ANZZI SD-AZ15-01MB

ANZZI SD-AZ15-01MB 70x60-inch Framed Double Sliding Shower Door Instruction Manual

Brand: ANZZI | Model: SD-AZ15-01MB

1. Introduction and Overview

This manual provides essential information for the installation, operation, and maintenance of your ANZZI SD-AZ15-01MB Framed Double Sliding Shower Door. Designed for convenience and durability, this shower door features a double sliding mechanism, 1/4-inch ANSI-certified tempered Deco-Glass, and a Tsunami Guard water-repellent coating. Please read all instructions carefully before proceeding with installation or use.

ANZZI 70x60-inch Framed Double Sliding Shower Door in Matte Black finish, installed in a modern bathroom.

Image 1.1: ANZZI SD-AZ15-01MB Double Sliding Shower Door installed.

2. Safety Information

Always prioritize safety during installation and use. Failure to follow these instructions may result in injury or product damage.

  • Professional Installation Recommended: Due to the weight and nature of glass, professional installation is highly recommended.
  • Handle Glass with Care: Tempered glass, while strong, can shatter if struck at the edges or corners. Always wear appropriate safety gear, including gloves and eye protection.
  • Secure Mounting: Ensure all mounting hardware is securely fastened to structural elements of the wall. Do not rely solely on drywall anchors.
  • Weight: The shower door weighs approximately 100 pounds. Use proper lifting techniques and seek assistance when handling heavy components.
  • California Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

3. Package Contents

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact ANZZI customer support.

  • Glass Panels (Tempered Deco-Glass)
  • Aluminum Frame Components (Top and Bottom Rails, Wall Profiles)
  • Stainless Steel Rollers and Guides
  • Door Handles (2)
  • Screws and Wall Anchors
  • Water Sealing Strips
  • Roller Lubricant
  • Installation Hardware

4. Setup and Installation

Installation requires careful measurement and adherence to instructions. This door is designed for reversible installation, allowing for left or right-hand opening configurations.

4.1 Pre-Installation Steps

  1. Measure Opening: Accurately measure the width and height of your shower opening. The door is designed for a 70-inch height and 60-inch width.
  2. Inspect Components: Unpack all parts and inspect for any damage or missing items.
  3. Gather Tools: Ensure you have all necessary tools, including a drill, level, tape measure, screwdriver, and sealant.

4.2 Frame Assembly

Assemble the top and bottom rails with the wall profiles according to the desired left or right-hand installation. Ensure all connections are secure and level.

Diagram showing the 70-inch height and 60-inch width of the framed sliding shower door, with icons for easy glide rollers and reversible installation.

Image 4.1: Product dimensions and key installation features.

4.3 Glass Panel Installation

Carefully insert the tempered glass panels into the assembled frame. The 1/4-inch (6mm) ANSI-certified Deco-Glass provides strength and reliability.

Close-up of 1/4 inch (6mm) tempered Deco-Glass, highlighting its thickness and ANSI certification.

Image 4.2: Detail of 1/4-inch (6mm) ANSI-certified Deco-Glass.

4.4 Final Adjustments and Sealing

Install the stainless steel rollers for smooth operation. Apply water sealing strips to prevent leaks. Ensure all components are aligned and the door slides freely. If minor adjustments to the frame length are required for a precise fit, it is strongly recommended to consult a professional installer to ensure structural integrity and proper function.

5. Operation

The ANZZI SD-AZ15-01MB features a double sliding design, allowing access from either side. The stainless steel rollers ensure a smooth, quiet, and effortless opening and closing motion. Gently push or pull the handles to slide the door panels.

Close-up of matte black handles and crystal clear glass, emphasizing the finish and clarity.

Image 5.1: Matte Black finish and Crystal Clear glass detail.

6. Maintenance and Cleaning

Regular cleaning and maintenance will preserve the appearance and functionality of your shower door.

6.1 Glass Cleaning

The glass panels are treated with Tsunami Guard technology, which actively repels water and helps prevent stains, soap scum, and cloudy build-up. For routine cleaning, wipe the glass with a soft cloth and mild, non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that could damage the Tsunami Guard coating.

Comparison image showing a shower door with Tsunami Guard protection, clear and free of water spots, next to a non-protected glass door with visible water stains and build-up.

Image 6.1: Tsunami Guard technology for water stain protection.

6.2 Frame and Hardware Cleaning

Clean the matte black aluminum frame and stainless steel hardware with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish.

6.3 Roller Maintenance

Periodically apply the provided roller lubricant to the stainless steel rollers to ensure continued smooth operation. Clean any debris from the tracks to prevent obstruction.

7. Troubleshooting

Refer to the following common issues and solutions. If the problem persists, contact ANZZI customer support.

ProblemPossible CauseSolution
Door does not slide smoothlyDirty tracks; rollers need lubrication; misaligned frameClean tracks of debris. Apply roller lubricant. Check frame for level and alignment.
Water leaks from door edgesImproperly installed sealing strips; insufficient sealant; frame not levelEnsure sealing strips are correctly seated. Reapply silicone sealant where necessary. Verify frame is level.
Door feels loose or wobblyLoose mounting hardware; improper glass panel seatingTighten all mounting screws. Ensure glass panels are securely seated in their channels.

8. Specifications

FeatureDetail
BrandANZZI
Model NumberSD-AZ15-01MB
Product Dimensions0.38 x 60 x 70 inches (Depth x Width x Height)
Glass Thickness1/4 inch (6mm)
Glass TypeANSI-certified Tempered Deco-Glass
FinishMatte Black
MaterialAluminum (Frame), Stainless Steel (Rollers), Tempered Glass
Item Weight100 Pounds
Assembly RequiredYes
Number of Handles2
UPC191042074149

9. Warranty and Support

Your ANZZI SD-AZ15-01MB Shower Door is backed by a Limited Lifetime Warranty. For warranty claims, technical assistance, or to order replacement parts, please contact ANZZI customer support. Refer to the official ANZZI website or your purchase documentation for detailed warranty terms and contact information.

Customer Support: For assistance, please visit the ANZZI store on Amazon or their official website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.