Introduction
Thank you for purchasing the FAMICOZY Small Digital Travel Alarm Clock. This compact and user-friendly alarm clock is designed for simplicity and portability, making it ideal for travel, bedside tables, and various small spaces. It features an easy-to-read digital display, a crescendo alarm, and a convenient snooze function with a soft backlight. Please read this manual carefully to ensure proper use and to get the most out of your device.

Figure 1: Front view of the FAMICOZY Small Digital Travel Alarm Clock displaying 10:08 AM.
Product Features
- Compact and Portable Design: Ideal for travel and small spaces.
- Clear Digital Display: Easy to read time with 12/24-hour format options.
- Crescendo Alarm: Gently wakes you up with a gradually increasing alarm volume.
- Snooze Function: Provides extra sleep with a 5-minute snooze interval.
- Soft Backlight: Illuminates the display for 5 seconds when activated, without disturbing sleep.
- Battery Operated: Cordless operation with 2 x AAA batteries (not included).
Setup
1. Battery Installation
- Locate the battery compartment on the back of the alarm clock.
- Slide open the battery compartment cover.
- Insert two (2) AAA batteries, ensuring correct polarity (+ and -) as indicated inside the compartment. Note: Batteries are not included.
- Close the battery compartment cover securely.

Figure 2: Rear view of the alarm clock, highlighting the battery compartment and control buttons (MIN, HOUR, TIME, ALARM).
Operating Instructions
The FAMICOZY alarm clock features four main buttons on the back: MIN, HOUR, TIME, and ALARM. The top button serves as the SNOOZE/LIGHT button.
1. Setting the Current Time
- Press and hold the TIME button until the hour digits start flashing.
- Press the HOUR button repeatedly to adjust the hour. Pay attention to the AM/PM indicator if using 12-hour format.
- Press the MIN button repeatedly to adjust the minutes.
- Press the TIME button again to confirm and exit time setting mode.
2. Selecting 12/24-Hour Format
- While in normal time display mode, press the HOUR button once to toggle between 12-hour (with AM/PM indicator) and 24-hour formats.
3. Setting the Alarm Time
- Press and hold the ALARM button until the alarm hour digits start flashing.
- Press the HOUR button repeatedly to adjust the alarm hour.
- Press the MIN button repeatedly to adjust the alarm minutes.
- Press the ALARM button again to confirm and exit alarm setting mode.
4. Activating/Deactivating the Alarm
- While in normal time display mode, press the ALARM button once to toggle the alarm on or off.
- When the alarm is active, a bell icon (🔔) will appear on the display.

Figure 3: Close-up of the clock display showing the time and the alarm-on indicator (bell icon).
5. Snooze Function and Backlight
- When the alarm sounds, press the large button on the top of the clock to activate the snooze function. The alarm will pause for 5 minutes and then sound again.
- To activate the soft backlight, press the large button on the top of the clock. The display will illuminate for approximately 5 seconds and then turn off automatically. This feature is designed not to disturb sleep.

Figure 4: The alarm clock display with its soft backlight activated, showing the time. The backlight remains on for 5 seconds.
6. Stopping the Alarm
- To stop the alarm completely after it sounds (and not just snooze), press any of the MIN, HOUR, or TIME buttons on the back of the clock. The alarm will reset for the next day.
Maintenance
- Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: Replace batteries when the display dims or the alarm volume decreases. Always use fresh AAA batteries. Remove batteries if the clock will not be used for an extended period to prevent leakage.
- Storage: Store the clock in a cool, dry place away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock display is blank or dim. | Batteries are low or incorrectly installed. | Replace with new AAA batteries, ensuring correct polarity. |
| Alarm does not sound. | Alarm is not activated or alarm volume is too low (not adjustable on this model, but check if it's sounding at all). | Press the ALARM button to ensure the bell icon is displayed. Replace batteries if the sound is weak. |
| Time or alarm cannot be set. | Buttons are not being pressed and held correctly, or batteries are too low. | Ensure you press and hold the TIME or ALARM button until digits flash. Replace batteries if necessary. |
| Backlight does not work. | Batteries are low. | Replace with new AAA batteries. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | FG-21 |
| Brand | FAMICOZY |
| Dimensions (L x W x H) | 3.54" x 2.04" x 1.06" (approx.) |
| Weight | 2.08 ounces (without batteries) |
| Power Source | 2 x AAA Batteries (not included) |
| Display Type | Digital |
| Material | Plastic |
| Color | Black |
| Special Features | Clear display, gradual rise alarm, compact size, silent operation, snooze, backlight. |

Figure 5: Size comparison of the alarm clock with a credit card, illustrating its compact and portable dimensions.
Warranty and Support
FAMICOZY products are designed for reliability and performance. For warranty information or technical support, please refer to the product packaging or contact FAMICOZY customer service directly.
You can typically find contact information on the official FAMICOZY website or through your purchase platform. Please have your model number (FG-21) and purchase details ready when contacting support.





