Introduction
Thank you for purchasing the DOSS 4-in-1 Cell Phone Stand. This device integrates a cell phone stand, Bluetooth speaker, 15W wireless charger, and conference microphone into a single portable unit. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your product. Please read this manual thoroughly before use and retain it for future reference.
Package Contents
- DOSS 4-in-1 Cell Phone Stand
- USB Charging Cable
- Travel Case
- User Manual
Product Overview
Product Layout
The DOSS 4-in-1 Cell Phone Stand is designed for versatility and ease of use. Below is an image illustrating the main components of the device.
Image: The DOSS 4-in-1 Cell Phone Stand in black, featuring an adjustable phone holder, integrated Bluetooth speaker, and control buttons on the base. A smartphone is shown mounted on the stand, displaying a music player interface.
Controls and Indicators
Familiarize yourself with the control buttons and indicators on your device.
Image: A diagram of the DOSS 4-in-1 Cell Phone Stand, highlighting its various control buttons and ports with corresponding numbers for identification.
| No. | Button/Port | Function |
|---|---|---|
| 1 | Power Button | Turn on/off, Reject a call, Answer/End a call |
| 2 | Volume Down / Previous Track | Decrease volume, Go to previous track |
| 3 | Volume Up / Next Track | Increase volume, Skip to next track |
| 4 | Play/Pause Button | Play/Pause music, Disconnect/Reconnect Bluetooth |
| 5 | Microphone On/Off | Toggle microphone on or off |
| 6 | Charging Port | Connect power adapter to charge the speakerphone |
Setup
Initial Charging
Before first use, fully charge the device. Connect the supplied USB charging cable to the charging port (6) on the device and to a compatible USB power adapter (not included). The charging indicator light will be solid red during charging and will turn off once fully charged. A full charge typically takes approximately 2.5 hours.
Powering On/Off
- To Power On: Press and hold the Power Button (1) for 2-3 seconds until you hear an audible prompt and the indicator light illuminates.
- To Power Off: Press and hold the Power Button (1) for 2-3 seconds until you hear an audible prompt and the indicator light turns off.
Operating Instructions
Bluetooth Pairing
To connect your device via Bluetooth:
- Ensure the DOSS 4-in-1 Cell Phone Stand is powered on. The Bluetooth indicator light will blink blue, indicating it is in pairing mode.
- On your smartphone or tablet, navigate to the Bluetooth settings.
- Select "DOSS 4-in-1 Stand" from the list of available devices.
- Once successfully paired, you will hear a musical sound effect, and the Bluetooth indicator light will turn solid blue.
- To disconnect, press the Play/Pause Button (4) or disconnect from your device's Bluetooth settings. To reconnect, press the Play/Pause Button (4) again.
Wireless Charging Function
The device features a 15W wireless charging pad compatible with Qi-enabled devices.
- Ensure the DOSS 4-in-1 Cell Phone Stand is connected to a power outlet via its charging port (6) for the wireless charging function to operate.
- Place your Qi-compatible smartphone or tablet horizontally on the designated wireless charging area of the stand.
- The device's charging indicator will show that charging has begun.
- Note: Some larger phones (e.g., iPhone 12 mini, iPhone 12 Pro Max) may need to be placed sideways for optimal charging alignment.
Image: A smartphone placed on the DOSS 4-in-1 Cell Phone Stand, displaying a charging icon and battery percentage, indicating active wireless charging.
Adjusting the Phone Stand
The flexible stretch bracket allows for multiple viewing angles.
- Gently adjust the phone holder bracket to your desired angle. The stand is designed to securely hold most mobile phones, tablets, and e-readers.
- The stand features anti-slip rubber padding on the back of the holder and small rubber feet on the base to prevent movement and protect your device.
Image: A visual representation of the DOSS 4-in-1 Cell Phone Stand's adjustable angle feature, with arrows indicating movement. Insets show the anti-slip rubber padding on the phone rest and the anti-slip rubber feet on the base.
Call Management
When connected via Bluetooth, you can manage calls directly from the device:
- Answer/End Call: Short press the Power Button (1).
- Reject Call: Press and hold the Power Button (1) for 2 seconds.
- Microphone On/Off: Use the Microphone On/Off button (5) to mute or unmute the built-in microphone during calls or conferences.
Audio Playback
Control your music when connected via Bluetooth:
- Play/Pause: Short press the Play/Pause Button (4).
- Volume Up: Short press the Volume Up button (3).
- Volume Down: Short press the Volume Down button (2).
- Next Track: Press and hold the Volume Up button (3).
- Previous Track: Press and hold the Volume Down button (2).
Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the device in its supplied travel case in a cool, dry place.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in constant use.
- Avoid Extreme Conditions: Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery. | Charge the device fully using the supplied USB cable. |
| Cannot pair via Bluetooth. | Device not in pairing mode; Bluetooth disabled on source device; too far from source device. | Ensure the device is powered on and the Bluetooth indicator is blinking blue. Enable Bluetooth on your phone/tablet. Move the devices closer. |
| No sound from speaker. | Volume too low; device not connected; audio source paused. | Increase volume on both the stand and your connected device. Verify Bluetooth connection. Ensure audio is playing on your source device. |
| Wireless charging not working. | Device not plugged into wall charger; phone not Qi-compatible; phone misaligned; phone case too thick. | Ensure the stand is connected to a power outlet. Verify your phone supports Qi wireless charging. Adjust phone position on the charging pad. Remove thick phone cases. |
| Phone stand is unstable. | Phone too heavy or improperly placed. | Ensure the phone is centered and securely placed on the holder. Adjust the angle carefully. |
Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 2 x 1.3 x 4 inches |
| Item Weight | 1.61 pounds |
| Battery | 1 Lithium Polymer battery (included) |
| Playtime | Up to 8 hours |
| Wireless Charging Output | 15W |
| Bluetooth Version | V5.0 |
| Compatibility | Most mobile phones, tablets, e-readers (Qi-compatible for wireless charging) |
Warranty and Support
DOSS products are backed by a 12-month warranty from the date of purchase, covering any quality-related concerns.
For technical support, warranty claims, or any product-related inquiries, please contact us:
- Phone: 1-833-275-3677
- Email: support@dossav.com
We are committed to providing you with 24-hour prompt assistance and support.
Image: A customer support representative wearing a headset, with the DOSS support phone number (1-833-275-3677) and email (support@dossav.com) displayed, emphasizing 24-hour assistance and a one-year warranty.