Boulder BL-F200AZ Fresnel LED 200W 2-in-1 Stage Light Instruction Manual

Product Overview

The Boulder BL-F200AZ Fresnel LED 200W 2-in-1 Stage Light is a high-definition studio spot lighting system designed for professional stage and event applications. It features a powerful 200W LED light source with adjustable warm white and cool white temperatures, motorized linear zoom, and versatile control options.

Key Features:

• 200W 2-in-1 LEDs (Cool White + Warm White)
• Motorized linear zoom from 15° to 50°
• 50,000 hours lifespan and low power consumption
• High efficiency Fresnel Lens
• 0-100% smooth and precise linear dimmer
• Rugged, die-cast aluminum alloy housing
• Barn doors included for light shaping
• 25T/sec high-speed shutter/strobe effect with variable speed
• Preset variable/random strobe and dimming pulse effect
• 2 DMX channel modes (4CH/6CH)
• DMX512, master-slave, sound activated, or auto operation control
• 4-button LCD display for easy navigation
• Lower noise and efficient FAN cooling system
• Powercon IN/OUT and 3-pin DMX connectors IN/OUT
• Color temperature adjustable from 3200K to 5600K
• Color Rendering Index (CRI) ≥90
• IP20 protection rating

What's in the Box

• Stage light with barn door
• Power cable
• Signal cable

Figure 1: Power cable (top) and DMX signal cable (bottom) included with the stage light.

Setup

1. Unpacking: Carefully remove the stage light and all accessories from the packaging. Inspect for any damage during transit.
2. Mounting:
   • The fixture includes a hanging bracket for truss mounting or can be used as a floor stand.
   • Securely attach the light to a truss using appropriate clamps (not included) through the designated hole on the bracket.
   • For floor use, position the light on a stable, flat surface using the adjustable bracket.
   

   Figure 2: Side view of the stage light, showing the adjustable mounting bracket for versatile positioning.
   

   Figure 3: Another side view illustrating the barn doors and the adjustable bracket.

3. Power Connection: Connect the provided power cable to the "POWER IN" port on the rear of the fixture. Plug the other end into a grounded power outlet.
   

   Figure 4: Rear panel showing the Power In/Out and DMX In/Out ports, along with the control buttons and LED display.

4. DMX Connection (Optional): For DMX control, connect a 3-pin DMX cable from your DMX controller to the "DMX IN" port. If linking multiple fixtures, connect from "DMX OUT" of the first fixture to "DMX IN" of the next.
5. Barn Doors: Adjust the barn doors to shape the light beam as desired. They can be closed for transport or to restrict light spill.
   

   Figure 5: Front view of the stage light with its barn doors fully open, ready to direct light.

Operating Instructions

Control Panel Navigation:

The fixture features a 4-button LCD display on the rear panel for direct control and DMX address setting.

• MENU: Cycles through the main menu options.
• UP: Increases the value or navigates up through menu options.
• DOWN: Decreases the value or navigates down through menu options.
• ENTER: Confirms the selection or enters a submenu.

Menu Functions and Descriptions:

Figure 6: Detailed DMX Channel Table and Menu Function Operation for the stage light.

DMX Channel Table:

Demonstration Videos:

Maintenance

• Cleaning: Regularly clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Ventilation: Ensure the fixture has adequate ventilation to prevent overheating. Do not block the cooling vents.
• Storage: Store the fixture in a dry, dust-free environment when not in use.
• Inspection: Periodically check all cables and connections for signs of wear or damage.

Troubleshooting

• No Power:
  • Check if the power cable is securely connected to both the fixture and the power outlet.
  • Verify that the power outlet is functional.
• No Light Output:
  • Ensure the dimmer setting is not at 0%.
  • Check DMX connections and address settings if using a controller.
• Incorrect DMX Control:
  • Verify the DMX address on the fixture matches your controller's settings.
  • Check DMX cable integrity and connections.
  • Ensure the correct DMX channel mode (4CH or 6CH) is selected.
• Overheating:
  • Ensure proper ventilation around the fixture.
  • Do not operate in ambient temperatures exceeding 45°C.

Specifications

Figure 7: Technical drawing illustrating the dimensions of the Boulder BL-F200AZ stage light.

Warranty and Support

This product comes with a 2-Year Warranty. If any quality problems occur within 2 years from the date of purchase, brand new items will be sent for free or a full refund will be provided.

Additionally, a 30-Days Full Refund Guarantee is offered. If you are not completely satisfied or the item isn't what you expected, simply inform us within 30 days for a full refund unconditionally.

For any inquiries or support, please contact customer service. Quick responses are provided within 12 hours. Providing a video or pictures of any issues can help expedite the support process.