SHEHDS Par IP65 Waterproof Outdoor LED Stage Light User Manual

Introduction

This manual provides comprehensive instructions for the safe and efficient operation of your SHEHDS Par IP65 Waterproof Outdoor LED Stage Light. Please read this manual thoroughly before use and retain it for future reference.

Key Features

• IP65 Waterproof and Muted Design: Constructed with a durable cast aluminum shell, this LED par light is designed for outdoor use, offering protection against water and dust. Its fanless design ensures 100% muted operation, making it suitable for environments requiring minimal noise.
• RGBWA+UV 6-in-1 Par Lights: Equipped with 7 LEDs (7*18W) featuring Red, Green, Blue, White, Amber, and UV (Ultraviolet) colors, allowing for a wide spectrum of mixed colors. It supports color changing, light dimming, and strobe effects to create dynamic stage lighting. Efficient optics lens maximizes brightness.
• Multiple Operational Modes: Supports DMX512, Auto Run, Sound Active, Stand Alone, and Master/Slave modes for versatile control. It features professional 11/5/6/6/7/8/5 DMX Channels with smooth electronic dimming from 0-100%.
• Convenient Installation: Features a flexible double bracket and knob for easy adjustment, allowing for simple installation on floors, trusses, or ceilings. Designed for long-term operation.
• Wide Application: Ideal for various occasions including DJ setups, Karaoke, Ballrooms, KTV, Discos, Pubs, Theaters, Churches, Clubs, Bars, Shopping Malls, DJ-shows, Halloween, Christmas, Weddings, and home indoor celebrations.

Package Contents

Upon opening the package, please verify that all components are present and in good condition. The package typically includes:

• SHEHDS Par IP65 Waterproof Outdoor LED Stage Light (1 unit)
• Power Cable (Waterproof connector)
• DMX Cable (Waterproof connector)
• Mounting Bracket and Knobs
• User Manual
• Bulb (pre-installed)

Image: The product package showing the LED light, power cable, DMX cable, and mounting accessories.

Setup

Follow these steps to set up your SHEHDS LED Stage Light:

1. Unpacking: Carefully remove the light and all accessories from the packaging.
2. Mounting: Use the provided double bracket and knobs to position the light as desired. It can be placed on the floor, mounted on a truss, or hung from the ceiling. Ensure the mounting is secure to prevent accidental falls.
3. Power Connection: Connect the waterproof power cable to the "Power In" port on the back of the unit. Align the grooves on the connector and push it in firmly, then twist to secure the waterproof seal. Plug the other end into a suitable power outlet (AC 1.2E+2 Volts).
4. DMX Connection (Optional): If using DMX control, connect a DMX cable from your DMX controller to the "DMX In" port on the light. For daisy-chaining multiple lights, connect a DMX cable from the "DMX Out" port of the first light to the "DMX In" port of the next light.

Image: The SHEHDS Par IP65 light, showcasing its robust, waterproof design suitable for outdoor environments.

Operating Modes

The SHEHDS LED Stage Light offers several operational modes, selectable via the control panel on the rear of the unit:

• DMX512 Mode: For professional control using a DMX controller. The light supports 10-channel and 6-channel DMX modes, allowing precise control over color mixing, dimming, strobe, and other effects.
• Auto Run Mode: The light cycles through pre-programmed patterns and colors automatically.
• Sound Active Mode: The light reacts to sound and music, changing patterns and colors in sync with the audio.
• Stand Alone Mode: Operates independently using built-in programs without external control.
• Master/Slave Mode: Connect multiple lights together. One light acts as the master, controlling the others (slaves) to synchronize effects.

Image: Examples of the vibrant color output from the RGBWA+UV LEDs.

DMX Channels

The light supports both 10-channel and 6-channel DMX modes. Below is a general overview of common DMX functions. Refer to the included user manual for the complete DMX chart and specific channel assignments.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your LED stage light:

• Cleaning: Periodically clean the lens and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Inspection: Regularly check all cables and connectors for any signs of wear, damage, or corrosion. Ensure all waterproof seals are intact.
• Storage: When not in use for extended periods, store the light in a dry, dust-free environment, preferably in its original packaging or a protective case.
• Ventilation: Ensure adequate airflow around the unit during operation to prevent overheating, despite its fanless design.

Troubleshooting

If you encounter issues with your SHEHDS LED Stage Light, refer to the following common problems and solutions:

Specifications

Image: Detailed dimensions and weight of the product.

Warranty & Support

SHEHDS is committed to providing quality products and customer satisfaction.

• 1-Month Replacement: In case of any manufacturing defects or issues within the first month of purchase, the product is eligible for a replacement.
• 1-Year Warranty: The product is covered by a 1-year warranty from the date of purchase against defects in materials and workmanship.
• Instant Customer Service: For any inquiries, technical support, or warranty claims, please contact SHEHDS customer service.

Note: After setting the DMX address, as long as you press the OK key, even if you shut down and restart, the original DMX address will be retained.