1. Introduction
Thank you for choosing the Belord Outdoor Swivel Rocker Patio Chairs. This manual provides essential information for the safe assembly, operation, and maintenance of your new patio chairs. Please read these instructions carefully before assembly and retain them for future reference.
The Belord Outdoor Swivel Rocker Patio Chairs are designed for outdoor use, offering both swivel and gliding functionality for enhanced comfort. They feature a durable wicker construction and sturdy alloy steel frame, complemented by weather-resistant cushions.
2. Safety Information
Always prioritize safety during assembly and use. Failure to follow these safety guidelines may result in injury or damage to the product.
- Ensure all components are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
- Assemble the chairs on a soft, flat, and stable surface to prevent scratching and ensure stability.
- Do not overtighten screws during initial assembly. Tighten all screws fully only after the entire unit is assembled and stable.
- Keep children and pets away from the assembly area. Small parts can be a choking hazard.
- Do not exceed the maximum weight capacity of 350 lbs per chair.
- Regularly inspect the chairs for loose bolts, damaged wicker, or worn cushions. Tighten or replace as necessary.
- Avoid placing the chairs near open flames or extreme heat sources.
- Use caution when rocking or swiveling to prevent tipping or injury.
3. Package Contents
Your Belord Outdoor Swivel Rocker Patio Chairs package includes the following components. Please verify all parts are present before proceeding with assembly.
- 2 x Swivel Rocker Chair Frames (Brown Wicker)
- 2 x Seat Cushions (Beige)
- 2 x Back Cushions (Beige)
- Assembly Hardware Kit (screws, washers, Allen wrench)
- Instruction Manual
Image: Product dimensions for the Belord Swivel Rocker Chair. The chair measures 31.75 inches wide, 35 inches high, and 32 inches deep. The seat cushion is 4 inches thick.
4. Assembly Instructions
Assembly is required for the Belord Outdoor Swivel Rocker Patio Chairs. It is recommended to have two people for easier assembly. An Allen wrench is provided, but an electric screwdriver with an appropriate Allen bit can expedite the process.
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent damage.
- Identify Parts: Refer to the parts list and diagrams to identify each component.
- Initial Assembly (Loose Screws): Begin attaching the chair frame components. Insert screws loosely at first. This allows for adjustment and alignment of parts.
- Align and Tighten: Once all frame components are loosely assembled and aligned, place the chair on a flat surface. Gradually tighten all screws evenly until secure. Do not overtighten.
- Attach Cushions: Place the seat and back cushions onto the assembled chair frame.
Image: Assembly instructions overview. This table indicates that 2 Swivel Rockers have an estimated assembly time of 40 minutes.
Image: Illustration of the 360-degree swivel feature. The chair base is made of high-strength iron alloy with an anti-rust coating, allowing for smooth rotation.
Image: Illustration of the gliding motion. The chair combines rotation and gliding, featuring anti-slip protectors on the base.
Image: Cushion restoration guide. Unpack the box, open the vacuum bag, squeeze and fluff the cushion, then allow 24-48 hours for full fluffiness and 7-15 days for minor creases to disappear.
5. Operating Instructions
The Belord Swivel Rocker Patio Chairs offer dual functionality for your comfort:
- Swivel Function: The chair base is designed to rotate 360 degrees. Simply apply gentle pressure with your feet to turn the chair in any direction.
- Gliding Function: The chair also features a smooth gliding motion. Lean back and forth gently to experience the rocking movement.
Image: Ergonomic design features. The chair has a 22-inch high back, 24-inch deep seat, 18-inch seat height, and 4-inch broad armrest for comfort.
6. Maintenance
Proper care and maintenance will extend the life of your Belord patio chairs.
- Cleaning the Frame: Wipe the wicker and alloy steel frame with a damp cloth. For stubborn dirt, use a mild soap solution and rinse thoroughly. Avoid harsh chemicals or abrasive cleaners.
- Cushion Care: The cushions are made from premium OLEFIN fabric, which is sun, water, and fade resistant. The covers are removable for cleaning. Hand wash with mild soap and cold water, or spot clean. Air dry only; do not machine wash or tumble dry.
- Seasonal Storage: During prolonged periods of non-use or harsh weather conditions, it is recommended to store the chairs and cushions in a dry, protected area to prevent wear and tear.
- Hardware Check: Periodically check all bolts and connections to ensure they remain tight. Retighten as needed.
Image: Cushion features. Shows a 4-inch thick foam cushion made from high resilience foam with a water-resistant, removable cover.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair wobbles after assembly. | Screws not tightened evenly or fully. | Loosen all screws slightly, gently rock the chair to settle, then tighten all screws evenly and firmly. |
| Difficulty aligning screw holes during assembly. | Parts are not correctly oriented or screws are overtightened prematurely. | Ensure all parts are oriented as per the diagram. Do not fully tighten any screws until all parts are loosely connected. |
| Cushions appear flat or creased upon arrival. | Cushions are vacuum-sealed for shipping. | Allow 24-48 hours for cushions to expand fully. Gently fluff them to aid restoration. Minor creases may take 7-15 days to disappear. |
| Chair does not swivel or glide smoothly. | Obstruction in the mechanism or lack of lubrication. | Check for any debris under the base. Ensure the chair is on a level surface. If issues persist, contact customer support. |
8. Specifications
- Model Number: 023-2
- Product Dimensions (L x W x H): 32 x 31.75 x 35 inches
- Item Weight: 88 pounds (per set of 2)
- Material: Alloy Steel frame, Resin Wicker, Olefin Fabric cushions
- Color: Brown Wicker / Beige Cushion
- Special Features: Hand-woven wicker, 360-degree swivel, gliding motion, water-resistant, sun-resistant, anti-fading, anti-dry crack.
- Maximum Weight Capacity: 350 lbs per chair
- Assembled Seat Height: 14 inches
9. Warranty and Support
Belord offers a 12-month warranty for this product. If you encounter any issues or have questions regarding your Belord Outdoor Swivel Rocker Patio Chairs, please contact our customer support team directly.
Our dedicated customer support team aims to respond quickly within 24 hours to assist you with any concerns, including missing parts or assembly guidance.
For support, please refer to the contact information provided at the point of purchase or visit the official Belord website.
Image: Belord Customer Support. Highlights efficient U.S. shipping and dedicated customer support.