1. Safety Instructions
Please read all instructions carefully before assembly and use. Keep this manual for future reference.
- For indoor use only. Do not expose to water or high humidity.
- Ensure the power source matches the lamp's voltage (120 Volts).
- Do not attempt to disassemble or modify the lamp. Refer all servicing to qualified personnel.
- Keep the lamp away from heat sources and flammable materials.
- Always unplug the lamp from the power outlet before cleaning or performing any maintenance.
- Do not use a bulb with a wattage higher than specified (9W LED bulb included).
2. Package Contents
Verify that all components listed below are included in your package:
- Lamp Base
- Lamp Pole Sections (multiple)
- Lampshade
- 9W LED Bulb (E26 Medium Base)
- Remote Control
- Socket Ring
- Power Cord with Foot Switch
All components included in the package.
3. Setup and Assembly
Follow these steps to assemble your Ambimall Floor Lamp:
- Install the Lampshade: The lampshade comes rolled up. Wrap it around the wire frame and secure it using the Velcro closure.
- Screw Pole Sections: Screw all the lamp pole sections together firmly from top to bottom.
- Insert into Base: Insert the assembled lamp pole into the lamp base and tighten securely.
- Unscrew Socket Ring: Unscrew the socket ring from the lampholder.
- Install Lampshade: Place the assembled lampshade onto the lampholder and screw the socket ring back on to secure it.
- Install LED Bulb: Screw the included 9W LED bulb into the E26 medium base socket.
Step-by-step guide for assembling your Ambimall Floor Lamp.
4. Operating Instructions
Your Ambimall Floor Lamp can be operated using the remote control or the integrated foot switch.
Remote Control Functions:
- On/Off: Press the power button to turn the lamp on or off.
- Brightness Adjustment: Use the '+' and '-' buttons to steplessly adjust brightness from 10% to 100%.
- Color Temperature Adjustment: Use the 'K' button to cycle through color temperatures (3000K Warm White, Natural White, 6000K Cool White).
- 1-Hour Timer: Press the '1H' button to activate a 1-hour timer, after which the lamp will automatically turn off.
- Preset Modes: Dedicated buttons for 'Babyfeeding mode', 'Working mode', and 'Reading mode' adjust brightness and color temperature to optimal settings for these activities.
Understanding the remote control functions for your floor lamp.
Foot Switch Operation:
The lamp also features a convenient foot switch on the power cord. Ensure the foot switch is in the 'ON' position for the remote control to function.
5. Key Features
- Dimmable Brightness & Color Temperature: Stepless adjustment from 10% to 100% brightness and 3000K (warm white) to 6000K (cool white) color temperature.
- Dual Control: Operate conveniently with the included remote control or the integrated foot switch.
- 1-Hour Timer: Set the lamp to automatically turn off after one hour, ideal for bedtime.
- Magnetic Remote: The remote control is magnetic, allowing it to be conveniently stored on the lamp pole or any metal surface to prevent loss.
- Space-Saving Design: Its skinny and elegant design allows it to fit easily into various room settings, including tight corners.
The Ambimall Floor Lamp offers stepless dimming and adjustable color temperatures.
Adjustable color temperature from warm white to cool white.
Stepless brightness adjustment from 30% to 100%.
Convenient remote control operation for easy adjustments.
The 1-hour timer function for automatic shut-off.
6. Maintenance
To ensure the longevity and optimal performance of your Ambimall Floor Lamp, follow these maintenance guidelines:
- Cleaning: Always unplug the lamp before cleaning. Use a soft, dry cloth to wipe down the lamp pole and base. For the lampshade, a soft, slightly damp cloth can be used, but avoid excessive moisture. Do not use abrasive cleaners or solvents.
- Bulb Replacement: If the included LED bulb needs replacement, ensure the lamp is unplugged and cool. Replace with an E26 medium base LED bulb, not exceeding 9W.
- Cord Care: Regularly inspect the power cord for any damage. Do not place heavy objects on the cord or expose it to sharp edges.
7. Troubleshooting
If you encounter issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose bulb, foot switch off. | Check power outlet, ensure plug is fully inserted. Tighten the bulb. Ensure the foot switch is in the 'ON' position. |
| Remote control not working. | Remote battery low/dead, remote not paired, foot switch off. | Replace remote battery. Ensure the foot switch is 'ON'. Try re-pairing the remote (refer to specific pairing instructions if provided with the remote, usually involves holding a button near the lamp). |
| Light flickers or is inconsistent. | Loose bulb, unstable power, faulty bulb. | Tighten the bulb. Try plugging the lamp into a different outlet. Replace the bulb if necessary. |
8. Specifications
| Brand | Ambimall |
| Model Number | ABM-22120904 |
| Product Dimensions | 7.87"D x 7.87"W x 64.57"H |
| Item Weight | 5.73 Pounds |
| Material | Metal |
| Finish Type | Painted |
| Shade Material | Metal |
| Bulb Base | E26 Medium |
| Light Source Type | LED |
| Wattage | 9 watts |
| Brightness | 900 Lumen |
| Color Temperature | 3000K - 6000K |
| Control Method | Remote Control, Foot Switch |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Indoor/Outdoor Usage | Indoor |
| Assembly Required | Yes |
9. Warranty and Support
For product support, troubleshooting assistance, or warranty inquiries, please contact Ambimall customer service through the retailer's platform or the official Ambimall website.
Please retain your proof of purchase for any warranty claims. Standard return policies typically allow for returns within 30 days of purchase.