Eascookchef GC001-122S

Eascookchef 12-Inch 2-Burner Gas Cooktop Instruction Manual

Model: GC001-122S

1. Introduction

Thank you for choosing the Eascookchef 12-Inch 2-Burner Gas Cooktop. This manual provides essential information for the safe installation, operation, and maintenance of your appliance. Please read it thoroughly before use and keep it for future reference.

2. Important Safety Information

WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.

  • Ensure proper ventilation when operating the cooktop.
  • Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
  • Never use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the cooktop.
  • Keep children away from the cooktop during operation and while it is cooling down.
  • This appliance is designed for cooking purposes only.
  • Ensure all gas connections are secure and leak-free before operation.
  • The cooktop is equipped with a thermocouple flame-out failure system (FFD) for safety, which automatically shuts off gas if a flame is not detected.

3. Product Features

The Eascookchef 12-Inch Gas Cooktop is designed for efficiency and safety, featuring a durable stainless steel surface and powerful burners.

Exploded view of Eascookchef 2-burner gas cooktop components

Image: Exploded view showing the cooktop's components including cast-iron burner caps, cast-iron grates, heat-resistant aluminum burners, stainless steel panel, and melt-proof bakelite knobs.

  • Brushed Stainless Steel Surface: Corrosion-resistant, wear-resistant, and easy to clean.
  • Two Sealed Burners: Features a 5,000-BTU burner and a 10,500-BTU burner for varied cooking needs.
  • NG/LPG Convertible: Pre-installed for Natural Gas (NG) with extra LPG nozzles included for conversion.
  • Thermocouple Protection: Automatically shuts off gas supply if the flame extinguishes, preventing gas leakage.
  • Melt-Proof and Anti-Scalding Knobs: Equipped with a child protection lock requiring a press and rotate action to ignite.
  • Heavy-Duty Cast Iron Grates: Provides stable support for various pots and pans without deformation or slippage.
Eascookchef cooktop with thermocouple protection feature highlighted

Image: The cooktop in use with a pot and pan, highlighting the thermocouple sensor for flame-out protection.

Eascookchef cooktop showing 10,500 BTU and 6,414 BTU burners

Image: The cooktop with flames indicating the power of each burner: 10,500 BTU and 6,414 BTU (note: product description states 5,000 BTU and 10,500 BTU, image shows 6,414 BTU and 10,500 BTU).

4. Installation

4.1 Dimensions and Cut-out

Ensure your countertop opening matches the required cut-out dimensions for a proper built-in installation.

Diagram showing product and cut-out dimensions for Eascookchef 12-inch cooktop

Image: Product dimensions: 11.42" W x 19.69" L x 3.54" H. Cut-out dimensions: 10.47" W x 18.81" L.

4.2 Gas Type Conversion (NG/LPG)

The cooktop is pre-configured for Natural Gas (NG). If using Liquefied Petroleum Gas (LPG), conversion is required using the included LPG nozzles. This procedure should be performed by a qualified technician.

4.3 Electrical Connection

The cooktop requires a 120V power supply for ignition. A pre-installed 120V power cord is provided.

4.4 What's in the Box

Verify all components are present before beginning installation.

Contents of the Eascookchef cooktop package including LPG nozzles and installation hardware

Image: Included components: LPG nozzles, mounting brackets, screws, and sealing tape. Note: Natural gas pressure regulator and gas pipe are NOT included.

5. Operation

5.1 Ignition

To ignite a burner, press down on the corresponding control knob and rotate it counter-clockwise to the 'High' flame setting. Hold the knob down for a few seconds until the flame is stable. Release the knob. If the flame extinguishes, repeat the process.

5.2 Adjusting Flame

Once ignited, rotate the control knob to adjust the flame intensity from 'High' to 'Low' as needed for cooking. The flame should be blue and stable.

5.3 Thermocouple Safety Feature

This cooktop is equipped with a thermocouple safety device. If the flame accidentally goes out, the thermocouple will detect the absence of heat and automatically shut off the gas supply to that burner, preventing gas leakage.

Video: An overview of the Eascookchef Stainless Steel Gas Cooktop, demonstrating its features and operation.

6. Maintenance and Cleaning

6.1 Cleaning the Stainless Steel Surface

Clean the stainless steel surface regularly with a soft cloth and mild detergent. Avoid abrasive cleaners or scouring pads that can scratch the surface. For stubborn stains, use a stainless steel cleaner.

Hand cleaning a stainless steel cooktop surface with a cloth

Image: A hand wiping the stainless steel cooktop surface with a cloth, demonstrating easy cleaning.

6.2 Cleaning Burner Components

The cast iron grates and burner caps can be removed for cleaning. Wash them with warm soapy water and dry thoroughly before replacing. Ensure burner ports are clear of food debris.

6.3 General Care

  • Do not install the stove in a damp, closed environment, as long-term moisture can cause rust.
  • Regularly check gas connections for any signs of wear or leaks.
  • Ensure the cooktop is cool before cleaning or performing any maintenance.

7. Troubleshooting Guide

ProblemPossible CauseSolution
Burner does not igniteNo gas supply; Power outage; Clogged burner port; Ignition electrode dirty/damaged.Check gas valve; Verify power supply; Clean burner ports; Contact service.
Flame is yellow or unevenBurner ports clogged; Incorrect gas type/pressure; Air shutter adjustment needed.Clean burner ports; Ensure correct gas type and pressure; Contact a qualified technician for air shutter adjustment.
Gas odor detectedGas leak.Immediately turn off gas supply, open windows, do not operate electrical switches, evacuate premises, and call gas company/fire department.
Flame goes out after releasing knobThermocouple not heated sufficiently; Thermocouple faulty.Hold knob down longer after ignition; Contact service if problem persists.

8. Technical Specifications

FeatureSpecification
BrandEascookchef
Model NumberGC001-122S
Product Dimensions (D x W x H)19.69" x 11.42" x 3.54"
Cut-out Dimensions (W x L)10.47" x 18.81"
Number of Burners2
Burner Power (BTU)5,000 BTU and 10,500 BTU
Fuel TypeNatural Gas / LPG Convertible
Ignition SystemGas Pilot (120V)
Control TypeKnob
Heater Surface MaterialStainless Steel
Special FeatureAutomatic Shut-Off (Thermocouple Protection)
Included ComponentsLPG Nozzles
UPC760701895304

9. Warranty and Support

9.1 Warranty Information

This Eascookchef cooktop comes with a 1 Year Manufacturer Warranty. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use.

9.2 Customer Support

For technical assistance, troubleshooting, or warranty inquiries, please contact Eascookchef customer support. Refer to the contact information provided with your purchase or visit the official Eascookchef website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.