Introduction
This manual provides instructions for the safe and effective use of the Pipedream Fantasy X-tensions Elite Silicone X-tension. This product is designed to provide additional length and girth. It is constructed from Elite Silicone™ for a comfortable and secure fit.
Key features include:
- Removable extender
- Adds approximately 2 inches (51mm) in length
- Increases circumference by up to 66%
- Made from Elite Silicone™
Setup
Before first use, thoroughly clean the Fantasy X-tensions Elite with warm water and a mild, toy-safe soap. Rinse completely and allow to air dry.
Image: The Pipedream Fantasy X-tensions Elite Silicone X-tension, showing its overall shape and texture.
- Ensure the product is clean and dry.
- Apply a generous amount of water-based lubricant to the inside of the extension and to the body part it will be worn on.
- Gently roll the extension onto the body, ensuring a snug and comfortable fit.
- If using the removable extender, insert it into the tip of the main extension before applying the entire unit.
Image: The Pipedream Fantasy X-tensions Elite, disassembled to show the main sleeve and the separate removable extender piece.
Operating Instructions
Once the Fantasy X-tensions Elite is properly fitted and lubricated, it is ready for use.
- The extension is designed to be worn during intimate activity.
- The removable extender can be used to achieve the full 2-inch length increase. If less length is desired, the extender can be omitted.
- Always use with water-based lubricant for optimal comfort and to preserve the silicone material.
Image: A diagram illustrating the 2-inch length added by the extender component of the Pipedream Fantasy X-tensions Elite.
Maintenance and Care
Proper care will ensure the longevity and hygiene of your Fantasy X-tensions Elite.
- Cleaning: After each use, wash the extension thoroughly with warm water and a mild, toy-safe soap or a dedicated toy cleaner. Avoid harsh chemicals or abrasive cleaners.
- Rinsing: Rinse all soap residue completely from the product.
- Drying: Pat dry with a lint-free cloth or allow to air dry completely before storing.
- Storage: Store in a clean, dry, and dust-free environment, away from direct sunlight and extreme temperatures. Avoid storing with other toys made of different materials (e.g., PVC/jelly) to prevent material degradation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Difficulty fitting the extension. | Insufficient lubrication or incorrect application. | Ensure ample water-based lubricant is applied to both the inside of the extension and the body. Roll on gently. |
| Product feels uncomfortable or too tight. | Improper fit or insufficient lubrication. | Re-apply lubricant. If discomfort persists, discontinue use. The product is designed to be elastic and adapt to most sizes. |
| Product appears sticky or degraded. | Improper cleaning or storage with incompatible materials. | Refer to the Maintenance section. Ensure only water-based lubricants are used and store separately from other materials. |
Specifications
| Model Number | 415222 |
| Material | Elite Silicone™ |
| Added Length | Approximately 2 inches (51 mm) with extender |
| Added Girth | Up to 66% |
| Color | Tan |
| Approximate Product Dimensions (L x W x H) | 50 x 50 x 28 cm (Note: These dimensions may refer to packaging or overall product size, not necessarily the wearable portion.) |
| Approximate Product Weight | 330 grams |
Warranty and Support
For information regarding warranty coverage or product support, please refer to the retailer where the product was purchased or visit the official Pipedream website. Keep your proof of purchase for any warranty claims.