Marantz Cinema 60 7.2 Channel AV Receiver

1. Introduction

This manual provides detailed instructions for the proper setup, operation, and maintenance of your Marantz Cinema 60 7.2 Channel AV Receiver. The Cinema 60 is designed to deliver a premium home theater experience with 100 watts per channel amplification, supporting advanced audio formats like Dolby Atmos and DTS:X, and video technologies such as 8K Ultra HD. It also features HEOS built-in for streaming capabilities. Please read this manual thoroughly before using the product to ensure safe and optimal performance.

2. Setup

Follow these steps to set up your Marantz Cinema 60 AV Receiver.

2.1 Unpacking and Placement

• Carefully remove the receiver from its packaging.
• Place the receiver on a stable, level surface with adequate ventilation. Ensure there is sufficient space around the unit for heat dissipation.
• Keep the receiver away from direct sunlight, heat sources, and moisture.

2.2 Rear Panel Connections Overview

The rear panel of the Marantz Cinema 60 features various input and output terminals. Refer to the image below for a visual guide to the connections.

Figure 2.2.1: Rear Panel Connections of the Marantz Cinema 60. This image displays the comprehensive array of ports including HDMI inputs/outputs, speaker terminals for 7.2 channels, digital and analog audio inputs, network port, and antenna connections for FM/AM and Bluetooth/Wi-Fi.

2.3 Speaker Connections

The Cinema 60 supports a 7.2 channel speaker configuration. Connect your speakers to the corresponding terminals on the rear panel.

• Front Speakers (L/R): Connect to the "FRONT L" and "FRONT R" terminals.
• Center Speaker: Connect to the "CENTER" terminal.
• Surround Speakers (L/R): Connect to the "SURROUND L" and "SURROUND R" terminals.
• Surround Back Speakers (L/R): Connect to the "SURROUND BACK L" and "SURROUND BACK R" terminals.
• Subwoofers: Connect to the "PRE OUT" subwoofer outputs (SW1, SW2) using RCA cables.
• Ensure correct polarity (+ to + and - to -) for all speaker connections. The impedance range for speakers is 4-16 ohms.

2.4 HDMI Connections

Connect your video sources (Blu-ray player, game console, media player) to the HDMI IN ports and your TV/projector to the HDMI OUT (MONITOR) ports.

• The receiver features multiple HDMI IN ports (e.g., MEDIA PLAYER, GAME, AUX1, AUX2) and two HDMI OUT ports (MONITOR 1, MONITOR 2).
• Ensure you use high-speed HDMI cables for 8K Ultra HD and other advanced video formats.

2.5 Audio Connections

• Digital Audio: Use COAXIAL or OPTICAL DIGITAL AUDIO IN ports for devices like CD players or set-top boxes.
• Analog Audio: Use the AUDIO IN RCA ports for analog sources.
• Phono Input: Connect a turntable to the PHONO input if available (check specific model features).

2.6 Network and Antenna Connections

• Network: Connect an Ethernet cable to the NETWORK port for a wired internet connection, or attach the supplied Bluetooth/Wi-Fi antennas for wireless connectivity.
• FM/AM Antenna: Connect the supplied FM and AM antennas to their respective terminals for radio reception.

2.7 Power Connection

• After all other connections are made, connect the power cord to the AC IN socket on the rear panel and then to a wall outlet.

3. Operating Instructions

This section covers the basic operation of your Marantz Cinema 60 AV Receiver.

3.1 Powering On/Off

• Press the POWER button on the front panel or the remote control to turn the unit on or off.

3.2 Input Selection

• Use the INPUT SELECTOR buttons on the front panel or the remote control to switch between connected sources (e.g., HDMI 1, CD, Network).

3.3 Volume Control

• Adjust the volume using the large VOLUME knob on the front panel or the VOLUME +/- buttons on the remote control.

3.4 Audio Modes and Surround Sound

• The Cinema 60 supports various audio formats including Dolby Atmos and DTS:X. The receiver will automatically detect and decode the incoming audio signal.
• You can manually select different surround sound modes using the MODE buttons on the remote control to optimize your listening experience.
• Audyssey room correction technology is integrated to optimize sound performance for your specific room acoustics.

3.5 Video Features

• The receiver supports 8K Ultra HD video pass-through. Ensure your display and source devices are also 8K compatible for full resolution.
• It is compatible with Dolby Vision and HDR10+ for enhanced picture quality.

3.6 HEOS Built-in Streaming

• Utilize the HEOS app on your smartphone or tablet to access music streaming services, internet radio, and music stored on your local network.
• The HEOS system allows for multi-room audio playback with other HEOS-enabled devices.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your receiver.

4.1 Cleaning

• Disconnect the power cord before cleaning.
• Use a soft, dry cloth to wipe the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents.
• Periodically clean the ventilation openings to prevent dust buildup, which can affect performance and lead to overheating.

4.2 Firmware Updates

• Marantz may release firmware updates to improve performance or add new features.
• Connect the receiver to the internet (wired or Wi-Fi) and check for updates via the setup menu. Follow the on-screen instructions carefully.

5. Troubleshooting

If you encounter issues with your Marantz Cinema 60, refer to the following common problems and solutions.

5.1 No Power

• Ensure the power cord is securely connected to both the receiver and a working wall outlet.
• Check if the power outlet is functional by plugging in another device.

5.2 No Sound

• Verify that the correct input source is selected.
• Check speaker connections for proper polarity and secure fit.
• Ensure the volume is not set to minimum or muted.
• Confirm that your speakers are powered on if they are active speakers.

5.3 No Video Output

• Ensure the HDMI cables are securely connected between the source, receiver, and display.
• Verify that the correct HDMI input is selected on the receiver and the correct input is selected on your TV/projector.
• Try a different HDMI cable or port.

5.4 Network Connection Issues

• For wired connections, ensure the Ethernet cable is properly connected to both the receiver and your router.
• For Wi-Fi, ensure the antennas are attached and the Wi-Fi settings are correctly configured in the receiver's setup menu.
• Restart your router and modem.

WARNING: SHOCK HAZARD - DO NOT OPEN. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.

6. Specifications

7. Warranty & Support

Marantz products are built to high quality standards and come with a limited warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions applicable to your region.

For technical support, service, or further assistance, please visit the official Marantz website or contact your local authorized Marantz dealer. You can find contact information and support resources at: www.marantz.com/en-us/support