1. Product Overview
The Yosoo Motorcycle LCD Meter Digital Tachometer is a versatile instrument designed for motorcycles, offering clear and comprehensive display of essential riding information. Constructed from durable ABS material, it is built for longevity and resistance to wear.
This meter is compatible with universal motorcycle models, including 1, 2, and 4-cylinder engines. Its compact design ensures easy installation and operation.
Image 1.1: Yosoo Motorcycle LCD Meter Digital Tachometer displaying various metrics.
Key Features:
- Clear LCD Display: Provides easy and clear access to information such as speed, odometer, trip distance, RPM, gear position, and turn signal indicators.
- Speed Measurement: Supports both km/h and mph, with a display range of 0-199 km/h (miles).
- Odometer & Trip Meter: Odometer displays 0-999999 km (miles), and trip distance displays up to 999.9 km (miles).
- RPM Display: Tachometer range from 0 to 13000 r/min.
- Durable Construction: Made from high-quality ABS material, ensuring hardness, durability, and corrosion resistance.
- Universal Compatibility: Suitable for 1, 2, and 4-cylinder motorcycle models.
2. Setup and Installation
Proper installation is crucial for the correct functioning of your Yosoo Motorcycle LCD Meter. It is recommended to have this installed by a qualified professional if you are unfamiliar with motorcycle electrical systems.
Image 2.1: Components of the Yosoo Motorcycle LCD Meter, including the main unit, speed sensor, and wiring harness.
2.1 Wiring Diagram (General Guide)
While a specific wiring diagram is not provided in this manual, the meter typically connects to your motorcycle's electrical system for power, speed signal, RPM signal, gear position, and indicator lights. Consult your motorcycle's service manual for specific wiring colors and locations.
Common Connections:
- Power: Connect to a switched 12V DC power source and ground.
- Speed Sensor: Connect the included speed sensor to the meter and mount it appropriately on your wheel for accurate speed readings.
- RPM Signal: Connect to the ignition coil or ECU for engine RPM readings.
- Indicator Lights: Connect to turn signals (left/right), high beam, neutral gear, and oil pressure warning lights.
- Gear Position: Connect to the motorcycle's gear position sensor (if available).
2.2 Initial Settings
After installation, you may need to perform initial settings to calibrate the meter for your specific motorcycle. This typically involves setting wheel circumference, number of cylinders, and other parameters.
- Ensure the motorcycle's ignition is OFF.
- Press and hold the SEL button (left button) on the meter.
- While holding the SEL button, turn the ignition key to the ON position.
- The meter should enter a setup mode, prompting for a password. Enter the password 6610.
- Once in the setup menu, use the SEL button (short press to cycle, long press to confirm/enter sub-menu) and SET button (right button, for value adjustment) to configure settings such as:
- Wheel circumference (for accurate speed/distance)
- Number of engine cylinders (1, 2, or 4)
- Speed unit (km/h or mph)
- Time setting (24-hour format)
- After configuring all necessary settings, exit the setup mode by long-pressing the SEL button or turning off the ignition.
3. Operating Instructions
The Yosoo Motorcycle LCD Meter provides real-time information to enhance your riding experience. Familiarize yourself with the display and button functions.
3.1 Display Functions
- Speed Display: Shows current riding speed in km/h or mph.
- RPM Display: Indicates engine revolutions per minute.
- Odometer (ODO): Displays total accumulated distance traveled.
- Trip Meter (TRIP): Displays resettable trip distance.
- Gear Position Indicator: Shows the current gear (1-6) or Neutral (N).
- Fuel Gauge: Displays the fuel level in a 6-section bar.
- Turn Signal Indicators: Left and right arrow icons illuminate when turn signals are active.
- High Beam Indicator: Blue light illuminates when high beam is active.
- Other Warning Lights: May include oil pressure, engine check, or ABS indicators depending on motorcycle compatibility.
3.2 Button Functions
The meter features two buttons, typically labeled SEL (Select) and SET (Set), for navigating menus and adjusting settings.
- SEL Button (Left):
- Short press: Cycle through display modes (e.g., ODO, TRIP).
- Long press: Enter/exit setup mode, confirm selections within menus.
- SET Button (Right):
- Short press: Adjust values or options within setup menus.
- Long press: May have specific functions depending on the current display mode (e.g., reset trip meter).
4. Maintenance
To ensure the longevity and optimal performance of your Yosoo Motorcycle LCD Meter, follow these simple maintenance guidelines:
- Cleaning: Use a soft, damp cloth to clean the display and casing. Avoid abrasive cleaners or solvents that could damage the screen or plastic.
- Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion.
- Protection: While the meter is waterproof, avoid directing high-pressure water jets directly at the unit during washing.
- Storage: If storing the motorcycle for an extended period, ensure the meter is clean and protected from extreme temperatures.
5. Troubleshooting
If you encounter issues with your Yosoo Motorcycle LCD Meter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Meter does not power on. | No power supply; loose wiring; blown fuse. | Check power connections, ensure wiring is secure. Inspect motorcycle's fuse box for blown fuses. |
| Cannot enter setup mode. | Incorrect button sequence; incorrect password. | Ensure you are pressing and holding the SEL button while turning the ignition ON. Verify password 6610. |
| Speed or distance readings are inaccurate. | Incorrect wheel circumference setting; speed sensor issue. | Re-enter setup mode and verify the wheel circumference setting. Check speed sensor connection and mounting. |
| Fuel gauge displays full after a few seconds, regardless of actual level. | Incompatibility with motorcycle's fuel sender; incorrect wiring. | This behavior may indicate an incompatibility with certain fuel sender types. Ensure the fuel gauge wire is correctly connected. If the issue persists, the fuel gauge function may not be fully compatible with your specific motorcycle's fuel sender unit. |
| Gear position display is blank or incorrect. | Gear position sensor not connected or faulty. | Ensure the gear position sensor wire is correctly connected to the meter. If your motorcycle does not have a gear position sensor, this function will not display. |
If the problem persists after attempting these solutions, please contact customer support.
6. Specifications
| Feature | Specification |
|---|---|
| Condition | 100% Brand New |
| Item Type | Motorcycle Instrument |
| Material | ABS |
| Color | Black |
| Time | 24 Hours |
| Oil Level Display | 6-section display |
| Power Voltage | DC 8-12V |
| Speed Display | Km/H, Mph |
| Gear Position | 1/2/3/4/5/6 N |
| Speed Display Range | 0-199 km/h (miles) |
| Internal Display | <0.5 seconds |
| Odometer Display | 0-999999 kilometers (miles) |
| Odometer Display Unit | 0.1 km |
| Trip Distance Display | 999.9 km (miles) |
| RPM Range | 0-13000 R/Min |
| Size (Approx.) | 200 x 180 x 100 mm / 7.9 x 7 x 3.9 inches |
7. Warranty and Support
Yosoo Health Gear is committed to providing high-quality products. For any warranty claims, technical support, or inquiries regarding your Motorcycle LCD Meter, please contact the seller or Yosoo Health Gear customer service directly.
Please retain your proof of purchase for warranty purposes. Specific warranty terms and conditions may vary depending on your region and retailer.