BOSSIN Flat Shape Chicken Coop-23
BOSSIN Metal Chicken Coop Instruction Manual
Model: Flat Shape Chicken Coop-23
Introduction
The BOSSIN Metal Chicken Coop with Waterproof Cover is designed to provide a secure and spacious enclosure for poultry and other small animals. This walk-in, heavy-duty coop features a rust-proof steel structure, PVC-coated hexagonal wire mesh, and a waterproof, UV-resistant cover, offering protection against various weather conditions. Its design prioritizes durability, ease of assembly, and animal safety.
Image: Fully assembled BOSSIN Metal Chicken Coop, showcasing its flat roof design and spacious interior.
Product Features
- Upgraded Rust-proof and Durable Steel Structure: Constructed with a high-quality steel pipe frame and galvanized technology to prevent rust. The 1-inch diameter steel pipes are reinforced for stability in windy and rainy conditions.
- PVC Coated Hexagonal Wire Mesh: The coop walls are made from durable PVC-coated hexagonal wire mesh, designed to be solid and prevent damage. Small gaps in the mesh enhance safety by preventing predators and avoiding animal entrapment.
- Safety Lockable Steel Door Design: Features a galvanized door with a secure locking mechanism to ensure animals remain safely inside.
- Water and UV-Resistant Cover: A durable cover protects poultry from adverse weather and harmful UV rays.
Image: The chicken coop with an overlay highlighting its UV protection and waterproof features, demonstrating its suitability for outdoor use.
Setup and Assembly
Assembly of the BOSSIN Metal Chicken Coop is designed to be straightforward. Detailed installation instructions are included with the product. The connecting parts have been optimized to simplify the process and reduce assembly time.
Key Assembly Steps and Components:
- Frame Assembly: Connect the steel pipes according to the provided diagrams. Ensure all connections are secure.
- Door Installation: The door and doorframe assembly requires careful attention. Ensure the lockable galvanized door is properly aligned and secured.
- Wire Mesh Attachment: Attach the PVC-coated hexagonal wire mesh to the frame. Use the provided cable ties or securing mechanisms to ensure the mesh is taut and fully covers all open sides.
- Cover Installation: Secure the waterproof and UV-resistant cover to the top of the frame using the rubber ropes provided. Ensure the cover is stretched to prevent water pooling, especially on flat roof models.
- Ground Pegs: Utilize the included ground pegs to anchor the coop securely to the ground, enhancing stability.
Image: Detailed view of key components including the rubber rope for cover connection, connectors for steel pipes, and the hexagonal net with top cloth for weather protection.
Image: Close-up of the winding wire net designed to prevent pecking and escaping, and the sturdy base construction with ground pegs for stability.
Operating Instructions
The BOSSIN Metal Chicken Coop provides a safe and spacious environment for various small animals. It is designed for outdoor use.
Usage Guidelines:
- Animal Compatibility: Suitable for chickens, ducks, geese, rabbits, and other similar-sized poultry or small animals.
- Door Operation: Use the lockable steel door for secure entry and exit. Always ensure the door is properly latched to prevent animals from escaping and to deter predators.
- Space Utilization: The coop offers ample space for animals to move freely. Consider the number of animals to ensure adequate room for comfort and health.
Image: The coop is suitable for various cultured species, including chickens, ducks, geese, and rabbits, providing a versatile breeding and living space.
Maintenance
Regular maintenance will extend the lifespan of your BOSSIN Metal Chicken Coop and ensure a safe environment for your animals.
Care Instructions:
- Cleaning: The manufacturer recommends hand washing for cleaning. Regularly clean the interior and exterior of the coop to maintain hygiene.
- Frame Inspection: Periodically check the steel frame for any signs of damage or loose connections. Although rust-proof, extreme conditions may cause wear over time.
- Wire Mesh Inspection: Inspect the PVC-coated hexagonal wire mesh for any tears or damage that could compromise animal safety or allow predator entry. Repair or replace damaged sections promptly.
- Cover Maintenance: Ensure the waterproof cover remains taut to prevent water pooling, especially during heavy rain or snow. Clear any debris from the cover regularly.
- Door Mechanism: Lubricate the door hinges and locking mechanism as needed to ensure smooth operation.
Troubleshooting
This section addresses common issues that may arise during the use of your chicken coop.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water pooling on roof cover | Cover not taut enough or improper installation. | Ensure the cover is stretched tightly and secured with all rubber ropes. Adjust tension as needed. For flat roof models, manually clear accumulated water during heavy rainfall. |
| Door not closing/latching properly | Misalignment of door frame or latch mechanism. | Check the alignment of the door and its frame. Adjust the position of the bar above the door if necessary to ensure proper clearance. Lubricate the latch. |
| Wire mesh appears flimsy or insecure | Insufficient cable ties or improper attachment. | Ensure a sufficient number of cable ties are used to secure the wire mesh to the frame, making it taut. For enhanced predator resistance, consider adding additional, sturdier wire mesh or rabbit fencing around the base. |
| Coop instability in wind | Insufficient anchoring or extreme weather. | Verify that all ground pegs are fully inserted and secure. For areas prone to high winds, consider additional anchoring methods or reinforcing the base. |
Image: Instructions on how to adjust the clearance of the coop door by modifying the position of the bar above the door.
Specifications
| Attribute | Detail |
|---|---|
| Model Name | Flat Shape Chicken Coop-23 |
| Dimensions (L x W x H) | 73.2"L x 112.2"W x 74.8"H (185.9 cm x 284.9 cm x 190 cm) |
| Item Weight | 62 Pounds (28.1 kg) |
| Material | Galvanized Metal Frame, PVC Coated Hexagonal Wire Mesh |
| Cover Material | Water and UV-resistant fabric |
| Color | Silver |
| Target Audience | Ducks, Chickens, other poultry and small animals |
| Specific Uses | Outdoor Poultry Habitat |
| Included Components | Stand, Frame components, Wire Mesh, Cover, Hardware |
Image: Product dimensions diagram, indicating the length, width, and height of the coop, and suggesting space for 15-20 chickens.
Warranty and Support
The BOSSIN Metal Chicken Coop comes with a 1-year manufacturer warranty.
For any questions, concerns, or support needs regarding your product, please contact BOSSIN customer service. Refer to the contact information provided in your product packaging or visit the official BOSSIN store online.
You can visit the BOSSIN Store for more information: BOSSIN Official Store
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.