Introduction
Thank you for choosing the LKE SUN S2PRO 268W UV LED Nail Lamp. This manual provides essential information for the safe and effective use of your new nail lamp. Please read it thoroughly before operation and retain it for future reference.
Image: The LKE SUN S2PRO 268W UV LED Nail Lamp, a white and black device with gold accents and a digital display, designed for curing gel nail polish.
Safety Information
- Continuous use for more than 2 hours is not recommended to prevent overheating and prolong product life.
- This product is designed for curing UV-LED gel nail polish. It is not suitable for drying regular nail polish that does not contain UV-reactive ingredients.
- Drying time depends on the UV ingredient content in the gels. Gels with higher UV content may dry faster.
- Avoid applying nail polish too thickly, as this can increase drying time and affect curing quality.
- Keep out of reach of children.
- Do not look directly into the UV/LED light during operation.
- Unplug the device when not in use or before cleaning.
Product Features
- High Power Dual Light Source: Equipped with 268W power and 57 evenly distributed UV+LED bulbs for efficient and fast gel polish curing.
- Versatile Gel Compatibility: Suitable for curing various gels including primer, topcoat, UV glue, building glue, gem glue, polyglue, and color polishing.
- Convenient Timer Settings: Features a display screen with selectable curing times of 10s, 30s, 60s, and a 99s low heat mode for temperature protection.
- Automatic Infrared Sensor: Automatically turns the light on when a hand is placed inside and off when removed, eliminating manual timer settings.
- Portable Design: Includes a portable handle for easy transport.
- Removable Bottom Plate: The base can be detached for convenient cleaning and use during pedicures.
Image: Diagram highlighting key features such as LED display, 4 timer settings, portable handle, 57 LED beads, intelligent sensor, and product dimensions (8.15in x 9.09in x 4.21in).
Setup
- Unpack the LKE SUN S2PRO Nail Lamp and its power adapter from the packaging.
- Place the nail lamp on a stable, flat surface.
- Connect the power adapter to the designated port at the back of the nail lamp.
- Plug the power adapter into a suitable electrical outlet. The digital display should illuminate, indicating the device is ready for use.
- If performing a pedicure, the bottom plate can be easily detached by gently pulling it downwards.
Image: The LKE SUN S2PRO Nail Lamp with its detachable base separated, illustrating how to prepare the device for use on toenails or for cleaning.
Operating Instructions
- Prepare your nails by applying a thin, even layer of UV-LED gel polish.
- Place your hand (or foot, if the base is detached) under the lamp. The built-in automatic infrared sensor will detect your hand and turn on the UV/LED lights.
- Select the desired curing time using the buttons on the top panel: 10s, 30s, 60s, or 99s (low heat mode). The selected time will be displayed on the screen.
- Ensure all nails are evenly exposed to the light for proper curing.
- Once the selected time has elapsed, remove your hand from the lamp. The lights will automatically turn off.
- Repeat the process for additional coats of gel polish as needed.
Image: A hand placed inside the LKE SUN S2PRO Nail Lamp, demonstrating the automatic infrared sensor activating the UV/LED lights for curing.
Maintenance
- Ensure the device is unplugged before cleaning.
- Wipe the exterior of the lamp with a soft, dry cloth.
- The detachable bottom plate can be removed for thorough cleaning to maintain hygiene, especially after pedicures.
- Do not use abrasive cleaners or solvents on any part of the device.
- Store the nail lamp in a cool, dry place when not in use.
Troubleshooting
- Lamp not turning on: Ensure the power adapter is securely plugged into both the lamp and the electrical outlet. Check if the outlet is functional.
- Gel not curing properly: Ensure the gel polish is UV-LED compatible. Apply thin coats. Increase curing time if necessary. Ensure nails are positioned correctly under the lights.
- Automatic sensor not responding: Ensure there are no obstructions blocking the sensor. Reposition your hand to fully activate the sensor.
- If issues persist, please refer to the customer support information below.
Specifications
| Brand | LKE |
| Model Number | SUN S2PRO |
| Power | 268W |
| Lamp Beads | 57 Pcs (UV+LED) |
| Timer Settings | 10s, 30s, 60s, 99s (Low Heat Mode) |
| Product Dimensions | 8.15 x 9.09 x 4.69 inches |
| Item Weight | 1.17 Pounds |
| Material | Plastic |
| Color | White |
Warranty and Support
Your satisfaction is our priority. If you encounter any quality issues with your LKE SUN S2PRO Nail Lamp, please do not hesitate to reach out to us. We provide prompt and responsive customer service, aiming to resolve any problems within 24 hours.
For support, please contact LKE customer service through the retailer's platform where the product was purchased.