Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Ucloveria Loveseat Sleeper Sofa with USB Charging. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of your product. Keep this manual for future reference.
Safety Information
- Ensure all components are present and undamaged before assembly.
- Do not exceed the maximum weight limit of 500 pounds.
- Keep children and pets away from the assembly area.
- Use caution when converting the sofa to a sleeper to avoid pinching.
- Only use the USB charging ports for compatible devices and avoid overloading.
Included Components
Before beginning assembly, verify that all the following components are present:
- 1 × Sofa Bed Frame
- 2 × Arm Pockets
- 2 × Pillows
- 2 × USB Charging Holes (integrated)
- Assembly Hardware (screws, washers, tools if provided)
Setup and Assembly
Assembly is required for this product. Please follow the instructions provided in the separate assembly guide included with your purchase. Ensure all parts are securely fastened before use.
Product Dimensions
Refer to the diagram below for the dimensions of the sofa in both upright and sleeper configurations.

Figure 1: Product Dimensions (Sofa and Sleeper Modes)
- Sofa Dimensions: 37.4"D x 55.5"W x 31.1"H
- Sleeper Dimensions (Extended): Approximately 69"L x 55.5"W x 23.6"H (bed height 16.55")
- Seat Height: 16.5 Inches
Operating Instructions
Converting from Sofa to Sleeper
- Ensure there is sufficient clear space in front of the sofa for extension.
- Grasp the pull-out handle located at the front base of the sofa.
- Gently pull the bed frame outwards until it is fully extended and locked into place. The support legs will automatically deploy.
- To revert to sofa mode, lift the front edge of the extended bed slightly to disengage the lock, then push the bed frame back into the sofa base until it is fully retracted.

Figure 2: Sofa with pull-out bed partially extended

Figure 3: Sofa fully extended into sleeper mode
Using the USB Charging Ports
The sofa is equipped with two USB charging ports located on the side armrest. To use them:
- Ensure the sofa's power cord is plugged into a functional wall outlet.
- Connect your USB charging cable to the port and your device.
- The ports are designed for charging small electronic devices such as smartphones and tablets.

Figure 4: USB Charging Ports and Arm Pocket
Adjusting the Backrest
The backrest offers 3 adjustable angles for personalized comfort. To adjust:
- Gently push the backrest forward until you hear a click, then release to the desired angle.
- To reset, push the backrest fully forward until it clicks, then allow it to recline to the lowest position.
Using the Arm Pockets
Two detachable arm pockets are included for convenient storage of magazines, remote controls, or other small items. Simply attach them to the armrests as desired.
Maintenance
Proper care will extend the life and appearance of your sofa.
- Regular Cleaning: Dust the sofa regularly with a soft, dry cloth.
- Spot Cleaning: For spills, clean gently with a clean, slightly damp cloth. Blot the stain; do not rub.
- Professional Cleaning: Professional cleaning is recommended for deeper cleaning or stubborn stains.
- Avoid Harsh Chemicals: Never apply or clean with harsh chemicals, abrasive cleaners, or strong detergents, as these can damage the fabric.
- Sunlight Exposure: Avoid direct sunlight exposure to prevent fading of the upholstery fabric.
- Pillows: The included pillows can be fluffed regularly to maintain their shape.
Troubleshooting
If you encounter any issues with your Ucloveria Loveseat Sleeper Sofa, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Sofa does not convert smoothly to sleeper. | Obstruction, mechanism not aligned, or parts not fully assembled. | Check for any objects blocking the pull-out mechanism. Ensure all assembly hardware is tightened. Gently guide the mechanism. |
| USB ports are not charging devices. | Sofa not plugged in, power outlet issue, or faulty cable/device. | Verify the sofa's power cord is securely plugged into a working outlet. Test the outlet with another device. Try a different USB cable or device. |
| Backrest does not adjust. | Mechanism stuck or not fully engaged. | Push the backrest fully forward until it clicks, then attempt to recline to the desired position. Ensure no fabric is caught in the mechanism. |
| Squeaking noises during use. | Loose connections or friction in moving parts. | Check and tighten all visible screws and bolts. Apply a small amount of silicone lubricant to moving metal parts if necessary. |
If the problem persists after attempting these solutions, please contact Ucloveria customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | Ucloveria |
| Model Number | B0BPSZFJY5 |
| UPC | 652726559012 |
| Type | Convertible Loveseat Sleeper Sofa |
| Color | Black |
| Seating Capacity | 2 |
| Weight Limit | 500 Pounds |
| Item Weight | 119 Pounds |
| Sofa Dimensions (D x W x H) | 37.4" x 55.5" x 31.1" |
| Sleeper Dimensions (Extended) | Approx. 69"L x 55.5"W x 23.6"H |
| Seat Height | 16.5 Inches |
| Upholstery Fabric Type | Linen |
| Frame Material | Iron, Metal, Wood |
| Fill Material | Foam |
| Additional Features | 2 pillows, 3 adjustable backrest angles, Storage bags, USB charging hole |
| Assembly Required | Yes |
Warranty and Support
Manufacturer Warranty
This Ucloveria Loveseat Sleeper Sofa is covered by a 2-year manufacturer's warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For warranty claims, missing parts, assembly assistance, or any other product-related inquiries, please contact Ucloveria customer support through the retailer where the product was purchased or visit the official Ucloveria website for contact information.
When contacting support, please have your model number (B0BPSZFJY5) and proof of purchase readily available.