1. Introduction
Thank you for choosing the NEXPOW 2000A Peak Car Battery Jump Starter. This portable and powerful device is designed to jump-start vehicles with up to 7.0L gas or 6.5L diesel engines, and also functions as a portable power bank and LED flashlight. Please read this manual thoroughly before use to ensure safe and optimal performance.
The NEXPOW 2000A Peak Car Battery Jump Starter is a versatile device capable of jump-starting various vehicles.
2. Package Contents
Please check the package for the following items:
- Portable Lithium Car Battery Jump Starter Pack
- Heavy-Duty Battery Clamps
- USB Type-C Charging Cable
- User Manual
- Delicate Carrying Case
- 15W Adaptor
All components included in the NEXPOW 2000A Jump Starter package.
3. Product Features
- Upgrade QDSP Technology: Provides 3-5 times enhanced current compared to older generations, ensuring a safe and efficient start by balancing temperature.
- Super Capacity and Peak Current: Capable of jump-starting vehicles (up to 7.5L gas or 6.5L diesel engine) up to 20 times on a single charge with 2000-amp peak current. Works for cars, trucks, motorcycles, snowmobiles, ATVs, UTVs, lawnmowers, and yachts.
- Improved Safety Technology: Features spark-proof design, reverse polarity protection, low voltage protection, high-temperature protection, and over-load protection. An audible buzz and flashing lights indicate incorrect use.
- Portable Emergency Power Bank: Equipped with two USB outputs (5V/3A and 5V/2.1A) including a Quick Charge 3.0 port for fast charging of mobile devices.
- Built-in LED Flashlight: Offers three modes: Flash Light, Strobe Light, and SOS Light, useful for various emergency and outdoor situations.
The jump starter is suitable for a wide range of vehicles including cars, trucks, motorcycles, and more.
The device features multiple USB outputs for quick charging of various electronic devices.
The integrated LED flashlight offers multiple modes for different lighting needs.
4. Safety Information
Always adhere to the following safety guidelines when using the jump starter:
- Do not use the product at high temperatures or store it in a high-temperature environment for extended periods.
- Avoid jump-starting the car at high frequency continuously. Allow the jump starter to cool down for at least 1 minute between each starting attempt.
- Ensure correct connections to the car battery to prevent sparks. The device has built-in protections against reverse polarity, low voltage, high temperature, and overload.
- Operating temperature range: -20℃ to 60℃ (-4℉ to 140℉).
The smart jumper cables provide multiple layers of protection for safe operation.
5. Setup
Before first use, fully charge the jump starter using the provided USB Type-C charging cable and 15W adaptor. The power indicator lights will show the charging status.
6. Operating Instructions
6.1. Jump Starting Your Vehicle
- Step 1: Insert the jumper cable into the jump starter's EC5 interface.
- Step 2: Connect the red (+) clamp to the positive terminal of your car battery and the black (-) clamp to the negative terminal.
- Step 3: Start your car engine.
- Step 4: Once the car starts, remove the clamps from the car battery to complete the operation.
Follow these four simple steps to safely jump start your vehicle.
6.2. Charging Mobile Devices
Connect your smartphone, tablet, or other USB-powered devices to the USB output ports (Output 1: 5V/3A Quick Charge 3.0, Output 2: 5V/2.1A) on the jump starter using your device's charging cable. The jump starter will automatically begin charging your device.
6.3. Using the LED Flashlight
Press and hold the power button to turn on the LED flashlight. Press the power button again to cycle through the modes: Flash Light, Strobe Light, and SOS Light. Press and hold the power button again to turn off the flashlight.
7. Maintenance
To maintain the health and longevity of your jump starter's battery, it is recommended to charge it every 2-3 months if it has not been used for a long time.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter does not turn on. | Battery is depleted. | Charge the jump starter fully. |
| Vehicle does not start. | Incorrect clamp connection; jump starter low on power; vehicle battery completely dead. | Ensure clamps are connected correctly (red to positive, black to negative). Recharge jump starter. If vehicle battery is completely dead, it may require professional assistance. |
| Audible buzz/flashing lights during jump start. | Incorrect connection (e.g., reverse polarity). | Disconnect clamps immediately and re-connect them correctly. |
| Device gets hot during use. | Normal operation during high current discharge; continuous use without cooling. | Allow the device to cool down for at least 1 minute between jump start attempts. Ensure proper ventilation. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | NEXPOW |
| Model | G17 |
| Peak Current | 2000 Amps |
| Engine Compatibility | Up to 7.0L Gas or 6.5L Diesel Engine |
| USB Output 1 | 5V/3A (Quick Charge 3.0) |
| USB Output 2 | 5V/2.1A |
| Operating Temperature | -20℃ to 60℃ (-4℉ to 140℉) |
| Item Weight | 2.64 pounds |
| Batteries | 4 Lithium Ion batteries (included) |
Detailed view of the NEXPOW Jump Starter with its various ports and indicators.
10. Warranty and Support
For warranty information or technical support, please refer to the warranty card included in your package or contact NEXPOW customer service directly. Keep your purchase receipt for warranty claims.
