TaylorMade STEALTH2 Golf Driver Instruction Manual

1. Introduction

Welcome to the instruction manual for your new TaylorMade STEALTH2 Golf Driver. This driver is a 2023 model designed to deliver exceptional distance and forgiveness, enhancing your performance on the golf course. Its innovative construction, featuring advanced carbon and titanium materials, aims to provide improved shot straightness and a consistent feel.

Please read this manual thoroughly to understand the features, proper usage, and maintenance of your driver to ensure its longevity and optimal performance.

2. Product Components and Features

The TaylorMade STEALTH2 Driver incorporates several key technologies and components:

• 60-Layer Carbon Twist Face: A revolutionary face design that optimizes energy transfer for increased ball speed and forgiveness across the face.
• Titanium Frame Body: Provides a stable and rigid structure for the driver head.
• Carbon Crown and Sole: Strategic use of lightweight carbon in the crown (6 layers) and sole (9 layers) allows for precise weight distribution, lowering the center of gravity for optimal launch and spin.
• Special Reinforced Carbon Composite Ring: Enhances the structural integrity of the driver head.
• Front TSS Weight: Contributes to the driver's balance and stability.
• Diamana GT 60 Shaft: A high-performance shaft designed to complement the driver head's characteristics.
• TM Tour Velvet 360 Black Grip: Provides excellent feel and control.

Figure 2.1: Overview of the TaylorMade STEALTH2 Golf Driver.

Figure 2.2: Close-up of the 60-layer Carbon Twist Face.

Figure 2.3: View of the driver's sole, highlighting the carbon construction.

Figure 2.4: The Diamana GT 60 shaft.

Figure 2.5: The TM Tour Velvet 360 Black grip.

3. Setup and Initial Use

Your TaylorMade STEALTH2 Driver is designed for immediate use. It comes with a protective head cover.

3.1 Unpacking

1. Carefully remove the driver from its packaging.
2. Remove the protective plastic film from the club head and grip, if present.
3. Place the included head cover on the driver head when not in use to protect it from damage.

Figure 3.1: The included STEALTH2 headcover.

3.2 Loft and Lie Adjustment (If Applicable)

The STEALTH2 driver features an adjustable hosel that allows for changes to the loft and lie angle. This driver is available in 9° and 10.5° loft options. While the driver is adjustable, please note that an adjustment wrench is not included with the product. If you wish to adjust the settings, you will need a compatible TaylorMade torque wrench.

Consult a qualified golf professional for assistance with adjustments to ensure proper settings for your swing and to avoid damage to the club.

Figure 3.2: The adjustable hosel mechanism.

4. Operating Your Driver

The TaylorMade STEALTH2 Driver is designed to maximize your distance and accuracy off the tee. Proper technique is crucial for optimal performance.

4.1 Basic Usage

1. Stance and Ball Position: For a driver, position the ball off the heel of your lead foot. Maintain a balanced stance with your weight slightly favoring your back foot.
2. Swing Path: Aim for a slightly upward angle of attack at impact to maximize launch and minimize spin, taking advantage of the driver's low center of gravity.
3. Impact: The 60-layer Carbon Twist Face is engineered to provide forgiveness across a wider area of the face. Aim for the center, but off-center strikes will still yield impressive results due to the face technology.
4. Follow Through: Complete your swing with a full, balanced follow-through.

4.2 Performance Characteristics

The STEALTH2 driver's design, including its carbon construction and titanium frame, contributes to:

• Increased Ball Speed: The carbon face promotes higher ball speeds across a larger area.
• Enhanced Forgiveness: The multi-material construction and strategic weight placement help maintain ball speed and direction on mis-hits.
• Optimized Launch and Spin: The low and deep center of gravity, achieved through carbon crown and sole, helps produce an ideal launch angle with reduced spin for longer carries.

5. Care and Maintenance

Proper care will extend the life and maintain the performance of your TaylorMade STEALTH2 Driver.

5.1 Cleaning

• Club Head: After each round, wipe the club head clean with a damp cloth to remove dirt, grass, and debris. For stubborn dirt, use a mild soap solution and a soft brush, then rinse and dry thoroughly.
• Face: Pay special attention to the club face grooves. Keep them clean to ensure proper spin and control.
• Shaft: Wipe the shaft with a soft, damp cloth. Avoid harsh chemicals that could damage the shaft's finish.
• Grip: Clean the grip periodically with mild soap and water to remove oils and dirt, which can cause slippage. Allow the grip to air dry completely before use.

5.2 Storage

• Always use the provided head cover when the driver is not in use or when transporting it to protect the club head from scratches and dents.
• Store your driver in a cool, dry place, away from extreme temperatures and direct sunlight, which can degrade the grip and shaft materials over time.
• Avoid leaning the club against hard surfaces, which can cause cosmetic damage or structural stress.

6. Troubleshooting

This section addresses common issues you might encounter with your golf driver.

7. Technical Specifications

8. Warranty Information

TaylorMade Golf Company warrants its golf clubs to be free from defects in material and workmanship for a period of two (2) years from the original date of purchase. This warranty applies only to the original purchaser and is not transferable.

The warranty does not cover normal wear and tear, cosmetic damage, or damage caused by misuse, abuse, alteration, or improper assembly. Any modifications to the club will void the warranty.

For specific warranty claims or detailed terms and conditions, please refer to the official TaylorMade Golf website or contact their customer service directly.

9. Customer Support

For further assistance, technical support, or inquiries regarding your TaylorMade STEALTH2 Golf Driver, please contact TaylorMade customer service through their official channels:

• Official Website: Visit the TaylorMade Golf website for FAQs, product registration, and contact information.
• Authorized Retailers: Your local authorized TaylorMade retailer can also provide support and service.

When contacting support, please have your product model number (N8538609) and proof of purchase readily available.