1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Aiwen LED Vanity Light Fixture. Please read this manual thoroughly before installation and retain it for future reference. This fixture is designed for indoor use only, ideal for bathrooms, living rooms, study rooms, and as accent lighting for artwork.
Image 1.1: Aiwen LED Vanity Light Fixture in a bathroom setting.
2. Safety Instructions
- Electrical Safety: Always turn off the power at the circuit breaker or fuse box before beginning installation or performing any maintenance.
- Professional Installation: Installation should be performed by a licensed electrician to ensure compliance with local electrical codes and safety standards.
- Wiring: Ensure all wire connections are secure and properly insulated. Refer to the wiring diagram provided in the installation hardware. For wiring, typically green/yellow is ground, brown is live (black), and blue is neutral (white).
- Indoor Use Only: This fixture is designed for indoor use in dry or damp locations. Do not expose to direct water spray or immerse in water.
- Fixture Integrity: Do not modify the fixture. Any modifications may void the warranty and create a safety hazard.
3. Package Contents
Verify that all components are present before beginning installation:
- LED Vanity Light Fixture (1)
- Mounting Hardware Kit (screws, wire nuts, mounting bracket)
- Installation Instructions
Note: The light kit is included and the shade is integrated into the design.
4. Setup and Installation
Follow these steps for proper installation of your vanity light fixture:
- Prepare for Installation: Turn off power at the main circuit breaker. Clear the installation area.
- Mounting Bracket Installation: Attach the mounting bracket to the junction box using the provided screws. Ensure it is securely fastened.
- Wiring Connections: Connect the fixture's wires to your household wiring.
- Connect the ground wire (green/yellow) from the fixture to the ground wire from the junction box.
- Connect the live wire (brown) from the fixture to the live wire (black) from the junction box.
- Connect the neutral wire (blue) from the fixture to the neutral wire (white) from the junction box.
- Secure all connections with wire nuts and ensure no bare wires are exposed.
- Attach Fixture to Mounting Bracket: Carefully align the fixture with the mounting bracket and secure it using the provided screws.
- Adjusting the Light Direction: The light bar is 180 degrees adjustable. Loosen the screw at the adjustable joint, rotate the light bar to your desired angle, and then tighten the screw to secure it. Ensure the alignment interfaces click into place for a stable position.
Image 4.1: 180-degree adjustable light bar.
Image 4.2: Detail of the adjustable joint for light direction.
Image 4.3: Product dimensions for installation planning.
Important: Before purchasing, carefully read the size of the base and confirm suitability with your junction box.
5. Operating Instructions
Your Aiwen LED Vanity Light Fixture features three color temperature settings:
- Cool White (6000K)
- Neutral Daylight (4000K)
- Soft White (3000K)
To cycle through these color temperatures, use your standard wall switch:
- Turn the light ON using the wall switch. The fixture will illuminate with one of the three color temperatures.
- To change the color temperature, quickly turn the wall switch OFF and then immediately ON again. The light will switch to the next color temperature in the cycle.
- Repeat this process until your desired color temperature is achieved.
Important Note:
This vanity light does NOT have a memory function. Each time you turn the light on after a prolonged off period, it will default to the first color mode in the cycle. If you require a light that retains its last selected color temperature, this model may not be suitable for your needs.
6. Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: The LED light source is integrated and non-removable. It is designed for a long service life and does not require bulb replacement.
- Inspection: Periodically check for any loose connections or damage to the fixture. If any issues are found, consult a qualified electrician.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims. |
|
|
| Color temperature changes unexpectedly. |
|
|
| Light bar is crooked after installation. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Aiwen |
| Model | 9W/22.04inch |
| Color | Brass Gold (3 Color Temperature) |
| Material | Bronze, Polycarbonate |
| Style | Modern, Retro Theme |
| Light Fixture Form | Vanity |
| Room Type | Bathroom, Living Room, Study Room, Pictures, Entryway, Foyer, Restaurant, Bedroom |
| Specific Uses | Indoor use only |
| Power Source | Hardwired (AC/DC) |
| Light Source | LED (Integrated, Non-Removable) |
| Number of Light Sources | 1 |
| Voltage | 110 Volts |
| Light Color Temperatures | Cool White 6000K, Neutral Daylight 4000K, Soft White 3000K |
| Lighting Method | Adjustable (180 degrees) |
| Wattage | 9 Watts |
| Brightness | 675 Lumens |
| Control Method | Wall Switch (for CCT cycling) |
| Water Resistance Level | Water Resistant |
| Mounting Type | Wall Mount |
| Required Assembly | Yes |
| Item Dimensions (L x W x H) | 22.04"L x 3.54"W x 4.52"H |
| Item Weight | 3.04 Pounds |
9. Warranty and Support
Manufacturer Warranty: This Aiwen LED Vanity Light Fixture comes with a 1-year manufacturer warranty.
For any questions, concerns, or technical support regarding your product, please contact Aiwen customer service. Refer to the contact information provided with your purchase documentation or visit the official Aiwen website.
We recommend keeping your purchase receipt for warranty claims.
