1. Introduction
Thank you for choosing the GLOBE Electric 64000012 30-inch 4-Light Track Lighting fixture. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting system. Please read these instructions thoroughly before beginning installation and retain them for future reference.
Image 1.1: The GLOBE Electric 64000012 30-inch 4-Light Track Lighting fixture.
2. Important Safety Information
To reduce the risk of fire, electric shock, or personal injury, always follow these basic safety precautions:
- Read all instructions: Before installing or using this fixture.
- Electrical Safety: All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Disconnect Power: Always turn off the power at the main circuit breaker or fuse box before beginning installation or performing any maintenance.
- Grounding: Ensure the fixture is properly grounded to avoid potential electrical shock.
- Bulb Requirements: Use only GU10/Twist and Click Base MR16 50W bulbs (sold separately). Do not exceed the maximum wattage.
- Heat: Halogen bulbs can become very hot. Allow bulbs to cool before touching.
- Dimmable Feature: If using a dimmer, ensure it is compatible with GU10 bulbs and installed by a qualified professional.
- Indoor Use Only: This fixture is designed for indoor use in dry locations.
3. Package Contents
Verify that all components are present before beginning installation:
- Track Light Fixture (1)
- Mounting Hardware (1 set)
- Instruction Sheet (1)
Image 3.1: Example of product packaging, showing the track light fixture.
4. Product Specifications
| Feature | Specification |
|---|---|
| Brand | Globe Electric |
| Model Name | Pratt |
| Part Number | 64000012 |
| Color | Black, Pratt |
| Material | Metal |
| Product Dimensions | 4.75"L x 30"W x 7.25"H (12cm L x 76.2cm W x 18.32cm H) |
| Power Source | Hardwired |
| Installation Type | Ceiling Mount |
| Number of Light Sources | 4 |
| Bulb Base | GU10 |
| Max Wattage per Bulb | 50 Watts |
| Voltage | 120 Volts |
| Special Features | Dimmable, Matte Black Finish, Pivoting Track Heads |
| Indoor/Outdoor Usage | Indoor |
Image 4.1: Product dimensions for planning installation.
5. Setup and Installation
5.1. Before You Begin
- Ensure power is OFF at the circuit breaker.
- Gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).
- Review all local electrical and building codes.
5.2. Installation Steps
- Prepare Wiring: Carefully pull the electrical wires from the outlet box.
- Connect Wires: Connect the fixture's wires to the house wires (black to black, white to white, ground to ground) using wire connectors. Secure with electrical tape.
- Mount Fixture: Attach the mounting bracket to the outlet box. Secure the fixture base to the mounting bracket using the provided screws.
- Install Bulbs: Insert four GU10/Twist and Click Base MR16 50W bulbs (sold separately) into each track head. A suction cup tool (often included with GU10 bulbs) can assist with installation.
- Restore Power: Turn the power back ON at the circuit breaker.
Image 5.1: The track lighting fixture installed in a living room setting.
Image 5.2: The track lighting fixture providing illumination over a desk area.
6. Operation
6.1. Basic Operation
Once installed and powered, the fixture operates via your wall switch. If connected to a compatible dimmer switch (sold separately), you can adjust the light intensity to create the desired atmosphere.
6.2. Adjusting Light Heads
The four cylindrical track heads are designed to pivot, allowing you to direct light precisely where needed. Gently grasp each light head and rotate or tilt it to your preferred angle. This feature is ideal for accent lighting or illuminating specific areas.
Image 6.1: Adjustable heads allow for directional lighting.
Image 6.2: The fixture is fully dimmable with a compatible dimmer switch.
7. Maintenance
7.1. Cleaning
Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
7.2. Bulb Replacement
Ensure power is OFF and bulbs have cooled completely before attempting replacement. This fixture uses GU10/Twist and Click Base MR16 50W bulbs. To replace, gently push the bulb into the socket and twist counter-clockwise to remove. Insert the new bulb by pushing it in and twisting clockwise until secure. A suction cup tool can be helpful for this process, especially if the bulbs are difficult to grip.
Image 7.1: Reminder of GU10 bulb requirement for the fixture.
8. Troubleshooting
If you experience issues with your track lighting, refer to the table below for common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture; Loose wiring; Faulty bulb | Check circuit breaker; Verify wire connections; Replace bulb. |
| Lights flicker | Loose bulb; Incompatible dimmer switch; Loose wiring | Ensure bulbs are seated correctly; Use a compatible dimmer; Check wire connections. |
| Bulbs burn out quickly | Incorrect bulb wattage; Poor ventilation; Voltage fluctuations | Use correct 50W GU10 bulbs; Ensure proper air circulation; Consult an electrician for voltage issues. |
9. Warranty and Support
9.1. Warranty Information
This product comes with no warranty. Please refer to your retailer's return policy for any issues upon purchase.
9.2. Customer Support
For further assistance or inquiries, please contact Globe Electric customer service through their official website or the retailer where the product was purchased.
