Calogy Mini Heat Press Instruction Manual

Introduction

Thank you for choosing the Calogy Mini Heat Press. This compact and versatile heat transfer machine is designed for various craft projects, including T-shirts, hats, bags, and pillows. Its constant temperature control and insulated safety base ensure efficient and safe operation. Please read this manual thoroughly before first use to ensure proper operation and maintenance.

Figure 1: The Calogy Mini Heat Press is ideal for various small and unique heat transfer projects.

⚠ Important Safety Information

Caution/Prudence/Vorsicht/Precaución/Attenzione/Voorzichtigheid/Ostrożność: The heat plate and safety base become hot during use. Do not touch the hot surfaces directly. This device operates with high voltage, and children should only use it under the direct supervision of an adult.

Attention/Attention/Aufmerksamkeit/Atención/Attenzione/Aandacht/Uwaga: Always return the heat press to its safety base when not actively in use to prevent accidental contact with the hot plate.

INDOOR USE / UTILISATION À L'INTÉRIEUR / VERWENDUNG IM INNENBEREICH / USO INTERIOR / USO INTERNO / GEBRUIK BINNENSHUIS / UŻYTKOWANIE W WEWNĄTRZ: This product is designed for indoor use only.

NO RUBBISH BIN / PAS DE POUBELLE / KEIN MÜLLBEHÄLTER / SIN CONTENEDOR DE BASURA / NESSUN CONTENITORE DELLA RIFIUTI / GEEN VUILNISBAK / BRAK POJEMNIKA NA ŚMIECI: Do not dispose of this product in household waste. Please follow local regulations for electronic waste recycling.

Figure 2: Universal safety symbols and warnings for the Calogy Mini Heat Press.

Product Features

• Only 1 Button Design: Press 1 time to increase temp; press 2 times to decrease temp; Press 3 times to change temp unit; Only 1 button needed you can adjust temp, switch temp unit, power on or power off.
• Mini Size: The Calogy mini heat press machine is 4.5 x 2.9 x 5.1 inches (11.5x7.5x13 cm), Height and width are similar to a mobile phone; Heat plate size is 2.87 x 4.43 inches (7.29 x 11.25 CM).
• 3 Temp Levels: 3 levels temps to meet different purpose by this craft iron for crafting; Low temperature: 284 ℉ (140 ℃), Medium: 320 ℉ (160 ℃), High: 356 ℉ (180 ℃).
• Auto Power Off in 15 Mins: For safety, it will power off in 15 mins of inactivity; totally no worries of forgetting to power off; Also the safety base can prevent people from being scalded.
• LED Display Real Time Temp: The temperature visible on screen, you can see the realtime temp all the time, adjust temperature quickly.
• Fast Heating: Once power on, this shirt press machine can heat to 284 ℉ in around 3 mins, from 284 ℉ to 320 ℉, only around 40 S needed, from 320 ℉ to 356 ℉, around 50 S needed (Above datas the initial temp is 84 ℉).
• ℃ / ℉ Temp Unit Switchable: For different using habit, you can change the temp unit ℃ or ℉ very easy with the button.
• Comfort Handle: You can hold this mini heating press very comfortable with an ergonomics design.
• US Plug Inside, Power Cord Removeable: US Plug for 110-220V inside the package; the power cord can be removable for easy storage and portable purpose.
• Suitable for All Projects: Mini Press machine is suitable for unusually small or unique heat transfer projects, make personalized patterns on the surface of T- shirts, clothing, hats, bags, masks, socks, pillow etc; it's a good choice for festival to your family or lover.

Figure 3: Compact and portable design of the Calogy Mini Heat Press.

Know Your Calogy Mini Heat Press

Figure 4: Calogy Mini Heat Press components including the main unit with power button and display, and the separate safety base.

Components:

1. Button: Multi-function button for power, temperature adjustment, and unit switching.
2. Display: LED screen showing real-time temperature.
3. Body: The main housing of the heat press.
4. Heat Plate: The heated surface for transfer.
5. Safety Base: Insulated base for resting the hot heat press.

Figure 5: The anti-heat base provides a safe resting place for the hot heat press.

Setup

1. Unpack: Carefully remove the Calogy Mini Heat Press and all accessories from the packaging.
2. Inspect: Check the device for any signs of damage. Do not use if damaged.
3. Placement: Place the safety base on a flat, stable, heat-resistant surface. Ensure adequate ventilation.
4. Connect Power: Insert the power cord firmly into the heat press and then plug it into a 110-220V power outlet. Ensure the connection is tight to prevent issues.

Figure 6: Proper power cord connection. Ensure the cable is fully inserted for a secure connection.

Operating Instructions

Power On/Off:

Long press the power button (ⓘ) to turn the device ON or OFF. The LED display will show the current temperature.

Temperature Adjustment:

The Calogy Mini Heat Press features 3 temperature levels:

• L1 (Low Temperature): 284 ℉ (140 ℃)
• L2 (Medium Temperature): 320 ℉ (160 ℃)
• L3 (High Temperature): 356 ℉ (180 ℃)

To adjust the temperature:

1. Press the power button (ⓘ) one time to increase the temperature level (L1 → L2 → L3).
2. Press the power button (ⓘ) two times to decrease the temperature level (L3 → L2 → L1).

Figure 7: Temperature levels and adjustment methods.

Switching Temperature Unit (℃ / ℉):

Press the power button (ⓘ) three times to switch between Celsius (℃) and Fahrenheit (℉).

Automatic Power Off:

For safety, the heat press will automatically power off after 15 minutes of inactivity. This prevents accidental overheating if left unattended.

Figure 8: Automatic power-off feature for safety.

Fast Heating:

The Calogy Mini Heat Press heats up quickly, reaching 284 ℉ (140 ℃) in approximately 3 minutes. Subsequent temperature increases between levels are also rapid.

Figure 9: Quick heating-up and real-time temperature display.

Using the Heat Press:

1. Place your material (e.g., T-shirt, hat) on a heat-resistant surface.
2. Position your heat transfer design onto the material.
3. Once the heat press reaches the desired temperature (indicated on the LED display), gently press it onto the design. Apply even pressure.
4. Refer to your heat transfer material's specific instructions for recommended time and pressure.
5. After pressing, carefully lift the heat press and immediately place it back on its safety base.
6. Allow the material and design to cool before peeling, if required by your transfer material.

Figure 10: The heat plate provides even heating for perfect projects.

Maintenance

• Cleaning: Ensure the heat press is completely cool and unplugged before cleaning. Wipe the heat plate with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the heat press in a dry, cool place, away from direct sunlight and moisture. Always place it on its safety base when not in use.
• Cord Care: The power cord is removable for easy storage. Do not wrap the power cord tightly around the device. Store it loosely to prevent damage.

Figure 11: The removable power cord allows for easy storage and portability.

Troubleshooting

Specifications

Warranty

The Calogy Mini Heat Press comes with a 1-year warranty. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, please refer to the official Calogy website or contact customer support.

Customer Support

For any questions, technical assistance, or support, please contact Calogy customer service through the following channels:

• Online: Visit the Calogy Store on Amazon.
• User Manual (PDF): A digital version of this manual is available at https://manuals.plus/m/c8a0e1a497fcbbee76c822b4401ee8a76d2d6d4600a176543adcce2b7e6487d7.