Introduction
This manual provides detailed instructions for the safe and efficient operation of your Generic Ride & Cars Beetle Car Speaker, Model WS-1958BT. This portable Bluetooth speaker features a unique beetle car design, LED lights, and multiple connectivity options including Bluetooth, AUX, USB, and SD card. Please read this manual thoroughly before using the product and retain it for future reference.
Setup
1. Charging the Speaker
Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's charging port and the other end to a standard USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off when fully charged.
Image: Rear view of the Beetle Car Speaker, highlighting the USB, SD card, and AUX input ports for connectivity and charging.
2. Powering On/Off
To power on the speaker, locate the power button (usually integrated with the mode/play controls) and press and hold it for a few seconds until you hear an audible prompt or see the LED lights activate. To power off, press and hold the same button again.
3. Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode. If not, press the 'Mode' button until you hear a Bluetooth pairing prompt. The LED lights may flash to indicate pairing mode.
- On your device (smartphone, tablet, laptop), enable Bluetooth and search for available devices.
- Select "WS-1958BT" or a similar name from the list of found devices.
- Once paired, the speaker will emit a confirmation sound, and the LED lights may change their pattern.
4. Connecting via AUX Input
Connect one end of a 3.5mm audio cable (not included) to the AUX port on the speaker and the other end to the audio output jack of your device. The speaker will automatically switch to AUX mode or require a press of the 'Mode' button.
5. USB/SD Card Playback
Insert a USB flash drive or an SD card (with supported audio files) into the respective port on the speaker. The speaker will automatically detect the media and begin playback. Use the 'Mode' button to switch to USB or SD card mode if necessary.
Operating Instructions
1. Basic Controls
- Power/Mode Button: Press and hold to power on/off. Short press to cycle through input modes (Bluetooth, AUX, USB, SD, FM).
- Play/Pause: In Bluetooth/USB/SD mode, short press to play or pause audio.
- Volume Up/Next Track: Short press for next track. Press and hold to increase volume.
- Volume Down/Previous Track: Short press for previous track. Press and hold to decrease volume.
- LED Light Control: Specific button or combination of buttons may control LED light patterns or turn them on/off. Refer to the device's physical controls.
Image: The Beetle Car Speaker demonstrating its LED light feature on the roof.
2. Hands-Free Calling (Bluetooth Mode)
When connected via Bluetooth to a smartphone, the speaker can be used for hands-free calls. Answering/ending calls is typically done by a short press of the Play/Pause button. Rejecting a call may involve a long press of the same button.
3. TWS (True Wireless Stereo) Function
If you have two WS-1958BT speakers, you can pair them together for a True Wireless Stereo experience. Power on both speakers. On one speaker, press and hold the TWS button (if available) or a specific combination of buttons until you hear a pairing prompt. The two speakers will connect automatically. Then, pair your device to the primary speaker via Bluetooth as usual.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners, alcohol, or solvents.
- Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in active use.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the battery is charged. Connect the speaker to a power source using the USB cable. |
| Cannot pair via Bluetooth. |
|
| No sound or low volume. |
|
| LED lights are not working. | Check if the LED light function is enabled via the speaker's controls. |
Specifications
- Model: WS-1958BT
- Brand: Generic
- Connectivity: Bluetooth, AUX (3.5mm), USB, SD Card
- Speaker Type: Surround Sound
- Audio Output Mode: Surround
- Surround Sound Channel Configuration: 2.1
- Special Features: Portable, LED Lights, Hands-free Calling, TWS Support
- Control Method: Touch (referring to integrated buttons)
- Compatible Devices: Desktop, Laptop, MP3 Player, Projector, Smartphone, Tablet, Television
- Speaker Maximum Output Power: 2 Watts
- Product Dimensions: 9.75 x 4 x 3.75 inches (24.76 x 10.16 x 9.52 cm)
- Item Weight: 2.42 pounds (1.1 kg)
- Waterproof: No
- UPC: 363307154211, 363307153795
Image: Dimensions of the Beetle Car Speaker, showing its length, width, and height.
Warranty Information
Specific warranty information for this product is not provided in the available documentation. Please refer to the retailer or point of purchase for details regarding warranty coverage and terms.
Customer Support
For further assistance or inquiries, please contact the retailer or the manufacturer directly. Keep your purchase receipt and product model number (WS-1958BT) ready when seeking support.
