Weibath 71-inch Two-Person Jetted Whirlpool Bathtub Instruction Manual

1. Introduction

This manual provides essential information for the safe installation, operation, and maintenance of your Weibath 71-inch Two-Person Jetted Whirlpool Bathtub. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Retain this manual for future reference.

2. Important Safety Information

To reduce the risk of injury, observe the following safety precautions:

• Electrical Safety: All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Ensure the bathtub is connected to a ground fault circuit interrupter (GFCI) protected circuit.
• Water Temperature: Test the water temperature before entering the bathtub. Prolonged immersion in excessively hot water may cause hyperthermia.
• Chemicals: Use only recommended cleaning agents and avoid harsh chemicals that may damage the acrylic surface or internal components.
• Children: Supervise children at all times when they are near or in the bathtub.
• Medical Conditions: Consult a physician before use if you have any medical conditions, including but not limited to heart disease, high blood pressure, diabetes, or pregnancy.
• Installation: Ensure the floor can support the weight of the bathtub when filled with water and occupants. Professional installation is highly recommended.

3. Product Features

Your Weibath whirlpool bathtub is designed to provide a relaxing and therapeutic bathing experience with the following key features:

• Whirlpool Water Jets: 18 powerful water jets deliver a hydromassage, promoting relaxation and muscle relief.
• Air Jets: 20 air jets release comfortable air bubbles for a gentle bubble massage.
• Chromatherapy LED Lighting: Integrated multi-color LED lights create a soothing and atmospheric ambiance.
• Two-Person Capacity: Spacious design accommodates up to two bathers comfortably.
• Ergonomic Design: Features sloped lumbar support and includes two PU pillows for enhanced comfort.
• Durable Construction: Made from high-quality acrylic with fiberglass reinforcement for strength and heat retention.
• Waterfall Spout: An elegant waterfall feature for filling the tub.

4. Components Overview

The following components are included with your Weibath whirlpool bathtub:

• Bathtub unit with integrated jets and lighting
• Tub filler (faucet assembly)
• LCD control panel
• Drain and overflow assembly
• Two PU pillows

5. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your whirlpool bathtub. It is strongly recommended that installation be performed by a licensed plumber and a qualified electrician.

5.1 Pre-Installation Checks

• Verify all components are present and undamaged.
• Ensure the installation area is level and structurally sound to support the bathtub's weight when filled (approximately 118.88 gallons of water plus occupants).
• Confirm access to appropriate electrical and plumbing connections.

5.2 Placement and Dimensions

The bathtub is designed for back-to-wall installation. Consider the following dimensions for proper placement:

• Exterior Dimensions: 71.65" L x 51.97" W x 27.56" H
• Interior Dimensions: 62.99" L x 43.31" W x 22.44" H

5.3 Plumbing and Electrical Connections

• Connect hot and cold water lines to the designated inlets on the tub filler.
• Install the drain and overflow assembly according to manufacturer instructions and local plumbing codes.
• Connect the bathtub's electrical system to a dedicated, GFCI-protected circuit. Refer to the electrical diagram provided with the product for specific wiring instructions.

6. Operating Instructions

Familiarize yourself with the control panel and functions before operating the bathtub.

6.1 Control Panel

The bathtub features an LCD control panel for managing various functions. The panel is waterproof and easy to operate.

• Power Button: Turns the bathtub system on/off.
• Water Jets Pump: Activates and deactivates the whirlpool water jets.
• Air Bubble Force Control: Adjusts the intensity of the air bubble massage.
• LAMP (LED Lighting): Cycles through LED light colors or turns the lighting on/off.
• OZONE: Activates the ozone sterilization function (if equipped).
• FM/AUX Input Selection: Selects audio input source.
• Upward/Downward Arrows: Adjusts settings such as temperature or audio volume.
• SET/Function Selection: Used to enter settings menus or select different functions.

6.2 Filling the Bathtub

• Ensure the drain is closed.
• Use the hot and cold water switches to adjust the desired water temperature.
• Open the inlet faucet or activate the waterfall spout to fill the tub.
• Do not fill above the maximum water level indicated or the jet openings.

6.3 Activating Massage Functions

• Once the tub is filled to the appropriate level, press the 'Water Jets Pump' button on the control panel to start the whirlpool massage.
• Press the 'Air Bubble Force Control' button to activate the air jets. Adjust intensity as desired.

6.4 Chromatherapy LED Lighting

• Press the 'LAMP' button on the control panel to turn on the LED lights.
• Press the 'LAMP' button repeatedly to cycle through different color options or modes.

7. Maintenance and Care

Regular maintenance ensures the longevity and optimal performance of your bathtub.

7.1 Cleaning the Bathtub Surface

• Clean the acrylic surface with a soft cloth and a non-abrasive, mild bathroom cleaner.
• Avoid abrasive cleaners, scouring pads, or harsh chemicals (e.g., acetone, paint thinner) as they can damage the finish.
• Rinse thoroughly with clean water after cleaning.

7.2 Cleaning the Jet System

• Periodically fill the tub with warm water above the jets. Add a small amount of a specialized jet cleaner or a mild disinfectant.
• Run the whirlpool system for 10-15 minutes.
• Drain the tub, refill with clean water, and run the jets again for a few minutes to rinse.

7.3 Drain and Overflow

• Regularly check the drain and overflow for debris and clean as necessary to prevent blockages.

8. Troubleshooting

If you encounter issues with your bathtub, refer to the following common problems and solutions:

• No Power to the Bathtub:
  • Check the main power supply and ensure the GFCI breaker has not tripped.
  • Verify all electrical connections are secure.
• Water Jets Not Working:
  • Ensure the water level is above the jet openings.
  • Check if the water pump is receiving power and is not obstructed.
  • Inspect jets for blockages and clean if necessary.
• Air Jets Not Working:
  • Verify the air blower is receiving power.
  • Check for any obstructions in the air lines or jet openings.
• LED Lights Not Functioning:
  • Ensure the 'LAMP' button on the control panel has been pressed.
  • Check electrical connections to the LED system.
• Water Leakage:
  • Immediately turn off the water supply and power.
  • Inspect all plumbing connections, including the drain and overflow, for loose fittings or damage.
  • Contact a qualified plumber for assistance.

If these steps do not resolve the issue, please contact customer support.

9. Technical Specifications

10. Warranty and Support

10.1 Warranty Information

This Weibath whirlpool bathtub comes with a 5-Year Limited Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use and service. Please retain your proof of purchase for warranty claims. For specific terms and conditions, refer to the warranty documentation included with your product or contact Weibath customer service.

10.2 Customer Support

For technical assistance, replacement parts, or any questions regarding your Weibath product, please contact our customer support team. You can find more information and contact details by visiting the official Weibath store:

Visit the Weibath Store