1. Introduction
Thank you for choosing the Belord 3-Piece Patio Furniture Set. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new outdoor furniture. Please read all instructions carefully before beginning assembly or use.
Image: The complete Belord 3-piece patio furniture set, featuring two swivel rocking chairs and a side table, arranged on an outdoor rug in a patio setting.
2. Safety Information
- Maximum Load Capacity: Each chair in this set has a maximum load capacity of 350 lbs. Do not exceed this weight limit.
- Assembly Precautions: During assembly, leave all screws slightly loose until all components are in place and aligned. Once aligned, tighten all screws securely.
- Weather Protection: For extended product life, provide cover or store the furniture in extreme weather conditions (e.g., heavy rain, snow, strong winds).
- Stability: Ensure the furniture is placed on a flat, stable surface. The chair bases include non-slip pads for enhanced stability.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Swivel Rocking Chairs (Mixed Grey Wicker / Beige Cushion)
- 1 x Side Table (Mixed Grey Wicker / Tempered Glass Top)
- Assembly Hardware Kit (screws, washers, Allen wrench)
- Instruction Manual
Image: Diagram highlighting ergonomic features of the chair, including high back, deep seat, seat height, and broad armrest.
4. Assembly Instructions
Assembly is required for the chairs and the side table. It is recommended to have two people for easier assembly, especially for the chairs. An electric screwdriver with an appropriate Allen bit can expedite the process.
4.1. Assembly Overview
Image: Table showing estimated assembly times for various Belord furniture pieces. For this set, refer to "2 Swivel Rockers" (40 minutes) and "Side Table" (15 minutes).
4.2. General Assembly Tips
- Identify all parts and hardware before starting.
- Do not fully tighten screws until all components are loosely assembled and aligned. This prevents misalignment and difficulty in fitting parts.
- Use the provided Allen wrench or an electric screwdriver with a compatible bit for faster assembly.
4.3. Swivel Rocking Chair Assembly
- Attach the chair back to the seat frame using the specified bolts and washers. Do not tighten fully.
- Connect the armrests to the seat and back frame. Ensure proper alignment. Do not tighten fully.
- Secure the assembled chair top to the swivel/glide base.
- Once all parts are connected and aligned, gradually tighten all bolts until secure.
- Place the seat and back cushions onto the chair.
4.4. Side Table Assembly
- Attach the legs to the table frame using the provided hardware. Do not tighten fully.
- If applicable, attach the lower shelf to the legs. Do not tighten fully.
- Ensure all parts are aligned, then tighten all bolts securely.
- Carefully place the tempered glass top onto the table frame.
Image: Detailed view of the side table, showcasing its tempered glass top and additional storage space on the lower shelf.
5. Operating Instructions
5.1. Swivel and Glide Functionality
The swivel rocking chairs are designed for enhanced comfort and movement:
- 360-Degree Swivel: The chair base allows for a full 360-degree rotation. Simply turn the chair in your desired direction.
- Smooth Glide: The chairs also feature a gentle gliding motion, allowing for a relaxing back-and-forth movement.
Image: Visual representation of the chair's 360-degree swivel capability, showing the rotating base mechanism.
Image: Illustration demonstrating the smooth gliding action of the chair, highlighting the anti-slip protectors on the base.
5.2. Cushion Usage
The included cushions are designed for comfort and durability:
- Place the thicker seat cushion on the chair seat and the thinner back cushion against the chair back.
- The cushions are made from water-resistant olefin fabric, suitable for outdoor use.
6. Maintenance
6.1. General Cleaning
- Wipe the wicker and frame with a damp cloth to remove dust and dirt.
- For stubborn stains, use a mild soap solution and rinse thoroughly.
- Ensure the furniture is completely dry before covering or storing.
6.2. Cushion Care
- The cushion covers are removable via zippers for easy cleaning.
- Hand wash or machine wash on a gentle cycle with cold water and mild detergent. Air dry only; do not tumble dry.
- To restore cushion fluffiness after unpacking, gently press and fluff. Allow 24-48 hours for full fluffiness and 7-15 days for minor creases to disappear.
Image: Step-by-step visual guide on how to unpack, fluff, and restore the cushions to their full shape and comfort.
6.3. Wicker and Frame Durability
The furniture features weather-resistant PE wicker and a powder-coated rustproof steel frame for durability.
Image: Infographic detailing the durable and weather-resistant properties of the Belord thickened wicker material, including anti-impact, fade-resistant, tear-resistant, and UV 2000+ ratings.
7. Troubleshooting
- Missing or Damaged Parts: If any package components are missing or damaged upon arrival, please contact Belord customer service immediately for a prompt and satisfactory resolution.
- Difficulty with Assembly: If screws are difficult to insert or align, ensure all other screws are loose. Gently adjust components to align holes before tightening. Do not force screws.
- Unstable Chair/Table: Check that all bolts are securely tightened. Ensure the furniture is on a level surface.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Belord |
| Model Number | B024-3 |
| Material | PE Wicker, Powder-coated Steel Frame, Olefin Fabric Cushions, Tempered Glass |
| Color | Mixed Grey Wicker / Beige Cushion |
| Item Dimensions (L x W x H) | 32 x 31.75 x 35 inches (Chair), 20 x 20 x 22 inches (Side Table) |
| Item Weight | Approximately 99.2 pounds (Total for set) |
| Special Features | 360-degree Swivel, Gliding Motion, Water-resistant Cushions, Tempered Glass Tabletop |
| Load Capacity (per chair) | 350 lbs |
Image: Close-up of the cushion, detailing its 4-inch thickness, high resilience foam, water-resistant olefin fabric cover, and removable zippered design for easy cleaning.
9. Warranty and Customer Support
Belord is committed to providing high-quality products and excellent customer service. If you encounter any issues or have questions regarding your patio furniture set, please contact our customer support team.
- After-sales Service: We maintain strict quality control procedures. In the event of missing or damaged parts during shipping, contact us directly for a prompt and satisfactory resolution.
- Contact Information: Refer to your purchase documentation or the Belord official website for current customer service contact details.