1. Introduction
Thank you for purchasing the Audiobox 1953 Chevy 3100 Pickup Truck Replica Bluetooth Speaker. This device combines vintage aesthetics with modern audio technology, offering multiple playback options including Bluetooth, AUX-in, USB, TF Card, and FM radio. Please read this manual carefully to ensure proper use and optimal performance of your speaker.
2. Package Contents
Verify that all items are present in your package:
- Audiobox 1953 Chevy 3100 Pickup Truck Replica Bluetooth Speaker
- USB Charging Cable
- User Manual (this document)
3. Product Overview
The Audiobox TRK speaker is designed to resemble a classic 1953 Chevy 3100 pickup truck, featuring functional LED lights and various audio input options.
Figure 3.1: Front 3/4 view of the Audiobox TRK Bluetooth Speaker.
Figure 3.2: Rear view displaying the various input ports.
Figure 3.3: Labeled controls and ports for easy identification.
3.1. Controls and Ports
- Power Button (⑂): Press and hold to turn the speaker on or off.
- Mode/Source Button (M): Short press to switch between Bluetooth, FM, AUX, USB, and TF card modes.
- Play/Pause Button (▶▶): Play or pause audio. In FM mode, press and hold to auto-scan stations.
- Previous Track/Volume Down (-VOL ◀◀): Short press for previous track. Press and hold to decrease volume.
- Next Track/Volume Up (+VOL ▶▶): Short press for next track. Press and hold to increase volume.
- DC 5V Port: For charging the speaker using the provided USB cable.
- AUX Input: 3.5mm jack for connecting external audio devices.
- USB Port: For playing audio from a USB flash drive.
- TF Card Slot: For playing audio from a TF (MicroSD) card.
- Display: Shows current mode and track information.
- Tail Lights: Functional LED lights.
3.2. Product Demonstration Video
Video 3.1: A demonstration of the Audiobox TRK speaker, showcasing its LED lights and sound activation. This video is provided by the manufacturer, General Sound Co.
4. Setup
4.1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB charging cable to the DC 5V port on the rear of the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator (if present) will illuminate during charging and turn off when fully charged.
4.2. Powering On/Off
Press and hold the Power button (⑂) located on the rear of the speaker for approximately 3 seconds to turn the speaker on or off. A startup sound will indicate the speaker is active.
5. Operating Instructions
5.1. Mode Selection
Short press the Mode/Source button (M) to cycle through the available audio input modes: Bluetooth, FM Radio, AUX Input, USB Playback, and TF Card Playback. The display will indicate the current mode.
5.2. Bluetooth Pairing
- Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a voice prompt and a flashing Bluetooth icon on the display.
- Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
- Search for available Bluetooth devices and select "Audiobox TRK" from the list.
- Once connected, a confirmation voice prompt will sound, and the Bluetooth icon will stop flashing. You can now play audio from your device through the speaker.
5.3. True Wireless Stereo (TWS) Pairing (Optional)
If you have two Audiobox TRK speakers, you can pair them together for a stereo sound experience:
- Ensure both speakers are powered on and in Bluetooth mode, but not yet connected to any device.
- On one of the speakers (this will be the primary speaker), press and hold the Play/Pause button (▶▶) for a few seconds until you hear a pairing tone.
- The two speakers will automatically connect to each other. A confirmation tone will sound once TWS pairing is successful.
- Now, connect your mobile device to the primary speaker via Bluetooth as described in section 5.2. Audio will play in stereo through both speakers.
5.4. USB/TF Card Playback
Insert a USB flash drive or a TF (MicroSD) card into the respective port on the rear of the speaker. The speaker will automatically switch to USB or TF card mode and begin playing audio files (MP3, WAV, etc.) stored on the device. Use the Previous/Next Track buttons to navigate and the Play/Pause button to control playback.
5.5. FM Radio
- Switch the speaker to FM radio mode using the Mode/Source button (M).
- Press and hold the Play/Pause button (▶▶) to initiate an automatic scan for FM stations. The speaker will save all found stations.
- Use the Previous/Next Track buttons to cycle through the saved FM stations.
5.6. AUX Input
Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker and the other end to the audio output jack of your external device (e.g., MP3 player, laptop). Switch the speaker to AUX mode using the Mode/Source button (M). Audio will play from your connected device.
5.7. Volume Control
Press and hold the +VOL ▶▶ button to increase the volume. Press and hold the -VOL ◀◀ button to decrease the volume.
5.8. LED Lights
The speaker features integrated LED lights. There is a dedicated ON/OFF switch for these lights, typically located near the main controls or on the underside of the speaker. Refer to Figure 3.3 for exact location if needed.
6. Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in active use.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is depleted. | Charge the speaker fully. |
| No sound. | Volume is too low or muted. Incorrect mode selected. | Increase volume. Ensure correct input mode (Bluetooth, AUX, USB, TF, FM) is selected. |
| Cannot pair via Bluetooth. | Speaker is not in pairing mode. Device is too far. Interference. | Ensure speaker is in Bluetooth pairing mode. Move device closer to speaker. Turn off other Bluetooth devices. |
| FM radio reception is poor. | Weak signal. | Relocate the speaker to an area with better reception. |
| USB/TF card not playing. | Unsupported file format. Card/drive not inserted correctly. | Ensure audio files are in a supported format (e.g., MP3, WAV). Reinsert the USB drive or TF card. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Name | TRK |
| Speaker Type | Bluetooth Speaker |
| Connectivity Technology | Bluetooth |
| Wireless Communication | Bluetooth |
| Audio Output Mode | Stereo |
| Power Source | Battery Powered |
| Speaker Size | 3 Inches |
| Product Dimensions | 5"D x 13"W x 5"H |
| Item Weight | 1.58 pounds (0.72 Kilograms) |
| Color | Black |
| Material | Metal, Plastic |
| Control Method | Remote (implied by data, but physical buttons are primary) |
| Compatible Devices | Laptop, MP3 Player, Smartphone, Tablet |
| Included Components | Speaker, USB cable, User manual |
9. Safety Information
- Do not expose the speaker to water or excessive moisture. This product is not waterproof.
- Avoid extreme temperatures, direct sunlight, and dusty environments.
- Do not disassemble, repair, or modify the speaker yourself. This may void the warranty and cause damage.
- Keep out of reach of children.
- Use only the provided USB cable for charging.
- Dispose of the product and its battery responsibly according to local regulations.
10. Warranty and Support
The Audiobox 1953 Chevy 3100 Pickup Truck Replica Bluetooth Speaker comes with a limited warranty. For specific warranty details, please refer to the warranty card included in your package or contact Audiobox customer support.
For technical support or inquiries, please visit the Audiobox Store on Amazon or consult your retailer.