Dimplex 60 Inch Slim Built-in Linear Electric Fireplace Heater User Manual

Introduction

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Dimplex 60 Inch Slim Built-in Linear Electric Fireplace Heater. Please read all instructions carefully before installation and use.

The Dimplex 60 Inch Slim Built-in Linear Electric Fireplace is designed with a shallow depth, allowing for flush installation into 2-inch x 4-inch framing or wall mounting. It features Multi-Fire SL Technology for multi-layered flame effects, customizable flame colors (Yellow, Orange, Blue, Mixed), and adjustable flame speed. An acrylic crystal ember bed is included, with adjustable crystal colors. The unit provides supplemental heat for areas up to 400 sq ft and includes a remote control for adjusting temperature, fan speed, and a built-in timer.

Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

• Read all instructions before using this heater.
• Do not operate any heater with a damaged cord or plug or after the heater malfunctions, has been dropped or damaged in any manner.
• Do not use outdoors.
• This heater is not intended for use in bathrooms, laundry areas and similar indoor locations.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
• To disconnect heater, turn controls to off, then remove plug from outlet.
• Connect to properly grounded outlets only.
• Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
• To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
• Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).

Product Overview

The Dimplex 60 Inch Slim Built-in Linear Electric Fireplace Heater offers a modern aesthetic with advanced flame technology and heating capabilities. Its slim profile allows for versatile installation options.

Figure 1: Front view of the Dimplex 60 Inch Slim Built-in Linear Electric Fireplace, showcasing its vibrant multi-color flames and crystal ember bed.

Figure 2: Detailed diagram illustrating the dimensions (61-1/4" W x 19-5/8" H x 3-7/8" D) and key features of the fireplace, including hidden touch controls, Multi-Fire SL Technology, and the Flame Connect app.

Figure 3: An overview of the fireplace's features, such as Multi-Fire SL Flame Effect, Ambient Light Sensor, Built-in Timer, Heat Management, Smart Self-Diagnostics, Hardwire or Plug-in options, Slim Design, and Flush Framing.

Setup and Installation

The Dimplex Slim Electric Fireplace is designed for either built-in (flush) installation or wall-mounted installation. A wall mount installation bracket is included.

Pre-Installation Checklist:

• Ensure the installation location is suitable for the fireplace dimensions (60 inches wide).
• Verify power supply requirements (120V) and ensure a dedicated circuit is available if hardwiring.
• Unpack all components and check for any damage. Retain packaging for future transport or returns.
• Gather necessary tools: measuring tape, level, drill, screwdriver, wire strippers (for hardwire).

Built-in Installation (Flush Mount):

1. Construct a framed opening that accommodates the fireplace dimensions. The shallow 3.75-inch depth allows it to sit flush into standard 2-inch x 4-inch framing.
2. Ensure proper ventilation clearances as specified in the full installation guide (refer to manufacturer's website for detailed diagrams).
3. Slide the fireplace into the framed opening. Secure it using the provided mounting screws through the designated holes on the unit's frame.
4. Connect the electrical wiring. The unit can be hardwired or connected via an optional 120V plug-in cord kit. Consult a qualified electrician for hardwiring.
5. Install the acrylic crystal ember bed by carefully placing the crystals into the designated tray at the bottom of the firebox.

Wall Mount Installation:

1. Identify a suitable wall location, ensuring it can support the weight of the unit (88.3 pounds).
2. Attach the included wall mount bracket to the wall studs using appropriate fasteners. Use a level to ensure the bracket is perfectly horizontal.
3. Carefully lift the fireplace and hook it onto the wall mount bracket. Ensure it is securely seated.
4. Connect the electrical wiring.
5. Install the acrylic crystal ember bed.

Figure 4: Example of the fireplace seamlessly integrated into a bedroom wall, demonstrating its slim, flush-mount design.

Figure 5: The fireplace installed in a modern living room setting, highlighting its aesthetic appeal and integration into various interior designs.

Operating Instructions

Your Dimplex electric fireplace can be operated using the hidden touch controls on the unit or the included multi-function remote control.

Remote Control Functions:

• Power On/Off: Activates or deactivates the unit.
• Flame Color: Cycle through various flame color options (Yellow, Orange, Blue, Mixed) to match your preference.
• Flame Speed: Adjust the speed of the flame effect for a more dynamic or subtle display.
• Ember Bed Color: Change the color of the acrylic crystal ember bed.
• Heat On/Off: Turn the heating function on or off. The fireplace can operate with or without heat.
• Temperature Control: Adjust the desired room temperature. The unit will cycle the heater to maintain this setting.
• Fan Speed: Control the speed of the internal fan when the heater is active.
• Timer: Set a built-in timer for automatic shut-off, up to 8 hours.

Multi-Fire SL Technology:

This technology creates a multi-layered flame effect, providing a sense of depth and realism. Experiment with different flame and ember bed color combinations to create various mood themes.

Supplemental Heating:

The 1500W heater provides supplemental heat for areas up to 400 sq ft. The air circulation mode helps distribute heat efficiently, preventing static air. The heat function can be deactivated during warmer months if only the flame effect is desired.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your Dimplex electric fireplace. Always disconnect power before performing any maintenance.

Cleaning:

• Exterior: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or sprays.
• Glass Panel: Clean the glass panel with a soft cloth and a non-abrasive glass cleaner. Avoid spraying cleaner directly onto the unit.
• Air Intakes/Outlets: Periodically vacuum or brush dust from the air intake and exhaust openings to ensure proper airflow and prevent overheating.

Ember Bed:

• The acrylic crystals can be removed and gently rinsed with water if they accumulate dust or debris. Ensure they are completely dry before placing them back into the unit.

Light Bulbs:

• The flame effect uses LED technology, which has a long lifespan and typically does not require replacement.

Troubleshooting

If you experience issues with your fireplace, consult the following common troubleshooting steps before contacting customer support.

Specifications

Warranty and Support

Your Dimplex electric fireplace comes with a Limited Warranty. Please refer to the warranty documentation included with your product for specific terms and conditions.

For technical support, replacement parts, or warranty claims, please contact Dimplex customer service. Contact information can typically be found on the manufacturer's website or in the packaging materials.

It is recommended to register your product upon purchase to facilitate warranty service.