Product Overview
This Azwok replacement remote control, model AU-UV002-DS, is designed to function as a direct replacement for various Dick Smith LED LCD TV models. It replicates the major buttons and functions of the original remote, providing a seamless user experience without the need for complex programming.
Image: Front view of the Azwok replacement remote control, showing all buttons and its ergonomic design.
Setup
The Azwok replacement remote control is designed for immediate use. No programming or pairing is required. Simply install the batteries, and the remote will be ready to operate your compatible Dick Smith TV.
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery cover downwards or press the latch and lift to open.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery cover by sliding it back into place until it clicks securely.
Image: Back view of the remote control with the battery cover removed, showing the empty battery compartment ready for AAA batteries.
Operation
Once batteries are installed, point the remote control towards your Dick Smith LED LCD TV and begin using it. All standard functions such as power on/off, volume control, channel changing, menu navigation, and input selection will operate as they did with your original remote.
Key Functions
- Power Button: Turns the TV on or off.
- Mute Button: Mutes or unmutes the TV audio.
- Number Buttons (0-9): Directly select channels.
- Volume Up/Down (+/-): Adjusts the TV volume.
- Channel Up/Down (+/-): Changes TV channels sequentially.
- Navigation Buttons (Up, Down, Left, Right, OK): Used for menu navigation and selection.
- Menu/Info Button: Accesses the TV's main menu or displays information.
- Exit Button: Exits current menu or on-screen display.
Compatible Models
This replacement remote control is compatible with a wide range of Dick Smith LED LCD TV models. Please verify your TV model number against the list below to ensure compatibility:
- GE6800
- GE6817
- GE6820
- GE6823
- GE6826
- GE6827
- GE6831
- GE6832
- GE6833
- GE6834
- GE6835
- GE6839
- GE6840
- GE6841
- GE6842
- GE6843
- GE6844
- GE6845
- GE6870
- GE6871
- GE6872
- GE6873
- GE6874
- GE6875
- GE6876
- GE6877
- GE6878
- GE6880
- GE6922
- GE6923
- GE6924
- GE6925
- GE6930
- GE6932
- GE6933
- GE6976
- GE6980
- GE6981
- GE6982
- GE6983
- GE6985
- GE6987
- GE6989
- GE6991
- GE6992
- GE6993
- GE6994
- GE7100
- GE7101
- GE7102
- GE7103
- GE7104
- GE7105
- GE7120
- GE7121
- GE7123
If your TV model is not listed, or if you are unsure about compatibility, please contact the manufacturer for assistance.
Maintenance
To ensure the longevity and optimal performance of your remote control, follow these simple maintenance guidelines:
- Cleaning: Wipe the remote control periodically with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials.
- Battery Replacement: Replace batteries when the remote's response becomes sluggish or it stops functioning. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: Store the remote in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Avoid Drops: Protect the remote from physical impact, as drops can damage internal components.
Troubleshooting
If you encounter issues with your Azwok replacement remote control, try the following troubleshooting steps:
- Remote Not Responding:
- Check if the batteries are inserted correctly with the correct polarity (+/-).
- Replace old batteries with new AAA batteries.
- Ensure there are no obstructions between the remote control and the TV's infrared sensor.
- Confirm you are within the effective operating range of the TV.
- Specific Buttons Not Working:
- Clean around the button to ensure no debris is preventing it from pressing fully.
- If only a few buttons are unresponsive after trying new batteries, the remote may be defective.
- TV Not Responding to Any Remote:
- Ensure the TV itself is powered on and not in standby mode.
- Try operating the TV using its physical buttons to rule out a TV issue.
If the problem persists after attempting these steps, please refer to the Warranty and Support section for further assistance.
Specifications
| Feature | Detail |
|---|---|
| Model Number | AU-UV002-DS |
| Product Dimensions | 6.89 x 1.77 x 0.59 inches |
| Item Weight | 1.76 ounces |
| Batteries Required | 2 x AAA (not included) |
| Connectivity Technology | Infrared |
| Special Feature | No programming required |
| Max Number of Supported Devices | 1 (Television) |
| Manufacturer | Azwok |
| Country of Origin | China |
Warranty and Support
This Azwok replacement remote control comes with a 12-month warranty. If the product is found to be defective or does not work with your compatible device, returns are accepted for refund or exchange.
For any inquiries, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or manufacturer directly. Provide your product model number (AU-UV002-DS) and a detailed description of the issue for prompt support.
