CAYUEMUM Metal Drive Toggle and Clevis Mount Installation Manual

1. Product Overview

The CAYUEMUM Metal Drive Toggle and Clevis Mount is a high-quality aluminum replacement kit designed to upgrade the original plastic components in La-Z-Boy and Lazyboy power recliners. This kit provides enhanced durability, wear-resistance, and corrosion-resistance, ensuring a smoother and more reliable reclining mechanism. It is engineered for a perfect fit and easy installation, typically taking only a few minutes.

Figure 1.1: Complete CAYUEMUM Metal Drive Toggle and Clevis Mount Kit Components.

Figure 1.2: Comparison of original plastic parts (right) and CAYUEMUM metal replacement parts (left).

2. Package Contents

Please verify that all components are present in your package before beginning installation:

• 1 x Metal Drive Toggle Bracket
• 1 x Metal Motor End Clevis Mount Toggle
• 4 x Elastic Wear Bushings (includes 2 spare parts)
• 1 x Installation Manual (this document)

3. Setup and Installation

This replacement kit is designed for straightforward installation. Follow these steps carefully to ensure proper function and durability.

1. Prepare the Recliner: Unplug the power recliner from the electrical outlet. Carefully tilt the recliner onto its side or back to access the reclining mechanism underneath.
2. Identify Original Parts: Locate the existing plastic drive toggle and clevis mount components that are connected to the motor and the reclining frame. These are the parts you will be replacing.
3. Remove Old Parts: Carefully detach and remove the old plastic drive toggle and clevis mount. Note how they were connected to ensure correct orientation for the new metal parts.
4. Install Metal Drive Toggle Bracket: Position the new metal drive toggle bracket in place of the old plastic one. Secure it using the existing hardware or any provided new hardware, ensuring a snug fit.
5. Install Metal Motor End Clevis Mount Toggle: Attach the metal motor end clevis mount toggle to the motor shaft, replacing the corresponding plastic part. Ensure it aligns correctly with the drive toggle bracket.
6. Insert Elastic Wear Bushings: The kit includes four elastic wear bushings. Insert these bushings into the appropriate pivot points where the metal components connect to the recliner frame or motor. These bushings help reduce friction and wear. Two are for immediate use, and two are spares.
7. Verify Connections: Double-check all connections to ensure they are secure and that the new metal parts move freely without obstruction.
8. Test Functionality: Carefully return the recliner to its upright position. Plug it back into the electrical outlet and test the reclining function to ensure smooth operation.

Figure 3.1: Installed CAYUEMUM metal parts in a La-Z-Boy power recliner.

Figure 3.2: Elastic wear bushings and their application points.

Figure 3.3: Arrows indicating the installed metal components.

4. Operating Instructions

Once the CAYUEMUM Metal Drive Toggle and Clevis Mount are correctly installed, the operation of your La-Z-Boy power recliner remains unchanged. The new metal components seamlessly integrate with the existing motor and frame, enabling the recliner's mechanism to function as intended, providing smooth and reliable reclining action.

5. Maintenance

The aluminum construction of these replacement parts requires minimal maintenance. Periodically inspect the parts for any accumulation of dust, debris, or signs of loose connections. If necessary, clean the components with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the finish. No lubrication is typically required for these components.

6. Troubleshooting

If you encounter issues after installing the CAYUEMUM Metal Drive Toggle and Clevis Mount, consider the following:

• Recliner Not Operating Smoothly: Ensure all connections are secure and the new metal parts are correctly aligned with the motor and frame. Verify that no wires or fabric are obstructing the mechanism's movement.
• Partial Recline: Check if the clevis mount is fully engaged with the motor shaft and the drive toggle bracket. A loose connection can prevent full extension or retraction.
• Unusual Noises: Confirm that all bolts and screws are tightened appropriately. Ensure the elastic wear bushings are properly seated to minimize friction.

If problems persist after reviewing these points, please refer to the Warranty and Support section for assistance.

7. Product Specifications

Figure 7.1: Quality assurance and testing of CAYUEMUM components.

8. Warranty and Support

The CAYUEMUM Metal Drive Toggle and Clevis Mount comes with a 1-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For any product-related inquiries, installation assistance, troubleshooting, or to make a warranty claim, please contact our customer service. Our dedicated 12-hour online customer service team is available to provide support and resolve any issues you may encounter.

Contact Information:

• Please refer to your purchase platform or product packaging for specific contact details.