Britta Products SNL-003 PRO Series Solar LED Dock Barge Boat Safety Warning Light Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Britta Products SNL-003 PRO Series Solar LED Dock Barge Boat Safety Warning Light. This device is designed to offer reliable all-night performance with adjustable flash rates, suitable for various marine and safety applications.

Image 1.1: The Britta Products SNL-003 PRO Series Solar LED Dock Barge Boat Safety Warning Light (Green LED variant).

2. Key Features

• Super bright 2 NM visibility. Select either constant on or flashing pattern (adjustable).
• Large ANGLED solar panel and internal battery. Flash pattern internally adjustable (10x, 20x, 30x or 45x per minute).
• Angled solar panel captures more sunshine - for improved all-night performance.
• Waterproof design - ideal for docks and maritime use.
• High capacity 2400mAH replaceable battery.
• Anti-UV polycarbonate shell for longevity.
• Color-coordinated reflective tape on the lamp base for added visibility.
• Easy flange mounting or optional metal mounting stands and magnetic base mount.

Image 2.1: Product dimensions and highlighted features, including angled solar panel, high-performance internal battery, waterproof design, constant-on and adjustable flash rate, and optional mounting bases.

3. Setup and Installation

The Britta Products SNL-003 PRO Series light comes ready-to-install with no assembly required. Follow these steps for optimal performance:

1. Unpacking: Carefully remove the light from its packaging.
2. Initial Charge: Place the light in direct sunlight for at least 8-10 hours before first use to ensure the internal battery is fully charged.
3. Mounting Location: Choose a location that receives maximum direct sunlight throughout the day. Ensure the angled solar panel is oriented to capture the most sunlight. Avoid shaded areas.
4. Mounting:
   • The light features an easy flange mounting system. Secure the base using appropriate fasteners (not included) for your surface (e.g., wood, concrete).
   • Optional metal mounting stands (6" or 12") or magnetic base mounts are available for purchase separately. These provide elevated or temporary mounting solutions.

Image 3.1: The SNL-003 PRO Series lamp shown with an optional 6-inch metal mounting base, installed on a dock.

Image 3.2: The SNL-003 PRO Series lamp shown with an optional 12-inch metal mounting base, installed on a dock.

Image 3.3: Illustration of the angled solar panel design, which optimizes charging performance in both summer and winter, and during periods of poor weather.

4. Operating Instructions

The SNL-003 PRO Series light automatically activates at dusk and deactivates at dawn. You can select between constant-on mode or various flashing patterns.

1. Mode Selection: The mode is selected via a waterproof push button located on the lamp's underside.
2. Adjusting Flash Rate: The flash pattern is internally adjustable. To change the flash rate, you will need to access the internal components.
   • The available flash rates are 10x, 20x, 30x, or 45x per minute.
   • Refer to the internal switch settings for specific configurations (see Image 4.1).
3. Constant-On Mode: This mode provides a continuous light output without flashing.

Image 4.1: Internal view of the light, showing the circuit board with switches for adjusting flash patterns and the replaceable battery.

For a visual introduction to the product and its features, please watch the official product video below:

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar light.

• Cleaning: Periodically clean the solar panel and the light's lens with a soft, damp cloth to remove dust, dirt, and debris. A clean solar panel ensures efficient charging.
• Battery Replacement: The light uses a high-capacity 2400mAH replaceable battery. If the light's performance diminishes significantly over time (e.g., shorter illumination duration), the battery may need replacement. Refer to Image 4.1 for battery location. Use only compatible replacement batteries.
• Inspection: Regularly inspect the light for any physical damage or loose connections, especially after severe weather conditions.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the Britta Products official website or contact their customer service directly. Contact details are typically provided with your purchase documentation or on the manufacturer's website.

You can also visit the Britta Products Store on Amazon for additional product information and support resources.