CP Insider 400 A7 Neon Cut Gloves User Manual

1. Introduction

The CP Insider 400 A7 Neon Cut Gloves are designed to provide superior hand protection in various work environments. These gloves offer excellent levels of both cut and puncture resistance, ensuring user safety while maintaining the necessary dexterity for performing tasks. Constructed from a lightweight, breathable knit with an elasticated cuff, they are engineered for comfort during extended wear.

2. Key Features

• Advanced Protection: Provides excellent cut and puncture resistance (A7 cut level).
• Lightweight Design: Ensures comfort and reduces hand fatigue during prolonged use.
• Breathable Material: Promotes airflow to keep hands cool and dry.
• Enhanced Dexterity: Allows for precise handling of tools and materials.
• Elasticated Cuff: Offers a secure and comfortable fit, preventing debris entry.

3. Setup and Donning

To ensure proper fit and protection, follow these steps when donning your CP Insider 400 A7 Neon Cut Gloves:

1. Ensure hands are clean and dry before putting on gloves.
2. Slide each hand into the corresponding glove, ensuring fingers are fully seated in the fingertips.
3. Adjust the elasticated cuff to sit comfortably and securely around the wrist.
4. Verify that the gloves allow for full range of motion and dexterity without feeling overly tight or loose.

4. Operating and Usage

These gloves are intended for use in environments requiring protection against cuts and punctures. Always assess the specific hazards of your task and ensure the gloves are appropriate for the level of protection required. While highly resistant, no glove can provide absolute protection against all hazards. Always exercise caution when handling sharp or hazardous materials.

Important Considerations:

• Do not use gloves that are damaged, torn, or show signs of excessive wear.
• Ensure the gloves fit properly to maximize dexterity and minimize snagging hazards.
• Regularly inspect gloves for any signs of degradation before and after each use.

5. Maintenance and Care

Proper care extends the lifespan and effectiveness of your CP Insider 400 A7 Neon Cut Gloves.

Cleaning Instructions:

• Hand Wash Only: Wash gloves by hand using mild soap and cool water.
• Gently agitate to remove dirt and contaminants.
• Rinse thoroughly until all soap residue is gone.
• Do not bleach, iron, or dry clean.
• Drying: Air dry gloves away from direct heat or sunlight. Lay flat or hang to dry completely before storage or reuse.

Storage: Store gloves in a cool, dry place away from direct sunlight and chemicals.

6. Troubleshooting and Replacement

While durable, safety gloves have a finite lifespan. Regular inspection is crucial for identifying when replacement is necessary.

Common Issues and Solutions:

• Reduced Protection: If gloves show signs of cuts, tears, fraying, or thinning of the material, their protective capabilities may be compromised.
• Loss of Fit: If gloves become stretched out or no longer fit securely, they may not provide optimal protection or dexterity.
• Persistent Odor/Contamination: If gloves retain strong odors or cannot be adequately cleaned after exposure to hazardous substances, they should be replaced.

When to Replace: Replace gloves immediately if any damage is observed, or if they no longer provide the required level of protection or comfort. The lifespan of the gloves depends on the frequency and intensity of use, as well as the specific work environment.

7. Specifications

8. Product Visuals

This image shows a CP Insider 400 A7 Neon Cut Glove on a hand, holding a syringe with a bent needle. The glove's material is visible, highlighting its protective qualities against sharp objects while maintaining dexterity. The blue 'TURTLESKIN INSIDER' logo is visible on the back of the hand.

9. Warranty and Support

For information regarding warranty coverage or product support, please refer to the manufacturer's official documentation or contact Mallory Safety and Supply directly. Contact details can typically be found on the product packaging or their official website.