Aokitec 8 Colors Dip Powder Nail Set Instruction Manual

1. Product Overview

The Aokitec 8 Colors Dip Powder Nail Set provides a comprehensive solution for at-home nail art and manicures. This kit features 8 vibrant dip powders (10g each) designed for durability, odor-free application, and resistance to chipping and cracking. It offers a breathable, water-resistant finish without the need for a UV/LED nail lamp for curing. The set is suitable for creating various nail designs, including French manicures, and is formulated to be long-lasting.

Image 1.1: Aokitec 8 Colors Dip Powder Nail Set, showcasing the various powder colors and example nail art.

2. Components

The Aokitec 8 Colors Dip Powder Nail Set typically includes:

• 8 x Dip Powder Colors (10g each)
• Base Coat
• Activator
• Top Coat
• Brush Saver (often included in liquid sets, not explicitly listed for this specific kit but common)
• Nail File
• Cuticle Pusher
• Manicure Brush

Image 2.1: Overview of the Aokitec Dip Powder Kit components.

3. Preparation and Application Instructions

Follow these steps for optimal application and long-lasting results:

3.1 Nail Preparation

1. Remove Cuticles: Gently push back or remove cuticles using a cuticle pusher.
2. Shape and Buff: File and shape your nails to your desired length and form. Lightly buff the nail surface to ensure it is dry and clean.
3. Cleanse Nails: Remove any dust or debris from the nail surface using a dry tissue or a manicure brush.

Image 3.1: Nail preparation steps for dip powder application.

3.2 Dip Powder Application

4. Apply Base Coat: Apply a thin, even layer of the Base Coat over the entire nail surface. Ensure light application for even coverage.
5. Dip into Powder: Immediately dip your finger into the chosen dip powder. Alternatively, pour enough dip powder over the nail's surface.
6. Brush Off Excess: Wait for 5-10 seconds, then gently brush off any excess powder.
7. Repeat for Color: Repeat steps 4-6 approximately 3-5 times to achieve the desired color intensity and effect. Allow each layer to air dry for 30-60 seconds.
8. Apply Activator: Apply a thin layer of Activator over the dipped nail. Allow it to air dry for about 60 seconds.
9. Smooth Surface: Use a nail file to gently polish any uneven nail surfaces. Brush off any remaining dust.
10. Apply Top Coat: Finish by applying the Top Coat. Allow it to air dry for 50-90 seconds until completely dry and glossy.

Image 3.2: Detailed steps for applying Aokitec Dip Powder.

4. Maintenance and Removal

4.1 Longevity

When applied correctly with the base coat, activator, and top coat, Aokitec dip powder can last approximately 3-6 weeks without chipping. Proper application ensures optimal adhesion and durability.

4.2 Removal

Dip powder can typically be soaked off in about 15 minutes without damaging the natural nail bed. Consult standard dip powder removal guides for detailed steps, usually involving filing down the top layer and soaking nails in acetone.

5. Troubleshooting

• Powder Not Drying: Ensure each layer of base coat and activator is applied thinly and allowed sufficient air-drying time (60 seconds for base/activator, 50-90 seconds for top coat). Thick layers can hinder drying.
• Chipping: Proper nail preparation (filing, buffing, cleaning) and thin, even coats are crucial. Ensure the edges of the nail are sealed with each layer. Avoid excessive force or impact on nails.
• Uneven Surface: After applying the activator, use a nail file to gently smooth any uneven areas before applying the top coat.

6. Product Specifications

7. Warranty and Support

Aokitec provides a 100% satisfaction service. If you are not satisfied with your nail dip powder product, you may contact Aokitec for a refund or product exchange within 30 days of purchase, with no conditions. Please refer to the seller's contact information on the purchase platform for support.