will automatically snap into place.
- Press the power button on the power bank to initiate wireless charging. The LED indicators will light up.
- The phone's screen will display the charging animation.
Image: The Sonix x Sanrio MagSafe Power Bank magnetically attached to the back of an iPhone, indicating wireless charging in progress.
Image: An illustration demonstrating the MagSafe connection between the power bank and a compatible iPhone, highlighting the magnetic alignment for wireless charging.
2. Wired Charging
The power bank supports wired charging for various devices using its USB-C and USB-A ports.
- USB-C Port (Input/Output): Use a USB-C to USB-C cable (not included) to charge devices that support USB-C input.
- USB-A Port (Output Only): Use a USB-A to Lightning cable (not included) or other compatible USB-A cables to charge devices.
- Connect your device to the appropriate port on the power bank using a compatible charging cable.
- Press the power button on the power bank to begin charging.
3. Compatibility
The MagSafe wireless charging feature is compatible with iPhone 14, iPhone 13, and iPhone 12 series models, especially when used with MagSafe certified phone cases.
Image: A detailed chart indicating compatibility with all iPhone 14, iPhone 13, and iPhone 12 series models for MagSafe wireless charging.
Care and Maintenance
- Keep the power bank dry. Do not expose it to moisture or liquids.
- Avoid extreme temperatures. Do not store in very hot or cold environments.
- Clean the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Handle with care. Avoid dropping or subjecting the power bank to strong impacts.
- When not in use for extended periods, charge the power bank at least once every three months to maintain battery health.
Troubleshooting
- Power bank not charging: Ensure the USB-C cable is securely connected to both the power bank and a working power adapter. Try a different cable or adapter.
- Device not charging wirelessly: Ensure your device is MagSafe compatible and properly aligned with the power bank. Press the power button on the power bank. Remove any non-MagSafe cases that might interfere with the connection.
- Device not charging via cable: Ensure the cable is securely connected to both the power bank and your device. Verify the cable is not damaged and is compatible with your device. Press the power button on the power bank.
- Slow charging: Ensure you are using a fast-charging compatible adapter for the power bank. For device charging, ensure your cable and device support fast charging.
- LED indicators not working: The power bank might be fully discharged. Charge it for a period to see if the indicators resume function.
Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 305-0001-001 |
| Battery Capacity | 5000 Milliamp Hours (mAh) |
| Output Power | 18.5W |
| Product Dimensions | 5 x 2.75 x 0.25 inches |
| Item Weight | 5.2 ounces |
| Connector Type | USB Type C (Input/Output), USB Type A (Output Only) |
| Special Features | Fast Charging, Slim Design, Wireless Charging (MagSafe Compatible) |
| Manufacturer | Dongguan Huili Electronics Co., Ltd |
Image: A close-up view of the power bank, showcasing its Hello Kitty and Friends design.
Warranty and Support
This Sonix product comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.
For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official Sonix website.
