Souvia Juicer Extractor Attachment User Manual

1. Introduction

Thank you for choosing the Souvia Juicer Extractor Attachment. This accessory is designed to seamlessly integrate with specific Braun food processor models, transforming your appliance into an efficient juicer. It allows you to extract fresh juice from a variety of fruits and vegetables, enhancing your culinary experience.

This manual provides essential information for the safe and effective use, assembly, operation, and maintenance of your new juicer attachment. Please read it thoroughly before first use and keep it for future reference.

Compatible Braun Food Processor Models:

• K650
• K600
• K700
• K750
• FP3010
• FP3020
• FX3030WH

2. Important Safety Instructions

Always follow basic safety precautions when using electrical appliances, especially attachments. Failure to do so may result in injury or damage to the appliance.

• Read all instructions: Familiarize yourself with the operation of both the attachment and your Braun food processor.
• Unplug before assembly/disassembly: Always ensure the food processor is unplugged from the power outlet before attaching, removing, or cleaning any parts.
• Avoid contact with moving parts: Keep hands, hair, clothing, and utensils away from moving parts during operation to prevent injury.
• Do not force food: Use the provided pusher to guide food into the chute. Never use fingers or other objects.
• Supervision: Close supervision is necessary when any appliance is used by or near children.
• Damaged parts: Do not operate the attachment if any part is damaged. Contact customer support for replacements.
• Intended use: Use the attachment only for its intended purpose of juicing fruits and vegetables.

3. Parts Identification

The Souvia Juicer Extractor Attachment consists of the following main components:

• Container: The main body of the juicer attachment that collects pulp and juice.
• Extractor Basket/Filter: The component responsible for separating juice from pulp.
• Lid: Covers the top of the container and features a feeding chute.
• Pusher: Used to safely guide fruits and vegetables into the feeding chute.

An image showing the complete Souvia Juicer Extractor Attachment, ready for assembly or use with a compatible Braun food processor. The main components visible are the base container, the juicing basket, the lid with a feeding chute, and the pusher.

4. Setup and Assembly

Before first use, wash all removable parts of the juicer attachment in warm, soapy water, rinse thoroughly, and dry. Ensure your Braun food processor is unplugged before assembly.

1. Place the main Container onto the motor unit of your compatible Braun food processor, ensuring it is securely locked into position according to your food processor's instructions.
2. Insert the Extractor Basket/Filter into the container, making sure it sits firmly at the bottom.
3. Place the Lid onto the container, aligning it correctly and twisting to lock it into place. The lid should be securely fastened before operation.
4. Insert the Pusher into the feeding chute of the lid.
5. Your Souvia Juicer Extractor Attachment is now assembled and ready for use.

5. Operating Instructions

Follow these steps to operate your juicer extractor attachment:

1. Prepare Ingredients: Wash fruits and vegetables thoroughly. Cut larger items into pieces that fit easily into the feeding chute. Remove any hard pits or large seeds (e.g., from peaches, plums). Peeling is optional for most fruits and vegetables, but recommended for citrus fruits to avoid bitterness.
2. Position Container: Ensure a suitable container or glass is placed under the juice spout of the attachment to collect the extracted juice.
3. Plug In: Plug your Braun food processor into a power outlet.
4. Start Juicing: Turn on your food processor to the recommended speed setting for juicing (refer to your food processor's manual).
5. Feed Ingredients: Gradually feed the prepared fruits and vegetables into the feeding chute using the Pusher. Apply gentle, even pressure. Do not force ingredients.
6. Monitor Pulp: The pulp will collect in the designated area of the container. Stop juicing if the pulp container becomes full or if the juicer appears to be struggling.
7. Finish: Once all ingredients are juiced, turn off the food processor and unplug it from the power outlet.
8. Enjoy: Serve the fresh juice immediately for best taste and nutritional value.

6. Maintenance and Cleaning

Proper cleaning and maintenance will ensure the longevity and optimal performance of your juicer attachment. Always unplug the food processor before cleaning.

• Disassembly: Carefully disassemble the juicer attachment in reverse order of assembly.
• Hand Wash Only: All removable parts of the Souvia Juicer Extractor Attachment are hand wash only. Do not place them in a dishwasher.
• Cleaning Steps:
  1. Rinse all parts immediately after use to prevent pulp from drying and sticking.
  2. Wash parts in warm, soapy water using a soft brush to remove any stubborn pulp, especially from the extractor basket/filter.
  3. Rinse thoroughly under running water.
  4. Dry all parts completely before reassembling or storing.
• Motor Unit: Wipe the motor unit of your Braun food processor with a damp cloth. Never immerse the motor unit in water or any other liquid.
• Storage: Store the clean and dry attachment in a safe place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your Souvia Juicer Extractor Attachment, refer to the following common problems and solutions:

• Juicer not operating:
  • Ensure the food processor is properly plugged in.
  • Check that the juicer attachment and food processor lid are correctly assembled and locked into place.
  • Verify the food processor's power switch is in the 'ON' position.
• Low juice yield or excessive pulp:
  • Ensure fruits and vegetables are fresh and firm.
  • Feed ingredients slowly and apply gentle, consistent pressure with the pusher.
  • The extractor basket/filter might be clogged. Disassemble and clean it thoroughly.
  • Some fruits and vegetables naturally yield less juice than others.
• Vibration or unusual noise:
  • Check that all parts are correctly assembled and securely locked.
  • Ensure the food processor is on a stable, flat surface.
  • Reduce the amount of food being fed at one time.
• Leakage:
  • Ensure the container and lid are properly sealed and locked onto the food processor base.
  • Check for any cracks or damage to the parts.

If the problem persists after attempting these solutions, please contact customer support.

8. Specifications

9. Warranty Information

This Souvia Juicer Extractor Attachment is covered by a limited warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For specific warranty terms and conditions, refer to the documentation provided with your original purchase or visit the Souvia official website.

10. Customer Support

If you have any questions, require assistance, or need to report a problem with your Souvia Juicer Extractor Attachment, please contact our customer support team. For the most up-to-date contact information, please visit the Souvia brand store on Amazon or the official Souvia website.

Online Support: Souvia Store on Amazon