Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MakeFit Filtered Shower Head with Handheld Combo. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
Safety Information
- Ensure all connections are tightened properly to prevent leaks.
- Do not use abrasive cleaners or harsh chemicals on the shower head finish.
- Always test water temperature before showering to prevent scalding.
- Keep small parts away from children.
Product Overview
The MakeFit 2-in-1 Dual Shower Head Combo Set combines a fixed shower head with a versatile handheld shower. It features a high-pressure massage shower head for tension relief and a handheld shower head with multiple settings including rain, massage, mist, and pause mode. The system includes a revolutionary filter for hard water, designed to remove chlorine, fluoride, heavy metals, and other contaminants.
Components Included:
- 10 Modes Handheld Shower Head x 1
- 79-inch Stainless Steel Shower Hose x 1
- Filtered Massage Shower Head x 1
- Shower Water Filter (pre-installed) x 1
- Teflon Tape & Extra Rubber Washer x 1
Setup and Installation
Installation of the MakeFit shower head is designed to be quick and tool-free. Follow these steps for a hassle-free setup:
- Prepare the Shower Arm: Remove your existing shower head from the shower arm. Clean any old sealant or residue from the threads of the shower arm.
- Apply Teflon Tape: Wrap the provided Teflon tape clockwise around the threads of your shower arm 3-5 times.
- Install the Filtered Massage Shower Head: Screw the main filtered massage shower head unit onto the shower arm. Hand-tighten firmly.
- Connect the Handheld Hose: Attach one end of the 79-inch stainless steel shower hose to the handheld shower head and the other end to the designated port on the main shower unit. Ensure rubber washers are in place at both connections. Hand-tighten.
- Test for Leaks: Turn on the water supply and check for any leaks. If leaks occur, tighten connections slightly more or reapply Teflon tape.
The transparent filter cartridge is pre-installed and allows you to visually monitor when replacement is needed.
Figure 1: Step-by-step visual guide for installing the MakeFit Filtered Shower Head with Handheld Combo. This image illustrates the process of attaching the main unit to the shower arm, connecting the hose, and the visible filter cartridge.
Operating Instructions
Your MakeFit shower system offers a variety of spray patterns and dual functionality for a customized shower experience.
- Selecting Water Flow: Use the diverter knob on the main unit to switch between the fixed shower head, the handheld shower head, or both simultaneously.
- Adjusting Handheld Spray Modes: The handheld shower head features 10 distinct spray modes. Rotate the dial on the face of the handheld unit to cycle through settings such as rain, massage, mist, and a pause mode.
- Massage Shower Function: The fixed shower head provides a high-pressure massage spray, ideal for relieving muscle tension in the shoulders, neck, and back.
- Point Jet Mode: For cleaning tasks, press the button on the back of the handheld shower head to activate the powerful Point Jet Mode. This concentrated stream is effective for cleaning tiles, bathtubs, and hard-to-reach areas.
- Adjusting Angle: The main unit features an angle-adjustable brass swivel ball joint, allowing you to direct the fixed shower head to your preferred height and angle.
Figure 2: The fixed shower head delivers a powerful massage spray, designed to target and relieve tension in the shoulder and neck areas.
Figure 3: This image displays the versatility of the dual shower system, showing how the handheld unit can be used independently or in combination with the fixed massage sprays, along with a visual representation of the 10 distinct spray patterns.
Figure 4: The handheld shower head features a unique built-in Power Wash Mode, activated by a button, which provides a strong, concentrated stream for effective bathroom cleaning tasks.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your MakeFit shower head.
- Filter Replacement: The transparent filter cartridge allows you to see when it needs replacing. The frequency of replacement depends on your water quality and usage. To replace, unscrew the cap on the side of the main unit, remove the old filter, and insert a new one.
- Cleaning Nozzles: The anti-clog nozzles are designed for easy cleaning. Gently rub the rubber nozzles with your finger or a soft brush to remove any mineral buildup.
- General Cleaning: Clean the exterior of the shower head and hose with a soft cloth and mild soap. Avoid abrasive cleaners.
Figure 5: An illustration of the advanced filtration technology within the MakeFit shower head, detailing the layers of KDF-55, silver ion balls, activated carbon, and calcium sulfite balls that work to purify water.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Pressure | Clogged nozzles or filter. | Clean the rubber nozzles by gently rubbing them. Replace the filter cartridge if it appears discolored or significantly reduces flow. |
| Leaks at Connections | Loose connections or missing/damaged washers. | Ensure all connections are hand-tightened. Check that rubber washers are correctly seated. Reapply Teflon tape if necessary. |
| Water Not Switching Between Modes | Diverter knob or handheld dial is stuck or faulty. | Ensure the diverter knob and handheld dial are fully rotated to the desired position. If persistent, contact customer support. |
Specifications
- Brand: MakeFit
- Model Number: SSJ731CP
- Style: 10 Modes
- Color: Chrome
- Material: Acrylonitrile Butadiene Styrene, Brass
- Finish Type: Polished
- Installation Type: Wall Mounted
- Product Dimensions: 11.8"L x 9.4"W
- Number of Settings: 10
- Efficiency: 2.0 GPM (7.6 LPM) or less
- Hose Length: 79-inch Stainless Steel
- Special Features: Dual Shower Head Combo, High Pressure Massaging Shower Head, Detachable Handheld Shower Head, Easy to install, Replaceable Shower Head Filter
Warranty and Support
All MakeFit products come with a 2-year warranty. For warranty claims, technical support, or replacement parts, please contact MakeFit customer service through the retailer where the product was purchased or visit the official MakeFit website.
UPC: 799947561186