Introduction
Thank you for choosing the Vanity Art VA6817-L-MB 67-inch Freestanding Bathtub. This manual provides essential information for the safe installation, proper operation, and effective maintenance of your new bathtub. Please read all instructions carefully before beginning installation or use to ensure optimal performance and longevity of the product.
Safety Information
- Always handle the bathtub with care. Due to its size and weight, a minimum of two people is required for lifting and positioning.
- Ensure the installation area is structurally sound and can support the weight of the bathtub when filled with water and a person.
- Professional plumbing installation is recommended to ensure proper water supply and drainage connections, preventing leaks and water damage.
- Do not use abrasive cleaners or harsh chemicals on the bathtub surface, as this can damage the acrylic finish.
- Verify all connections are watertight before regular use.
Product Components
The Vanity Art VA6817-L-MB bathtub package includes the following main components:
- Freestanding Acrylic Bathtub
- Pop-up Drain Assembly
- Overflow System
- Adjustable Leveling Feet
- Installation Hardware (gaskets, nuts, etc.)
Tools Required for Installation
- Adjustable Wrench
- Level
- Caulking Gun and Silicone Sealant (bathroom grade)
- Measuring Tape
- Safety Gloves
- Utility Knife
Setup and Installation
Follow these steps for proper installation of your freestanding bathtub. Professional installation is highly recommended.
1. Unpacking and Inspection
- Carefully open the packaging using a utility knife, ensuring not to scratch the bathtub surface.
- Remove all packing materials and inspect the bathtub for any signs of damage. Report any damage immediately to the retailer.
- Confirm all components listed in the 'Product Components' section are present.
Image: Side view of the Vanity Art VA6817-L-MB freestanding bathtub.
Image: Top view of the bathtub, highlighting the drain and overflow.
2. Drain and Overflow Assembly
- Apply a bead of silicone sealant around the top flange of the pop-up drain.
- Insert the drain into the bathtub's drain hole from the inside.
- From underneath the tub, attach the rubber gasket and tighten the locking nut onto the drain body. Ensure a secure, watertight seal.
- Connect the flexible drain hose to the pop-up drain and the overflow assembly. Ensure all connections are hand-tightened and then secured with a wrench, being careful not to overtighten.
Video: This official Vanity Art installation video demonstrates the steps for assembling the drain and overflow system, as well as general bathtub placement.
3. Positioning and Leveling
- Carefully move the bathtub to its desired final location.
- Use a level to check the bathtub's stability. Adjust the leveling feet located on the bottom of the tub until it is perfectly level and stable on all sides.
Image: Detailed dimensional drawing of the bathtub, useful for planning placement.
4. Water Supply and Final Sealing
- Connect the water supply lines to your chosen faucet (faucet not included with bathtub). Ensure all connections are tight and leak-free.
- Once the tub is in its final position and all plumbing connections are made, apply a continuous bead of silicone sealant around the base of the bathtub where it meets the floor. This prevents water from seeping underneath and provides additional stability.
- Allow the sealant to cure completely according to the manufacturer's instructions before filling the tub.
Operating Instructions
Using your Vanity Art freestanding bathtub is straightforward:
- Filling the Bathtub: Ensure the pop-up drain is closed. Turn on the water supply from your faucet to fill the tub to your desired level. The overflow system will prevent overfilling.
- Draining the Bathtub: To drain the tub, simply press the pop-up drain to open it. The water will flow out through the connected drain system.
Image: The bathtub in a bathroom setting, ready for use.
Maintenance and Care
Proper care will keep your acrylic bathtub looking new for years.
Cleaning the Bathtub
- For daily cleaning, use a soft cloth or sponge with mild, non-abrasive soap and warm water.
- Rinse thoroughly after cleaning to remove all soap residue.
- Avoid using abrasive cleaners, scouring pads, steel wool, or harsh chemicals (e.g., acetone, paint thinner, strong acids or bases) as these can damage the acrylic surface.
- The acrylic material is designed to be stain and scratch-resistant, making maintenance easy.
Image: Illustration of the bathtub's stain-resistant, non-porous acrylic surface.
Material Construction
The bathtub features a multi-layer reinforced construction for durability and strength:
- Acrylic Sheet Layer (inner and outer)
- Thermal Glass Fiber
- Structural Reinforcement
- Resin Insulation Layer
Image: Diagram detailing the multi-layer construction of the bathtub for enhanced durability.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose drain connections, insufficient sealant at base. | Check and tighten all drain connections. Reapply silicone sealant around the base if necessary. |
| Slow Drainage | Hair or debris in the drain, improper drain installation. | Remove and clean the pop-up drain. Inspect drain pipe for obstructions. Ensure drain is installed correctly. |
| Bathtub is Unstable/Wobbles | Uneven floor, leveling feet not properly adjusted. | Adjust the leveling feet until the bathtub is stable. Use a level to verify. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | VA6817-L-MB |
| Material | Acrylic |
| Product Dimensions | 59"L x 29.5"W x 24"H (Note: Product title states 67"L, but specifications list 59"L. Please verify with product packaging.) |
| Capacity | 21.5 Gallons |
| Installation Type | Freestanding |
| Shape | Rectangular |
| UPC | 810025968014 |
| Item Weight | 120 pounds |
Warranty and Support
This Vanity Art bathtub comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical assistance, or any questions regarding your product, please contact Vanity Art customer support.
You can visit the official Vanity Art store on Amazon for more information and support: Vanity Art Store
