1. Introduction
Thank you for choosing the Cecotec Ready Warm 2000 Now Mica Heater. This manual provides essential information for the safe and efficient use of your new heater. Please read it thoroughly before operation and retain it for future reference.
The Cecotec Ready Warm 2000 Now is a 2000W mica heater designed to provide rapid and efficient heating for areas up to 25 m². It features an adjustable thermostat and two power levels (1000W and 2000W) for customized comfort. Its lightweight design and integrated wheels ensure easy portability between rooms.
2. Safety Instructions
To prevent personal injury or property damage, always observe basic safety precautions when using electrical appliances. This heater is equipped with a triple safety system, including automatic shutdown in case of tipping or overheating, and a protective grille.
- Read all instructions before using the heater.
- Do not use the heater near water or in damp environments.
- Ensure the voltage indicated on the rating label matches your mains voltage.
- Do not cover the heater or obstruct its air inlets/outlets.
- Keep flammable materials at least 1 meter away from the heater.
- Always unplug the heater when not in use or before cleaning.
- Do not insert objects into the grilles.
- Supervise children and individuals with reduced physical, sensory, or mental capabilities when the heater is in use.
- Do not use the heater if the cord or plug is damaged. Contact authorized service personnel for repairs.
3. Product Components
Familiarize yourself with the main parts of your Cecotec Ready Warm 2000 Now Mica Heater.
Figure 1: Angled view of the Cecotec Ready Warm 2000 Now Mica Heater, showing the mica heating elements behind the protective grille, control knobs on the side, and wheels for portability.
- Mica Heating Elements
- Protective Grille
- Control Panel (Thermostat and Power Selector)
- Power Indicator Light
- Base with Wheels
- Power Cord and Plug
Figure 2: Front view of the heater, highlighting the mica heating elements glowing red when active, visible through the mesh grille.
Figure 3: Side view of the heater, showing the compact profile and the control panel on the right side.
4. Setup
4.1 Unpacking
Carefully remove the heater from its packaging. Retain the packaging for storage or future transport. Check for any signs of damage. If the product is damaged, do not use it and contact customer support.
4.2 Assembly (if required)
The Cecotec Ready Warm 2000 Now Mica Heater typically comes pre-assembled with its base and wheels. If the wheels or base require attachment, follow these steps:
- Place the heater upside down on a soft, flat surface to avoid scratching.
- Align the wheel assemblies with the designated slots on the heater's base.
- Secure the wheel assemblies using the provided screws. Ensure they are firmly attached.
- Return the heater to an upright position.
Figure 4: The heater's lightweight design and integrated wheels allow for easy movement between rooms.
4.3 Placement
Place the heater on a firm, level surface. Ensure there is adequate clearance around the heater (at least 1 meter from walls, furniture, curtains, and other flammable materials) to allow for proper air circulation and prevent fire hazards. Do not place the heater directly below a power outlet.
5. Operating Instructions
The Cecotec Ready Warm 2000 Now Mica Heater offers simple and intuitive controls for optimal heating.
Figure 5: Close-up of a hand adjusting one of the two control knobs on the side panel of the heater.
5.1 Powering On and Off
- Plug the power cord into a suitable electrical outlet. The power indicator light may illuminate.
- To turn on the heater, rotate the lower control knob (Power Selector) to your desired power level:
- I: 1000W (Low Power)
- II: 2000W (High Power)
- To turn off the heater, rotate the Power Selector knob to the "0" (Off) position and unplug the unit from the wall outlet.
5.2 Adjusting the Thermostat
The upper control knob functions as the adjustable thermostat. This allows you to set your desired room temperature.
- Once the heater is powered on (Power Selector set to I or II), rotate the upper control knob (Thermostat) clockwise to increase the desired temperature setting, or counter-clockwise to decrease it.
- The heater will cycle on and off to maintain the set temperature. When the room temperature reaches the set level, the heater will temporarily stop heating. It will resume heating when the temperature drops below the set point.
Figure 6: Detailed view of the control panel, showing the upper thermostat knob and the lower power selector knob.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your heater.
6.1 Cleaning
- Always unplug the heater and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Do not immerse the heater in water or any other liquid.
- Use a vacuum cleaner with a brush attachment to remove dust from the grilles.
- Ensure the heater is completely dry before plugging it back in.
6.2 Storage
When not in use, store the heater in a cool, dry place, preferably in its original packaging, to protect it from dust and damage. The heater features a foldable system for minimal space storage.
7. Troubleshooting
If you encounter issues with your heater, refer to the following troubleshooting guide. If the problem persists, contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. |
|
|
| Heater produces insufficient heat. |
|
|
| Unusual odor during initial use. | New appliance burning off manufacturing residues. | This is normal for the first few uses. Ensure good ventilation. The odor should dissipate quickly. |
8. Specifications
Technical details for the Cecotec Ready Warm 2000 Now Mica Heater.
| Feature | Detail |
|---|---|
| Brand | Cecotec |
| Model Number | 08266 |
| Power | 2000 W (2 levels: 1000W / 2000W) |
| Heating Method | Radiant and Convection |
| Coverage Area | Up to 25 m² |
| Thermostat | Adjustable |
| Safety System | Triple (Auto-off for tip-over/overheat, protective grille) |
| Dimensions (L x W x H) | 78 x 13.5 x 62.5 cm |
| Weight | 4.3 kg |
| Color | Black |
| Power Source | Corded Electric |
Figure 7: Rear view of the heater, showing the power cord exit point and the overall construction.
Figure 8: The heater positioned in a living room, demonstrating its compact size and suitability for various indoor spaces.
9. Warranty and Support
Cecotec products are manufactured to high-quality standards. This product comes with a manufacturer's warranty. Please refer to the warranty card included in the packaging for specific terms and conditions.
Spare parts availability for this model is indicated as 10 years from the date of purchase. For technical assistance, repairs, or questions regarding your product, please contact Cecotec customer support through their official website or the contact information provided in your product documentation.
For more information, visit the official Cecotec website: www.cecotec.com
