1. Introduction
Thank you for choosing the VAYINATO Sobo WP-5001 Aquarium Internal Filter. This filter is designed to provide efficient filtration, water circulation, oxygenation, and wave-making functions for your aquarium, ensuring a clean and healthy environment for your aquatic life. Please read this manual carefully before installation and operation to ensure proper use and maintenance.
2. Safety Instructions
- Always disconnect the power supply before performing any maintenance, cleaning, or installation procedures.
- Ensure the voltage indicated on the filter matches your local power supply (220-240V).
- This appliance is designed for indoor use only and must be fully submersible in water during operation.
- Do not operate the filter if the power cord or plug is damaged.
- Keep the filter and its power cord out of reach of children and pets.
- Never pull the filter out of the water by its power cord.
3. Product Features
- Quiet Operation: Features an internal noise-reducing design for a quiet environment.
- Multi-functional: Provides efficient filtration, water pumping, oxygenation, and wave-making.
- Easy Installation & Cleaning: Equipped with strong suction cups for secure mounting and designed for easy disassembly and cleaning.
- Fully Submersible: The motor is epoxy sealed for complete submersion.
- Suitable Tank Size: Recommended for aquariums up to 3.5 feet.
4. Components Overview
The VAYINATO Sobo WP-5001 filter consists of several key parts:
- Motor Head: Contains the pump impeller and electrical components.
- Filter Media Container: Houses the filter sponges and other media.
- Filter Sponges: Provides mechanical and biological filtration.
- Air Tube & Air Regulator: For oxygenation function.
- Suction Cups: For attaching the filter to the aquarium glass.
Figure 1: Filter dimensions. The filter measures approximately 38 cm in height and 9 cm in width.
Figure 2: 3-Stage Filtration. Water passes through a 2-layer filter sponge, an excreta container, and then mechanical and biological filtration media.
5. Setup and Installation
- Unpack: Carefully remove all components from the packaging. Inspect for any damage.
- Assemble Filter Media: Ensure the filter sponges are correctly placed within the filter media container. If additional media is provided, place it as instructed.
- Attach Suction Cups: Securely attach the suction cups to the motor head of the filter.
- Position in Aquarium: Place the filter inside your aquarium, ensuring it is fully submerged in water. Use the suction cups to firmly attach it to the inner glass wall.
- Connect Air Tube (Optional): If you wish to use the oxygenation feature, connect the provided air tube to the air intake nozzle on the motor head. Position the other end of the air tube above the water surface, using the air regulator to control airflow.
- Power On: Once the filter is securely installed and fully submerged, plug the power cord into a suitable electrical outlet.
Figure 3: Filter installed in an aquarium, demonstrating its multi-functional capabilities.
6. Operation
The VAYINATO Sobo WP-5001 filter is designed for continuous operation to maintain water quality. Once installed and powered on, it will begin its functions:
- Filtration: Water is drawn into the filter, passing through the media to remove debris and harmful substances.
- Water Circulation: The pump creates a steady flow of water, ensuring even distribution of temperature and nutrients.
- Oxygenation: If the air tube is connected, the filter will draw in air and release fine bubbles into the water, increasing dissolved oxygen levels. Adjust the air regulator for desired bubble intensity.
- Wave-making: The outflow design contributes to gentle water movement, simulating natural currents.
Figure 4: Filter in operation, showing water outflow.
7. Maintenance
Regular cleaning and maintenance are crucial for the optimal performance and longevity of your filter. Perform maintenance at least once a month, or more frequently depending on your aquarium's bioload.
- Disconnect Power: Always unplug the filter from the power outlet before handling.
- Remove Filter: Carefully detach the filter from the aquarium glass and remove it from the water.
- Disassemble: Gently separate the motor head from the filter media container. Remove the filter sponges and any other media.
- Clean Filter Media: Rinse the filter sponges and media thoroughly with old aquarium water (from a water change) to preserve beneficial bacteria. Avoid using tap water directly, as chlorine can harm these bacteria.
- Clean Impeller: Remove the impeller cover and carefully extract the impeller. Clean the impeller and its housing with a small brush to remove any debris or mineral buildup.
- Clean Housing: Rinse the filter housing and other components with aquarium water.
- Reassemble & Reinstall: Put all components back together in reverse order. Ensure everything is securely fitted. Reinstall the filter in the aquarium and plug it back in.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Filter not starting | No power; Impeller jammed; Air in pump | Check power connection; Clean impeller; Ensure filter is fully submerged and free of air. |
| Weak water flow | Clogged filter media; Dirty impeller; Air intake blocked | Clean filter sponges and media; Clean impeller; Check air tube for blockages. |
| Noisy operation | Impeller dirty or damaged; Air in pump; Improper assembly | Clean or replace impeller; Gently shake filter to release air; Reassemble correctly. |
| Water not clear | Clogged filter media; Filter too small for tank; Insufficient water changes | Clean filter media regularly; Ensure filter is appropriate for tank size; Perform regular water changes. |
9. Specifications
| Specification | Value |
|---|---|
| Model | WP-5001 |
| Power | 40W |
| Output (F.Max) | 2800 L/H |
| Voltage | 220-240V |
| Suitable Tank Size | Up to 3.5 Feet |
| Item Weight | 720 g |
| Package Dimensions | 37.7 x 13.8 x 7.4 cm |
10. Warranty and Support
This VAYINATO product is manufactured with high-quality standards. For any warranty claims or technical support, please refer to your purchase documentation or contact the retailer where the product was purchased. Keep your proof of purchase for warranty purposes.